Melodeon.net Forums
Discussions => Recordings and Videos => Topic started by: Hasse on August 22, 2010, 07:51:56 PM
-
Have a look inside the Maugein Factory (http://www.ina.fr/economie-et-societe/vie-economique/video/R08030453/fabrication-d-accordeons.fr.html). I don't know a word French, but it's still a very interesting video to watch.
-
Not at all sure about their "concepts" for the accordion of the future - ie the enclosed bellows (when shut) and the "concertina style" accordion (playing two ends instead of outward facing keyboards).
-
I think that I could live with the concertina style, I found a CBA double end Bandoneon that I liked the look of on eBay the other day. Have to agree about the enclosed bellows though, looks very naff :-\
-
Apart from the enclosed bellows I think it looks pretty exciting...
-
Wot abaht all that metal pinging and scraping on the reeds then.....nice to see but I thought it was 'interdit'! >:E
-
Judging by the cars at the beginning and the haircuts - I'd say that film was somewhere around 1987 so I wouldn't worry about the naff styling - everything was pretty naff then.
-
Judging by the cars at the beginning and the haircuts - I'd say that film was somewhere around 1987 so I wouldn't worry about the naff styling - everything was pretty naff then.
The date of the original is actually given in the notice right under the screen - 23/09/1989
As for the hidden bellows, yer man explains that this was for when the accordion is shut, i.e. not being played, or when the musician wants to connect the MIDI system and play "without sending air to the reeds". A naff concept in itself of course.
-
Interesting hammer blows at 1:10 where they seem to be adjusting a reed frame.
-
hmmm, Flash. :( >:(
-
Interesting hammer blows at 1:10 where they seem to be adjusting a reed frame.
The tap on the end of the reed plate is to adjust the end clearance of the reed tongue. The opposite end of the tongue is rested on the edge of the anvil and the blow to the plate moves the tongue lengthwise by a small deformation of the rivet shank.
-
The date of the original is actually given in the notice right under the screen - 23/09/1989
Duh! Serves me right for trying to be clever.