Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: malcolmbebb on December 10, 2010, 10:26:01 PM

Title: Noisy valve on an Erica
Post by: malcolmbebb on December 10, 2010, 10:26:01 PM
The valve on the D (second button down) on the G row makes an audible click when I begin to play the note. It's a German box with plastic valves.

The F# was only sounding one reed. Took the block off, couldn't see wrong anything except the valve sitting a little high. Pinged the reed a few times from the inside and it began to work. The F# now sounds fine, but it's pretty certain that's the valve that's clicking.

The click isn't deafening but irritating. Is there anything I can do apart from replacing the valve? 

Probably didn't notice before, if the reed wasn't moving maybe the valve had an easy life. I haven't had the box long and didn't notice the problem when I bought it.
Title: Re: Noisy valve on an Erica
Post by: diatonix on December 11, 2010, 06:23:15 AM
If you don't have easy access to a replacement valve, you could try by carefully bending the upper (spring-)flap until the one(s) below lie(s) flat on the plate. I prefer using my tuning tools to do this. It won't help, though, if it's a glue problem (which is often the case with older Hohner boxes: quite frequently it's only the wax behind the rivet that keeps the valve from falling off...), but if that were the case you'd probably have issues with quite a few other reeds as well.
SimplePortal 2.3.5 © 2008-2012, SimplePortal