Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Lester on December 01, 2010, 11:23:12 AM

Title: 1140 casework
Post by: Lester on December 01, 2010, 11:23:12 AM
I am refurbing a 1140 I got for no money off eBay. It plays really nicely but looks tired.

(http://homepage.ntlworld.com/goldfrog/melodeon/1140.JPG) (http://homepage.ntlworld.com/goldfrog/melodeon/1140.JPG)

My options appear to be:

1)  Live with it
2)  Sand off pokerwork and varnish
2)  Sand off pokerwork and spray

Any views/advice gratefully received  (:)
Title: Re: 1140 casework
Post by: Steve_freereeder on December 01, 2010, 11:38:09 AM
As these instruments are not particularly rare or precious, I would have few, if any, qualms about sanding and refinishing the casework in some funky colour or colour combination. Deep purple with orange lightning flashes or flames perhaps?
Title: Re: 1140 casework
Post by: Rob2Hook on December 01, 2010, 11:39:14 AM
Sue turned up at the Bunkfest one time with her tatty Pokerwork stripped and sprayed Wedgewood blue, with white mouldings attached - very up-market!

Rob.
Title: Re: 1140 casework
Post by: Theo on December 01, 2010, 11:53:48 AM
Keep it as it is, its beautiful.
Title: Re: 1140 casework
Post by: Owen Woods on December 01, 2010, 11:54:03 AM
I'm living with it, a battered case gives character and street-cred :P Plus since this is probably going to be a "looks a bit grey" morris box eventually I'm not too concerned with prettying it up.
Title: Re: 1140 casework
Post by: Quebecois on December 01, 2010, 03:03:30 PM
Fix everything except the case finish! A good-sounding old-looking accordion has character...
Title: Re: 1140 casework
Post by: HallelujahAl on December 01, 2010, 03:34:49 PM
'Tis a thing of beauty already - leave it alone would be my suggestion. Alternatively I would say sand and varnish, though I'm not sure the wood underneath is necessarily any more attractive.
Title: Re: 1140 casework
Post by: Graham Spencer on December 01, 2010, 03:51:27 PM
I've got one of those awaiting work as well - been wondering the same thing. On the whole I think I'm inclined to keep the casework as is provided I can get it sounding OK. The bellows seem sound, but a number of reeds have dropped out (they'e all still present!) and a couple of pallets have become detached - nothing unfixable.  The mechanics seem OK. I think I paid a tenner for mine on a car boot stall - it's been sitting on a shelf for a few years now. 

On the other hand, a sparkly metallic electric blue finish has a certain appeal - maybe with an onboard radio mic system...........and an LED lightshow........

Graham
Title: Re: 1140 casework
Post by: Theo on December 01, 2010, 04:12:49 PM

On the other hand, a sparkly metallic electric blue finish has a certain appeal - maybe with an onboard radio mic system...........and an LED lightshow........


Like this? (http://www.flickr.com/photos/7323610@N04/419741383/)
Title: Re: 1140 casework
Post by: Lester on December 01, 2010, 04:14:29 PM

On the other hand, a sparkly metallic electric blue finish has a certain appeal - maybe with an onboard radio mic system...........and an LED lightshow........


Like this? (http://www.flickr.com/photos/7323610@N04/419741383/)

Noooooooooooooooo!
Title: Re: 1140 casework
Post by: Rob2Hook on December 01, 2010, 04:38:32 PM
Oh - don't be such a killjoy  ;D !

Must suggest something similar to our local ladies' border team (all neon colours and fishnets).

Rob.
Title: Re: 1140 casework
Post by: Christopher K. on December 01, 2010, 05:23:28 PM
My vote is for all black -- black case, black pallets, black pearl buttons, black straps. Keep the grille silver. The Johnny Cash Model.
Title: Re: 1140 casework
Post by: Rob2Hook on December 01, 2010, 05:43:54 PM
There was a flashy racing boat went past my mooring the other day.  It was an irridescent finish so you couldn't tell whether it was black, green, pink or purple!  Now there's a finish for you!  Anyone know where to get such paint or do only the custom bikers' shops do this?

Rob.
Title: Re: 1140 casework
Post by: juker on December 01, 2010, 05:48:12 PM

On the other hand, a sparkly metallic electric blue finish has a certain appeal - maybe with an onboard radio mic system...........and an LED lightshow........


Like this? (http://www.flickr.com/photos/7323610@N04/419741383/)

The plastic tubing could be a little over the top  ;)
Title: Re: 1140 casework
Post by: acctech on December 01, 2010, 06:28:28 PM
If you do want to re-finish it with a painted color. After sanding the body down, mask off anything you don't want finished, seal the wood with a good 2 coats of Vinyl Sealer. It's a commercial grade sealer that works excellent. Then sand it smooth with 320 Grit before putting your top coats on. If you don't seal the wood first it may keep on absorbing the finish requiring many more coats than is necessary.
Title: Re: 1140 casework
Post by: Graham Spencer on December 01, 2010, 07:50:11 PM
My vote is for all black -- black case, black pallets, black pearl buttons, black straps. Keep the grille silver. The Johnny Cash Model.

Or maybe the Hotblack Desiato Special........

Or the Spinal Tap "How Much More Black Could It Be" model.........

Where would I incorporate the Ring of Fire? ;D
Title: Re: 1140 casework
Post by: Accordion Dave on December 02, 2010, 01:23:19 AM
You could touch up missing gold inlay with a gold colored "Crayola" crayon. Rub the crayon into the grooves and polish the humps.

Title: Re: 1140 casework
Post by: melodeon on December 02, 2010, 01:53:24 AM
LEAVE IT !

There is a certain beauty in something that is well worn

Any attempt at a refurb or sand and respray would in my opnion destroy the box.

There is a term  I believe coined  by a fellow named Grant who owns Rivendell Bicycles..
this was referring to older classic Italian, French and British bicycles

the term is  BEAUSAGE   pronounced   byoosuj

It refers to the look and grace of aging by use...a bit more than patina.. as it implies a human element to how the
article got to where it is.. It is a respect for the history of it all......which would include and repars along the road and or replaced bits..
given that they were appropriate...

Leave it alone.


Title: Re: 1140 casework
Post by: malcolmbebb on December 02, 2010, 12:54:39 PM
I found a good clean with detergent and a light clean with Brasso *(available at Tesco but more than three ha'pence these days) made a huge difference. Although the gold is worn, it removed that "tired" look.

Try it - you can still get the angle grinder on it if you remain unimpressed.

The Brasso bit has to be very gentle because it quickly starts to remove the gold. However, it brought the black up to a high gloss quite nicely especially on the bass plate - which nobody sees anyway :-)

The gold looks much nicer than the modern gold finish.

PS I used Solvol Autosol to clean the grille, with backing fabric still in place. The fabric was tatty anyway. The grille went from sad to liveable, needs a bit more but it can wait now. Then I gave it a good wash with soapy water which got the (by now, black) polish out of the fabric, dried as best I could on a towel and put it (= hid it :-) in the airing cupboard for a day or two. The fabric did suffer but it's tolerable.
Title: Re: 1140 casework
Post by: Ebor_fiddler on December 02, 2010, 09:24:51 PM
I've just got some flashing LEDs from a Pound Shop for my fiddle decoration while playing Carols on Christmas Eve. I may also try them on my box for the festive period.  ;D They take three AAs and last for 24 hours (but Daddy, I can't play for as long as that!)  :||:
Title: Re: 1140 casework
Post by: melodeon on December 03, 2010, 01:53:43 AM
Solvol Autosol.... used that in the 60's and 70's on my bicycles
Haven't seen it for years... the best polish ever....
Title: Re: 1140 casework
Post by: Malcolm Clapp on December 03, 2010, 02:10:10 AM
... Pound Shop ....

Off topic, but interesting term.

In Oz, that's a charity shop raising money for the RSPCA.   

More likely, I suppose it's like our Two Dollar Shop, colloquilay referred to here as "The Shop o' S**t".   >:E

Hope the LEDs last longer than most items I've bought in such emporiums emporia....

Title: Re: 1140 casework
Post by: Lester on December 03, 2010, 07:51:27 AM
Solvol Autosol.... used that in the 60's and 70's on my bicycles
Haven't seen it for years... the best polish ever....

It is what I use for cleaning up casework, nice gentle abrasive but does remove all kinds of crap :)
Title: Re: 1140 casework
Post by: Bill Young on December 03, 2010, 10:49:32 AM
Solvol Autosol.... used that in the 60's and 70's on my bicycles
Haven't seen it for years... the best polish ever....

It's readily available in Halfords.
Title: Re: 1140 casework
Post by: Rob2Hook on December 03, 2010, 03:11:55 PM
It's readily available in Halfords.

You must have a better branch of Halfords, then!

Rob.
Title: Re: 1140 casework
Post by: Bill Young on December 03, 2010, 04:18:14 PM
It's readily available in Halfords.

You must have a better branch of Halfords, then!

Several not too far away, including a super-sized one at Braehead, Glasgow. But if all else fails . . . (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_176475_categoryId_165527_langId_-1?cm_sp=Intelligent_Offer-_-Product_List_Zone_1-_-Blank&iozone=PLPz1) You can check stock at any branch using the website. Every one within a 25 mile radius of here has it.
Title: Re: 1140 casework
Post by: Ebor_fiddler on December 04, 2010, 11:34:18 PM
Solvol Autosol - Have you tried motorbike shops?  :-*
Title: Re: 1140 casework
Post by: DonnieFleming on August 09, 2013, 10:52:52 AM
I've got one of those awaiting work as well - been wondering the same thing. On the whole I think I'm inclined to keep the casework as is provided I can get it sounding OK. The bellows seem sound, but a number of reeds have dropped out (they'e all still present!) and a couple of pallets have become detached - nothing unfixable.  The mechanics seem OK. I think I paid a tenner for mine on a car boot stall - it's been sitting on a shelf for a few years now. 

On the other hand, a sparkly metallic electric blue finish has a certain appeal - maybe with an onboard radio mic system...........and an led lighting (http://www.niceledlights.com)........

Graham

hello friend from where I can get similar casework? I have been searching for a while so please can you help me..
SimplePortal 2.3.5 © 2008-2012, SimplePortal