Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: Steve C. on August 31, 2010, 06:39:35 PM

Title: Breaking in a new box
Post by: Steve C. on August 31, 2010, 06:39:35 PM
Are there any rules or recommendations for breaking in a new box?

This is a Benny and while it seems very fine, pretty much what I was expecting, it does not seem to speak as quickly (especially under very light air) as others I have tried.

Also, the bellows seem stiff, also in comparison to others.

Appreciate any guidance.  Thanks, regards, Steve.
Title: Re: Breaking in a new box
Post by: Sandy Flett on August 31, 2010, 06:47:04 PM
Play it lots and lots.

After 18 months a friend is still waiting for his very regularly played new Tommy to fully loosen up and respond to be anything like his 15 year old Tommy. But he has noted it steadily improving.
Title: Re: Breaking in a new box
Post by: Lester on August 31, 2010, 06:50:25 PM
You might like to read this post

http://forum.melodeon.net/index.php/topic,3457.msg51272.html#msg51272 (http://forum.melodeon.net/index.php/topic,3457.msg51272.html#msg51272)

Method of bellow loosening that worked for me
Title: Re: Breaking in a new box
Post by: Quebecois on August 31, 2010, 06:56:21 PM
This is a Benny and while it seems very fine, pretty much what I was expecting, it does not seem to speak as quickly (especially under very light air) as others I have tried.
Could 'breaking-in' really help reeds to become more responsive?!? Just curious...

Title: Re: Breaking in a new box
Post by: Theo on August 31, 2010, 07:05:12 PM
it does not seem to speak as quickly (especially under very light air) as others I have tried.

Normally that is a symptom of incorrect reed set.  If it does not improve with playing (I don't think it will)  you need to get a your favourite reed tech to take a look.
Title: Re: Breaking in a new box
Post by: Steve C. on August 31, 2010, 07:09:53 PM
Lester: wow, not for the faint-hearted.

Quebecois:  hope this is the case, as it really only sounds at maybe 10% velocity, my old pokerwork (30 years) sounds at less, hardly needs any air movement at all to sound.

Title: Re: Breaking in a new box
Post by: Steve C. on August 31, 2010, 07:11:34 PM
Maybe I have not given enough information.

Most noticeable above middle C on the C row.
Title: Re: Breaking in a new box
Post by: Rob2Hook on September 03, 2010, 03:17:29 PM
As Theo says, the question of how willing the reeds speak is a function of how they are set.  Strange observation is that some italian boxes seem prone to this, especially in the upper register, whereas Hohner long-scale reeds are much more compliant.

Rob.
Title: Re: Breaking in a new box
Post by: waltzman on September 03, 2010, 03:59:38 PM
As Theo says, the question of how willing the reeds speak is a function of how they are set.  Strange observation is that some italian boxes seem prone to this, especially in the upper register, whereas Hohner long-scale reeds are much more compliant.

Rob.

My theory is that since the higher reeds are more prone to choke if the gap is too small the tuners deliberatly leave them a little a little shy of optimal because its less work and its much easier to pass off a reed that's a little slow to speak than one that chokes.
Title: Re: Breaking in a new box
Post by: Steve C. on September 03, 2010, 09:58:16 PM
A little more information:

Seems to be mostly in the higher register and on the push only. The pulls actually are pretty good.

Same diagnosis?
SimplePortal 2.3.5 © 2008-2012, SimplePortal