Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: cool breeze on September 08, 2010, 01:17:30 PM

Title: hohner pokework d/g chinese construction
Post by: cool breeze on September 08, 2010, 01:17:30 PM
I have heard to avoid chinese constructed hohner pokerworks.  How do you know what you are buying?  Are new ones that you buy at either a reputable online shop or a high street all made in China and only the older second hand ones constructed in Germany? Nowadays, you can buy excellent branded guitars that are now made in Korea etc but they are great. Any advice please (:)
Title: Re: hohner pokework d/g chinese construction
Post by: Theo on September 08, 2010, 01:24:52 PM
Any new Hohner pokerwork or Erica will have been made in China. You can recognise the Chinese pokerworks because of the garish brightness of the gold design,  German built ones were much less bright, even when new.  Early example of Chinese Hohners were reported to have a high rate of spring breakage,  but springs can break on German ones too.  I don't think there is anything wrong with them, apart from the shortcomings that also affect the German ones, of "approximate" tuning, and treble buttons able to disappear down the holes in the fingerboard, and noisy pallets.
Title: Re: hohner pokework d/g chinese construction
Post by: Rob2Hook on September 08, 2010, 01:28:44 PM
Well... I would give preference to a German built Hohner, but the Chinese ones are not as bad as it sounds - mostly.  The Quality Control is a bit patchy, but the products not all bad and can be fettled into a good box.  As far as I know, yes all current Pokerworks are Chinese built.  A German one will have Made in Germany on the back of the keyboard.

Rob
Title: Re: hohner pokework d/g chinese construction
Post by: Andrew Wigglesworth on September 08, 2010, 05:54:22 PM
I temporarily kidnapped several of the new Chinese Pokerworks when they started to appear and found that they were, well, Hohner Pokerworks. They felt and sounded as they ever had.

The Chinese are pretty good at making stuff ye know  ;)
Title: Re: hohner pokework d/g chinese construction
Post by: Anahata on September 08, 2010, 06:31:04 PM
The trick with cheap Chinese things (whether it's melodeons, microphones or anything else they make) where quality control is a bit variable, is to try out several and pick a good one.

Rumour has it that the more recent Chinese boxes are better made then the earlier ones.
Title: Re: hohner pokework d/g chinese construction
Post by: IanD on September 08, 2010, 09:26:44 PM
The trick with cheap Chinese things (whether it's melodeons, microphones or anything else they make) where quality control is a bit variable, is to try out several and pick a good one.

Rumour has it that the more recent Chinese boxes are better made then the earlier ones.


The same was ever true with Hohners -- when Smiffs used to own team boxes (we got through one a year) I always went down to CSH (when Gordon Potts ran the Folk Shop) and tried out several and picked the best one -- and there were always noticeable differences.

Ian
Title: Re: hohner pokework d/g chinese construction
Post by: Lester on March 12, 2012, 03:50:57 PM
I have had two chinese pokerworks through my workshop recently and thought I would share my thoughts for what they are worth:


Mind you both have sounded perfectly good after some TLC
Title: Re: hohner pokework d/g chinese construction
Post by: Quebecois on March 12, 2012, 06:03:53 PM
I think the big advantage of the Pokerwork and pre-Pokerwork design is how easy it is to fix and repair, and the fact that we can still find new parts.
Title: Re: hohner pokework d/g chinese construction
Post by: Graham Spencer on March 12, 2012, 06:58:19 PM
Nowadays, you can buy excellent branded guitars that are now made in Korea etc but they are great. Any advice please (:)

I have no idea whether the same thing applies to melodeons, but Chinese-built and Korean-built guitars are worlds apart. I have several Korean-made guitars (from the Samick factory) which are very nearly as good as the US originals they are based on; some time ago I bought a Chinese-built equivalent and I couldn't get rid of it fast enough.  I also have an Indonesian-built Telecaster that is not at all bad........

I've never tried a Chinese melodeon, and on the basis of my experience with guitars probably wouldn't be persuaded.

Graham
Title: Re: hohner pokework d/g chinese construction
Post by: AirTime on March 13, 2012, 05:16:55 PM
I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument. The key is the experience of the workers & the quality control exercised by the company that commissions & sells the finished product. We've all seen how Japanese manufacturing improved over the decades, followed by the same thing with Korean. I imagine Chinese manufacturing will follow the same pattern.

I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.
Title: Re: hohner pokework d/g chinese construction
Post by: Lester on March 13, 2012, 05:22:29 PM
I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument. The key is the experience of the workers & the quality control exercised by the company that commissions & sells the finished product. We've all seen how Japanese manufacturing improved over the decades, followed by the same thing with Korean. I imagine Chinese manufacturing will follow the same pattern.

I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.

I fully agree with the drift of your post. The problem with the Chineses pokerworks, in my opinion, is not that they are made in China and are therefore inferior but that the quality of the reeds has been reduced. This happened when the manufacture moved but is not necessarily the result of the move much more likely to have been a management cost cutting advance  ;D
Title: Re: hohner pokework d/g chinese construction
Post by: Graham Spencer on March 13, 2012, 06:54:32 PM
I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.

I have a Chinese mandolin too - an F-model. It's rubbish.  I also have a Korean A-model - a very nice instrument. Recently I played a friend's Chinese A-model; it was rubbish as well.  Neither the Korean nor the Chinese jobs are on anything like the same planet as a UK hand-made model belonging to another friend. I'm very much afraid the story with boxes will be similar.......
Title: Re: hohner pokework d/g chinese construction
Post by: AirTime on March 14, 2012, 02:38:11 AM
Quote
I have a Chinese mandolin too - an F-model. It's rubbish.  I also have a Korean A-model - a very nice instrument. Recently I played a friend's Chinese A-model; it was rubbish as well.  Neither the Korean nor the Chinese jobs are on anything like the same planet as a UK hand-made model belonging to another friend. I'm very much afraid the story with boxes will be similar.......

Well, interestingly enough, my Chinese mandolin is branded by a small US seller with a very good reputation, who used to have his instruments manufactured in Korea. He recently switched to China. My "high-end" Chinese F-model mando is very nicely made, sounds good & plays very well. I would say it's equivalent to an American-made mandolin costing at least twice as much.  I think it's now widely accepted that Chinese mandolins offer excellent quality for the money. High-end Chinese mandolins are decent instruments by any standards, although they may be inferior to the best quality, much more expensive, hand-made mandolins.

The difference with accordions is that there don't appear to be any "high-end" Chinese boxes - nothing that is trying to compete with Castagnaris or other smaller volume makers. I guess the closest thing would be the Hohner Morgane line (if they are actually made in China?), or the Sandpiper.
Title: Re: hohner pokework d/g chinese construction
Post by: Gandy on March 14, 2012, 01:27:20 PM
I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
But if the move to China was to reduce cost, then it may signal other cost-cutting changes which as you imply could perfectly well have been made which keeping production in Germany.
Title: Re: hohner pokework d/g chinese construction
Post by: Theo on March 14, 2012, 01:41:49 PM
While agreeing with the general opinion that Hohner quality is not quite as good since production moved to China, there is one significant improvement: bellows frames.  Later German bellows frames are moulded from a black plastic which is not sufficiently rigid, and is prone to pin holes breaking out.    Since the move to China they have reverted to good solid wooden bellows frames.
Title: Re: hohner pokework d/g chinese construction
Post by: Quebecois on March 14, 2012, 01:48:08 PM
I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
Remember, back in the 1960's, things "Made in Japan" would be considered junk...
During the last decade I have seen the quality of other musical instruments made in China evolve from poor to good to very good. Jupiter wind instruments is one example.
Title: Re: hohner pokework d/g chinese construction
Post by: Andrew Wigglesworth on March 14, 2012, 03:08:40 PM
I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
Remember, back in the 1960's, things "Made in Japan" would be considered junk...
During the last decade I have seen the quality of other musical instruments made in China evolve from poor to good to very good. Jupiter wind instruments is one example.


They're establishing themselves in the market and building instruments to a cost.

Basically as you say.

Who right now would pay $costalotti  prices for a Chinese instrument? Not many, they'd buy the $costalotti and bask in it's reputation and caché, so the Chinese take up the part of the market that they can (which was once filled by German manufacturers).
Title: Re: hohner pokework d/g chinese construction
Post by: Mike Averill on March 14, 2012, 07:21:37 PM
I think a lot of people judge their new Chinese Hohner against old, well fettled, German Hohners. The qualilty of the latter comes from the years of reworking,fine tuning, and natural selection ( the crap boxes get stripped for spares rather than sold on secondhand) rather than better original manufacture.

Over the years I've had a new German and a new Chinese Hohner. Both were equally badly tuned when new. Very little difference otherwise.
Title: Re: hohner pokework d/g chinese construction
Post by: Andrew Wigglesworth on March 14, 2012, 07:48:47 PM
I think a lot of people judge their new Chinese Hohner against old, well fettled, German Hohners. The qualilty of the latter comes from the years of reworking,fine tuning, and natural selection ( the crap boxes get stripped for spares rather than sold on secondhand) rather than better original manufacture.

Over the years I've had a new German and a new Chinese Hohner. Both were equally badly tuned when new. Very little difference otherwise.

A very good point.
Title: Re: hohner pokework d/g chinese construction
Post by: AirTime on March 15, 2012, 03:58:03 PM
Quote
They're establishing themselves in the market and building instruments to a cost.

Basically as you say.

Who right now would pay $costalotti  prices for a Chinese instrument? Not many, they'd buy the $costalotti and bask in it's reputation and caché, so the Chinese take up the part of the market that they can (which was once filled by German manufacturers).

You're exactly right. I think it would be interesting to know if there is a significant domestic market for accordions in China. I would bet that the cheap Chinese boxes that find their way to Europe & NA sell for a lot less in China.

I think a more pertinent criticism would be of Hohner & why they have not fixed the obvious short-comings of the Pokerworks/Erica line over the years - shortcomings which have continued irrespective of where the boxes were manufactured. I think that all that would be required is for an independent importer to travel to China & spec a higher quality box with better components - presumably this is what what was done with the Sandpiper. It also seems to be what was done with the Hohner Morgane line - although it seems unclear exactly where they are made.
Title: Re: hohner pokework d/g chinese construction
Post by: Adam-T on March 15, 2012, 04:44:08 PM
I guess if the Melodeon (or PA even) was popular the market would be flooded with superb Chinese made Pokerworkalikes (or even Castignari clones) with Stagg and other now well regarded chinese instrument makers names on at bargain prices, I don`t know about their brass or woodwind (which may well be ghastly) but Stagg make superb budget acoustic guitars, banjos and Mandos for next to nothing , they could probably sling out a well playable Tommy clone for under £300! a tenth of the price but not a 10th of the quality... they may even churn out decent reeds.

China has come on a very long way in musical instrument manufacture, I was stunned that a £35 Stagg 4/4 classical guitar I tried was even playable let alone that it actually sounded better than a Yamaha of 3X the price (though which was probably also made in China)
Title: Re: hohner pokework d/g chinese construction
Post by: EeeJay on March 15, 2012, 05:46:43 PM
... they could probably sling out a well playable Tommy clone for under £300! a tenth of the price but not a 10th of the quality... they may even churn out decent reeds.

The Chinese are getting there... (http://www.tradezz.com/buy_8732681_High-Quality-Accordion.htm)

Ed J
Title: Re: hohner pokework d/g chinese construction
Post by: Theo on March 15, 2012, 05:51:36 PM
... they could probably sling out a well playable Tommy clone for under £300! a tenth of the price but not a 10th of the quality... they may even churn out decent reeds.

The Chinese are getting there... (http://www.tradezz.com/buy_8732681_High-Quality-Accordion.htm)

Ed J

Have you tried one Ed?    Looks are not any guarantee of performance.   There were some Chinese Cairdin clones around last year.  They look wonderful but are absolutely horrible to play.
Title: Re: hohner pokework d/g chinese construction
Post by: diatonix on March 15, 2012, 06:11:55 PM
I was in Castelfidardo last week and learnt that the Chinese are placing very substantial orders for high quality reeds from both larger factories and individual reed makers. Some are afraid that they'll end up buying the whole town...
Title: Re: hohner pokework d/g chinese construction
Post by: Quebecois on March 15, 2012, 06:17:18 PM
The Chinese are getting there... (http://www.tradezz.com/buy_8732681_High-Quality-Accordion.htm)
Ed J
Funny that the accordion page is under the "Video Games Accessories" category!

And the name "Welldon"...
Title: Re: hohner pokework d/g chinese construction
Post by: Andrew Wigglesworth on March 15, 2012, 06:33:28 PM
You're exactly right. I think it would be interesting to know if there is a significant domestic market for accordions in China.

Accordions are basically China's national instrument. The market is huge.

Anecdotally, there are some very good Chinese PAs but they don't go abroad. There is also a big market for quality foreign-made accordions.

They don't play melodeons though (well, someone may, but they're really, really into big PAs and "continental chromatics").
Title: Re: hohner pokework d/g chinese construction
Post by: Steve C. on March 15, 2012, 10:06:23 PM
Met quite a lot of CBA players, especially in Shanghai, Beijing and further north.
Title: Re: hohner pokework d/g chinese construction
Post by: Quebecois on March 15, 2012, 10:12:10 PM
We often see accordion bands in movies and documentaries.
Title: Re: hohner pokework d/g chinese construction
Post by: IanD on March 15, 2012, 10:55:23 PM
Quote
They're establishing themselves in the market and building instruments to a cost.

Basically as you say.

Who right now would pay $costalotti  prices for a Chinese instrument? Not many, they'd buy the $costalotti and bask in it's reputation and caché, so the Chinese take up the part of the market that they can (which was once filled by German manufacturers).

You're exactly right. I think it would be interesting to know if there is a significant domestic market for accordions in China. I would bet that the cheap Chinese boxes that find their way to Europe & NA sell for a lot less in China.

I think a more pertinent criticism would be of Hohner & why they have not fixed the obvious short-comings of the Pokerworks/Erica line over the years - shortcomings which have continued irrespective of where the boxes were manufactured. I think that all that would be required is for an independent importer to travel to China & spec a higher quality box with better components - presumably this is what what was done with the Sandpiper. It also seems to be what was done with the Hohner Morgane line - although it seems unclear exactly where they are made.

Anything exported to Europe costs far more than it sells for in China, not just melodeons. That's market forces and economics at work, not a conspiracy against box players :-)
Title: Re: hohner pokework d/g chinese construction
Post by: AirTime on March 16, 2012, 04:03:25 AM
Quote
Accordions are basically China's national instrument. The market is huge.

Anecdotally, there are some very good Chinese PAs but they don't go abroad. There is also a big market for quality foreign-made accordions.

They don't play melodeons though (well, someone may, but they're really, really into big PAs and "continental chromatics").

I wonder if this is a reflection of the Asian interest in more "serious" instruments - the melodeon comes across as the poor cousin of the more impressive chromatic boxes.
Title: Re: hohner pokework d/g chinese construction
Post by: Graham Spencer on March 16, 2012, 07:15:18 AM
Many, many years ago - before my conversioin to push-pull - I used to play PA, and I had a very good Chinese copy of a Scandalli Polyfonico. It was actually better  than some Italian boxes I played around that time. But it wasn't cheap; OK, a good bit less than a Scandalli, but still more than I could really afford on a teacher's salary. So yes, maybe there are good instruments around in selected areas of the market.  With reference to Stagg, I've tried a couple of their guitars and one of their mandolins and they were absolutely awful bits of junk. A friend of mine has a Stagg 12-string that  is probably the worst-sounding 12-string I've ever heard - and that includes those 1960s/70s plywood cheapies that were common in the "Folk Boom".
Title: Re: hohner pokework d/g chinese construction
Post by: Adam-T on March 16, 2012, 08:30:28 AM
  With reference to Stagg, I've tried a couple of their guitars and one of their mandolins and they were absolutely awful bits of junk. A friend of mine has a Stagg 12-string that  is probably the worst-sounding 12-string I've ever heard - and that includes those 1960s/70s plywood cheapies that were common in the "Folk Boom".

I guess they vary from model to model , not suprised, I wasn`t in the least impressed with their electrics I tried (which really were awful). the steel strung dreadnought gave my Washburn a run for its money (soundwise anyway) and the classical 4/4 sounded better than the just over £100 range yamaha hung next to it. Also I guess its what you compare to. BTW some of those 70s plywood cheapies (EKO etc) are fetching decent money and are well made by todays standard .
Title: Re: hohner pokework d/g chinese construction
Post by: AirTime on March 17, 2012, 01:59:18 AM
Quote
With reference to Stagg, I've tried a couple of their guitars and one of their mandolins and they were absolutely awful bits of junk. A friend of mine has a Stagg 12-string that  is probably the worst-sounding 12-string I've ever heard - and that includes those 1960s/70s plywood cheapies that were common in the "Folk Boom".

As I understand it, you seem to be referencing the absolute rock-bottom of the mandolin market.  However,  Eastman & some other other Chinese brands deliver good quality instruments at prices much lower than a comparable "western" made instrument. I don't see any reason that Chinese made melodeons could not be built to a similar standard, although I'm not sure that they are at present.
Title: Re: hohner pokework d/g chinese construction
Post by: Tom on March 23, 2012, 06:58:30 PM
... they could probably sling out a well playable Tommy clone for under £300! a tenth of the price but not a 10th of the quality... they may even churn out decent reeds.

The Chinese are getting there... (http://www.tradezz.com/buy_8732681_High-Quality-Accordion.htm)

Ed J

astonishing!
clearly the source for the always-ebay-available boxes that every beginner looks at because they're so cheap and pretty
Title: Re: hohner pokework d/g chinese construction
Post by: Matthew Rickard on March 24, 2015, 05:40:00 PM
Hi all, I've just ordered on eBay a Hohner Pokerwork in DG. Very happy to be upgrading as my Hohner Compadre isn't really suitable for Morris. It has been an excellent starter instrument but I believe a Pokerwork is a slight step up.

Does anyone know when Hohner switch manufacturing to China? The seller listed the box as Made In Germany. It is in the post now so neither him nor I will know for sure until it arrives.
Title: Re: hohner pokework d/g chinese construction
Post by: Graham Spencer on March 24, 2015, 06:06:03 PM
With reference to a non-melodeon related posting above, I've just acquired a Chinese-built "Mandocaster" which, for the money, is a very nicely built and extremely playable instrument - a far cry from those awful Staggs of 3 or 4 years ago.  Maybe Chinese build quality is on the up........

Graham
Title: Re: hohner pokework d/g chinese construction
Post by: malcolmbebb on March 24, 2015, 06:13:21 PM
Hi all, I've just ordered on eBay a Hohner Pokerwork in DG. Very happy to be upgrading as my Hohner Compadre isn't really suitable for Morris. It has been an excellent starter instrument but I believe a Pokerwork is a slight step up.

Hi QEin,
Good luck with your Pokerwork. Never played a Compadre, so I don't know how it compares, but a Pokerwork is a safe bet for Morris. What key is the Compadre?

Does anyone know when Hohner switch manufacturing to China? The seller listed the box as Made In Germany. It is in the post now so neither him nor I will know for sure until it arrives.
I'm not sure, thought I saw it (here?) recently, but I think it was around 2000.

Malcolm
Title: Re: hohner pokework d/g chinese construction
Post by: The Blues Viking on March 28, 2015, 03:48:06 AM
Does anyone know when Hohner switch manufacturing to China? The seller listed the box as Made In Germany. It is in the post now so neither him nor I will know for sure until it arrives.

It would have been around 2000, perhaps a year or so earlier. I remember that for their first few years from China quality was way down; Castiglione stopped dealing with them for that reason, and they don't carry Hohners to this day (AFIK). Even when Hohner's build quality improved, Castiglione's opinion of them remained low.

I was working for a software developer at the time; I left that job early in 2003 so and I remember that Hohner's shift to China was a year or two before that.

I think that the Chinese boxes still carried "Made in Germany" since a tiny bit of final assembly was done there before the boxes were shipped.

But I may be wrong...my memory of that time isn't as clear as it used to be.

TBV

Title: Re: hohner pokework d/g chinese construction
Post by: Theo on March 28, 2015, 09:15:11 AM

I think that the Chinese boxes still carried "Made in Germany" since a tiny bit of final assembly was done there before the boxes were shipped.


Never seen that.

Chinese pokerworks are very easy to recognise, even from a distance.  The gold pattern is very garish bright and brassy looking.  German ones have a much more mellow dull old gold look.  Even aged the difference is quite clear.
Title: Re: hohner pokework d/g chinese construction
Post by: The Blues Viking on March 31, 2015, 04:41:18 AM
Never seen that.

Like I said, my memory is not to be relied upon.

TBV
Title: Re: hohner pokework d/g chinese construction
Post by: Theo on March 31, 2015, 07:46:15 AM
To add to the confusion one has appeared on eBay with the dull gold finish typical of German build, but marked "made in China" on the back of the keyboard!
Title: Re: hohner pokework d/g chinese construction
Post by: Barry Swanson on March 31, 2015, 07:56:32 AM


I think that the Chinese boxes still carried "Made in Germany"

TBV

...someones selling a Chinese one on ebay at the moment and it is clearly marked with "Made in China"
Title: Re: hohner pokework d/g chinese construction
Post by: Theo on March 31, 2015, 09:39:19 AM
Ooh there's and echo!  ;D
Title: Re: hohner pokework d/g chinese construction
Post by: Barry Swanson on March 31, 2015, 09:52:04 AM
...great minds theo 8)
Title: Re: hohner pokework d/g chinese construction
Post by: Matthew Rickard on March 31, 2015, 10:53:41 AM
Thanks for all the posts and comments here after I brought this thread back from the dead.

Box arrived and it was definitely made in Germany - duller gold paintwork, with "Made in Germany" on the keyboard.

Lester swapped the keyboard for a new one as the original had been painted on with enamel paint. I'm very glad the replacment keyboard also says "Made in Germany"!
Title: Re: hohner pokework d/g chinese construction
Post by: Lester on March 31, 2015, 11:43:48 AM
Thanks for all the posts and comments here after I brought this thread back from the dead.

Box arrived and it was definitely made in Germany - duller gold paintwork, with "Made in Germany" on the keyboard.

Lester swapped the keyboard for a new one as the original had been painted on with enamel paint. I'm very glad the replacment keyboard also says "Made in Germany"!

Looking to how to replace the label with "Made in Germany - Improved in Wendover"   ;)
Title: Re: hohner pokework d/g chinese construction
Post by: Nick Collis Bird on March 31, 2015, 11:59:36 AM
A soldering iron used for pokerwork would probably do the trick. 8)
Title: Re: hohner pokework d/g chinese construction
Post by: Helena Handcart on March 31, 2015, 12:28:47 PM

Looking to how to replace the label with "Made in Germany - Improved in Wendover"   ;)

Wasn't there talk of some stickers being made to that effect?  If so my girls would like some  :|||:
Title: Re: hohner pokework d/g chinese construction
Post by: brazilian.BOX on March 31, 2015, 01:26:00 PM
A soldering iron used for pokerwork would probably do the trick. 8)

Yeah, we can be tricked by such jokes. Is there any information, right information about WHEN exactly, YEAR, started the production of the Pokerworks in China?

*But it's difficult also, because is not generally easy discover the YEAR of production of a box.
Title: Re: hohner pokework d/g chinese construction
Post by: Andrew Wigglesworth on March 31, 2015, 03:07:48 PM

Looking to how to replace the label with "Made in Germany - Improved in Wendover"   ;)

Wasn't there talk of some stickers being made to that effect?  If so my girls would like some  :|||:

Taken out of context ... um.   :|bl
Title: Re: hohner pokework d/g chinese construction
Post by: rees on March 31, 2015, 09:15:49 PM
BTW some of those 70s plywood cheapies (EKO etc) are fetching decent money and are well made by todays standard .

EKO guitars were made in Recanati, Italy, the home town of Castagnari.

The old EKO factory is now a series of units including a car-wash and a very good restaurant.
SimplePortal 2.3.5 © 2008-2012, SimplePortal