Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: WestOz on October 22, 2010, 08:44:48 AM

Title: Wanted - Grill for Preciosa
Post by: WestOz on October 22, 2010, 08:44:48 AM
Does anyone out there have such a grill? Or a viable alternative?
Any help appreciated. Westoz
Title: Re: Wanted - Grill for Preciosa
Post by: Theo on October 22, 2010, 08:47:40 AM
I have adapted the grill for a Hohner four-stop to fit a Liliput.  It has the same pattern of piercing as the early Liliput.   Might work for a Preciosa too.
Title: Re: Wanted - Grill for Preciosa
Post by: WestOz on October 22, 2010, 08:59:39 AM
Thanks Theo - I don't suppose you have the dimensions of a 4-stop grill, in particular the overall width of the stamped-out pattern? I suspect the issue will be that the solid border would all get cut off, due to diminutive size of the Preciosa.
Title: Re: Wanted - Grill for Preciosa
Post by: Theo on October 22, 2010, 09:19:16 AM
Yes you would loose the border.  The Preciosa grill is 203 wide, the width inside the border on the 114 grill is 208.

If you wanted to attempt some fancy hard soldering then you might be able to trim a piece out of the pierced area.
SimplePortal 2.3.5 © 2008-2012, SimplePortal