Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: squeezebox63 on August 30, 2010, 01:42:37 PM

Title: c/f conversion to g/c
Post by: squeezebox63 on August 30, 2010, 01:42:37 PM
Has anyone tryed to convert a c/f hohner club 11B to a g/c with accidentals.
I really like the construction and feel of the club. very nice feel to the keyboard, very solid construction.
Just don't like the c/f configuration. No offense to you c/f players, just a personal choice.
i've done a bit of reed work, so I think I can handle It , But there must be some roadblocks I havent thought of.{ I know I could buy a g/c with accidentals but I would rather convert the hohner}
Welcome your input.
Cliff.
Title: Re: c/f conversion to g/c
Post by: Theo on August 30, 2010, 02:31:26 PM
I think I would start off by looking for a G/C two row Hohner that would provide most of the reeds, then there would be plenty of spares to use for the half row.  If you re-use the original reeds you will need a good few extra reeds for the low notes on the G row.
Title: Re: c/f conversion to g/c
Post by: squeezebox63 on August 30, 2010, 05:47:29 PM
I was thinking of reusing what I can, also moving the c row to the inside row and buying the rest that I need. also for extras on the 3rd row , for sure C#s, Bbs,Ebs,F#push.
Does this sound feasible.
Title: Re: c/f conversion to g/c
Post by: Theo on August 30, 2010, 06:18:45 PM
Almost anything is possible, it just depends how much time/money/skill you have available.  Hohner don't make it easy to buy odd collections of reeds, for example for the accidentals and the low end of the G row.  The C row reeds will be fine moved from the outside row.  The G row note pairs don't match up very well with the reeds from the F row, that's why I suggested finding a G/C 2-row as a reed donor.  If you try to retune the F row you will have a lot of filing and/or weighting with solder and you could end up with a very uneven reed response.
Title: Re: c/f conversion to g/c
Post by: squeezebox63 on September 02, 2010, 02:44:17 AM
Sounds like straight forward advice, It makes sense. guess I'll look for one. I've got some old hohners to work with so i'll give it a go.
I think they are 40's vintage.
Title: Re: c/f conversion to g/c
Post by: rees on September 02, 2010, 11:30:04 AM
Another possibility would be to find an old Hohner 1140 in G which would give you the outside row. You could then use your F row reeds (with some addjustment) to make up the accidentals.
Title: Re: c/f conversion to g/c
Post by: Theo on September 02, 2010, 11:30:38 AM
A cunning plan Mr Wesson!
Title: Re: c/f conversion to g/c
Post by: squeezebox63 on September 02, 2010, 09:35:36 PM
I'll let you know the outcome, Thanks for the input. Now to the laboratory we go.
SimplePortal 2.3.5 © 2008-2012, SimplePortal