Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: LDbosca on September 08, 2010, 11:54:30 PM

Title: Hohner Compadre B/C/C#
Post by: LDbosca on September 08, 2010, 11:54:30 PM
Hi all,

I know there's been a few threads on these boxes, I wasn't sure whether to add to one or start one but I went with starting a new one in the end.

I know there's a B/C/C# Compadre available and I've taken a notion (one that I might never follow up, be forewarned!) that I could get one for the purposes of learning jazz. I have a B/C Erica and I was thinking I could either use that to correct the accidentals included on the first button of each row by Hohner and use the B/C/C# or else use rearrange the reeds (and use the Erica reeds) to give a Pignol/Milleret layout that would be fully chromatic on the pull.

So, I need to know if Erica reeds will fit in the Compadre's blocks and if rearranging reeds to a different layout is feasible.

Also, any feedback about the instrument's playability would be great. I know I can't expect too much for the price but I am very used to high-end boxes so I suppose it's a consideration.

Thanks,
Luke.
Title: Re: Hohner Compadre B/C/C#
Post by: acctech on September 18, 2010, 01:51:20 AM
Yes, the reed plates from an Erica will fit on compadres blocks. You may have to shim or remove material from the reed block as neccesary to adjust for height. If you live in the states reed plates are available directly from Hohners service dept. Most reeds are in stock.
SimplePortal 2.3.5 © 2008-2012, SimplePortal