Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Malcolm Austen on September 10, 2010, 08:59:56 PM

Title: Pitch Pine
Post by: Malcolm Austen on September 10, 2010, 08:59:56 PM
I have the chance of some very nice straight grained 100 year old pitch pine, it looks good but is it any good for making melodeons from. Has anybody any experience of using this wood?
Title: Re: Pitch Pine
Post by: Broadland Boy on September 10, 2010, 10:31:29 PM
Grab it with both hands Malcolm, it doesn't come much better seasoned than that and pitch pine beats the pants off modern pine - as to making melodeons from it I don't know, but it is good for organ pipes if that helps and it will be stable, not as porous as ordinary pine so should be quite resonant, takes glue, screws and finishes well.

If its ex church or chapel Pews it will have been well fed  ;)

Richard
Title: Re: Pitch Pine
Post by: Graham W on September 10, 2010, 10:44:40 PM
I've a great stack of the stuff from the floors of a Victorian hotel that was being demolished near us.   I imagine it would be ideal - it's extremely stable,  and comes up with a beautiful finish. It' ll be extremely dry and can give you vicious splinters if you're not careful. It's perhaps not the nicest wood to work with hand tools but machines beautifully.

If it's old floorboards it's worth putting some effort into removing the waxed surface before machining it. 100+ years of floor polish impregnated with grit and dust wreaks havoc with planer blades very rapidly.
Title: Re: Pitch Pine
Post by: rees on September 10, 2010, 11:39:48 PM
If either of you have any spare, I'd love a lump of that.
Title: Re: Pitch Pine
Post by: oggiesnr on September 11, 2010, 11:50:29 PM
If you're machining it wear old clothes (and of course a mask), the dust stinks of pitch (of course).  Other than that it's a lovely wood.

Steve (who helped turn a chapel's worth of pews into a kitchen)
Title: Re: Pitch Pine
Post by: Jeremy Burnett on September 12, 2010, 09:29:21 AM
The best boat planking timber you can get! Can be a bit resinous on a plane.
Title: Re: Pitch Pine
Post by: Graham W on September 12, 2010, 01:20:48 PM
If either of you have any spare, I'd love a lump of that.
No problem - I've emailed you,

Graham
Title: Re: Pitch Pine
Post by: Broadland Boy on September 12, 2010, 06:39:33 PM
If either of you have any spare, I'd love a lump of that.
No problem - I've emailed you,

Graham

Hmmmn, Wesson 'Phoenix', the only self igniting one row box made  ;D   
1/32" thick reedbeds in mind Rees or something entirely unrelated ? I cut some 'veneer' about that thickness for street organ pipes from a bit of old wherry mast and the bandsaw blade got loaded with pitch and dragged badly, was introduced to Axminsters aerosol ptfe loaded anti stick stuff and after a clean down and lube job was fine.

Richard
Title: Re: Pitch Pine
Post by: melodeon on September 13, 2010, 11:55:38 PM
For the unenlightened Murricans

what is "pitch pine"

Here pitch pine is used as a fire starter...

must be different
Title: Re: Pitch Pine
Post by: Graham Spencer on September 14, 2010, 06:18:53 AM
At the risk of being a timber nerd, I think what you in the USA call pitch pine is pinus rigida, which yields timber of little use other than for pulping or firewood; what we in UK call pitch pine is pinus caribea, which generally comes from Central America and produces a hardwearing, stable softwood much used in Victorian joinery - especially staircases, doors and chapel pews.

Graham
Title: Re: Pitch Pine
Post by: Jeremy Burnett on September 14, 2010, 10:49:30 AM
The boat building timber was (is) Pensacola pitch pine from southern USA.All cut now, long leaf yellow pine is some times used .Nearest European wood is Larch.
Title: Re: Pitch Pine
Post by: melodeon on September 14, 2010, 02:51:31 PM

I saw this in Belize


http://www.conifers.org/pi/pin/caribaea.htm


As to pinus rigida found in the east....not the same as what we havein the west .

Our pitch pine is  not rigida... I'll find out what it is...


JJH   former wood hustler.. specializing in wood for instrument makers...(in a previous life)

Title: Re: Pitch Pine
Post by: Andrew Culwell on September 14, 2010, 05:05:41 PM
Is this similar to what we in the southern US call Heart Pine?  I believe it is.  My 85 year old farm house has Heart Pine floors and they are beautiful if a little knotty.  I think the stuff is gorgeous!  Have no idea about it's use for melodeons. It's prized down here for flooring and can hardly be found anymore aside from salvage from old homes. Check out this link.

http://www.appalachianwoods.com/Heart-Pine-History.htm
Title: Re: Pitch Pine
Post by: Chris Ryall on September 14, 2010, 05:35:55 PM
I've always associated pitch pine with being told to 'go and strip that Victorian door' on buying herself a new house.  

AFAIK heartwood is from the middle of the tree, and should therefore have circles when you look at the end of the plank. This was supposed to make it stronger and it got a better price. Incidentally the log cabin style kit sauna I constricted last year has these circles, and is solid as a rock. It's described as 'solid log' but the 'logs' are actually square section, planed all round. The wood itself is quite soft when you screw into it.  Great for larger construction, but not sure how it might do chiselling.

Yup, sauna time  8)  "the livin' is easy"  ... [edit] bugger! the timer failed. he ho
Title: Re: Pitch Pine
Post by: Graham Spencer on September 14, 2010, 05:55:04 PM
AFAIK heartwood is from the middle of the tree, and should therefore have circles when you look at the end of the plank. 

Well ( Thread Drift Warning!!), that depends on whether it was quarter-sawn or through-and-through sawn. Quarter-sawn timber is always more stable - and more expensive - than t-&-t, and always to be preferred for tonewoods for any instrument.  As is winter-felled (when the sap is down), slow grown (and therefore closer-grained) timber. Sorry - in another life I make violins......... (:)

Graham
SimplePortal 2.3.5 © 2008-2012, SimplePortal