Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: trevork on August 30, 2010, 10:56:39 PM
-
Can Castagnari Mory reeds be obtained in a sensible length of time?
If so, how?
This would be mainly to change the treble keyboard layout but also a few replacements.
Any advice much appreciated (:)
-
You would be looking for Voci Armoniche reeds then - formerly Antonelli. Website is here (http://www.vociarmoniche.it/).
However, I recommend asking Rees (of this parish) Wesson Accordion Co. (http://www.melodeons.com/) as he uses VA reeds in his own instruments. But I expect he may well reply to this thread anyway.
-
Welcome to
Bedlam Melnet. It isn't just a matter of swapping reeds. If you cannot get exact they'll need filing to tune from say C to C#, whatever,
Even if they are the exact ones you want they benefit from tweaking "setting" within the box. Then there's a resonance chamber underneath. If you change by more than a few semitones, that may benefit from a little woodwork (though I believe they can only be tuned "up")
I wouldn't personally learn on my own box. I use Paul in Cleckheaton - as it's convenient (sort of) from work. Rees (Welshpool AFAIR) is reasonably local to Cheshire, and has all the necessary skills and contacts.
-
Thanks for the advice, and the welcome (:)
The changes would be in the half row, and pretty sure they would not be more than a few semitones. The box belongs to my son who hasn't finalised his thoughts yet!
I'm thinking that it's probably best to let Rees supply and fit the reeds, and fine tune them.
My own instruments are Elkavox PA and Dino Baffetti 2 row melodeon, by the way. Plus a couple of older boxes for out-door working.
-
All things are possible.
-
.. the Kraken wakes ;)
It has been a rather hectic weekend. :|glug
-
All things are possible.
Excellent. Presumably you would need to know existing reed plate sizes as well as replacement reed pitches? Any other information needed? Obviously I'll thrash out the details through personal contact, but I think (hope) that the generalities are of interest to the forum.
-
All things are possible.
Excellent. Presumably you would need to know existing reed plate sizes as well as replacement reed pitches? Any other information needed? Obviously I'll thrash out the details through personal contact, but I think (hope) that the generalities are of interest to the forum.
Just the reed pitches will be sufficient.