Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Lester on September 08, 2010, 11:29:10 AM

Title: Hohner Project - Converting to 4th Button Start
Post by: Lester on September 08, 2010, 11:29:10 AM
As of Monday when I retire I shall be at a loose end  ;D.

So I am going to start on my project Erica and one of the things that as entered my mind is to convert it to a fourth button start. It currently has low notes rather than accidentals and I would like to add te accidentals and retain the low notes. So my question is, will I need to modify the reed blocks to achieve this other than shorthening the old first button end to take the shorter accidental reeds?
Title: Re: Hohner Project - Converting to 4th Button Start
Post by: Theo on September 08, 2010, 01:16:12 PM
Probably not.  If it is D/G (the highest pitch produced by Hohner)  the reeds usually have a narrow strip of wood waxed in below the reed plates to take up the space left by the small D/G reeds.  If extra space is needed just leave this out.
SimplePortal 2.3.5 © 2008-2012, SimplePortal