Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: stevejay on November 21, 2010, 02:40:15 PM

Title: Bad higher F on a GC
Post by: stevejay on November 21, 2010, 02:40:15 PM
http://forum.melodeon.net/files/site/GC21acc.gif

g/C melodeon, accidentals

It's the higher F on the pull treble side that isn't sounding right. Where is it on the reed block again, before I poke around on reeds which sound ok? Finally came back from a service, very disappointing.
Sounds like a reed may not be starting correctly, or possibly out of tune.

If there is a reed block 2 row  sticky, that would be useful. Embarrassed I need to ask this.
Thanks!

Title: Re: Bad higher F on a GC
Post by: Lester on November 21, 2010, 02:48:05 PM
What make/model, they are not all the same inside  ;)

But as it's a pull reed it will be difficult to see as it will be on the inside of the block under its valve  :(
Title: Re: Bad higher F on a GC
Post by: Theo on November 21, 2010, 02:57:47 PM
If it is a two voice box, with the layout you have linked to it will be the third pair of reeplates from the top on the shorter of the two treble blocks,  and like Lester says - under the valves.  It could be either of the pair of F reeds.
Title: Re: Bad higher F on a GC
Post by: stevejay on November 21, 2010, 03:50:33 PM
Thanks. I'll probably try some compressed air and gentle prodding with a toothpick. Probably live with it until I have the heart to send it out again. It took me a good long time the first time out.
Title: Re: Bad higher F on a GC
Post by: Lester on November 21, 2010, 04:17:43 PM
You pay my travel and I'll come and look at it for you  ;D
SimplePortal 2.3.5 © 2008-2012, SimplePortal