Melodeon.net Forums
Discussions => Teaching and Learning => Topic started by: oggiesnr on November 24, 2010, 10:27:28 PM
-
My new box is LMM and has low notes in G (especially the lower E) so most tunes I can play either at the low end or an octave higher without it sreamming as on a D/G. Is there any generally accepted convention for which octave you play in?
Steve
-
Good Question. I'm in the same boat.
In general, G/C boxes get played at the high notes end of the keyboard much more than D/G. If you're used to playing on a D/G the fingering's different in the higher octave of course, but that's just something you have to learn. They are nice for playing in A minor (:)
I think the answer is whatever sounds best, and that depends on the sound of your particular box, both treble and bass, and the range of the tune.
-
Nothing more mellow than playing low on the G row. Blends with the basses, which is also a nice sound.
-
Is there any generally accepted convention for which octave you play in?
I've bought two tutorials (Yann Dour and Alain Pennec) for playing the G/C accordion and both are about to play in the higher octave on the G row and lower octave on the C row.
I highly recommend the Yann Dour tutor book, excellent method and and a selection of tunes that are fun to play.
-
I've bought two tutorials (Yann Dour and Alain Pennec) for playing the G/C accordion and both are about to play in the higher octave on the G row and lower octave on the C row.
Many French tunes go from G to G or A around the middle of the C row, because that is the range of bagpipes with a G drone and G/C vielles à roux. That would suggest higher octave on the G row and right in the middle of the C row.
-
Like Florence Pindivik's "Miz Kerzu"?
-
Nothing more mellow than playing low on the G row. Blends with the basses, which is also a nice sound.
Although the tutorials and tabs teach playing in the top octave, it does seem a shame not to use the bottom octave because it has such a lovely rich tone. I like to play tunes on my G/C using the same fingering as on a D/G because they just sound nice. A lot of tunes sound good if you play them in one octave then the other - it's also good practice at playing fluently in both octaves.
-
I'm a G/C player
Tunes in Am, C and G are played in upper octaves,
Em starts usually on the E below the middle C, Ddor starts also low quite often.
Just have a look at the vast number of C/G tablatures:
http://www.diatonia.net/
http://diato.tripod.com/tablat.htm
http://www.diatojo.com/tablatures/ (click on the dancers)
http://www.diatofiddle.com/
http://eric.vales.free.fr/PagesHtml/Musique/index.htm
http://www.diato-cours.net/somtablat/index.html
http://www.grainselsol.org/sol_tablatures_accordeon_diatonique.htm
http://diato-amateurs.pagesperso-orange.fr/tablates.htm
-
One of the joys of G/C playing is that you can find music which ranges over the whole of the instrument. Some composers like Stephan Delicq seem to really enjoy the rich tone of the bottom end. Most traditional music will take up to the top end. My knowledge of the fingerboard has dramatically improved since I focused on G/C as my standard box.
-
Thanks michik - that list of links is a useful resource.
-
thanks michik--some of these site I had not heard of. plus some nice tunes. seldom seen modern, "pop" tunes. now I have to get tabledit.
-
Thanks michik - that list of links is a useful resource.
Likewise, many thanks
Steve