Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: rees on December 13, 2010, 11:26:56 PM
-
Several new additions on my website: www.melodeons.com (http://www.melodeons.com)
Castagnari Casta D/G. Cherry.
Beltuna Sara 2 D/G. Burr walnut or cherry.
Junior Martin Cajun in C with internal mic. Binci reeds. Pear wood.
-
What's with the finish on the Martin and TAM not a mano reeds ?
I have lots of pear wood... that doesn;t look like any pear I have used
Essentially pear comes 2 ways... natural and steamed....
Steamed changes the color but stabilizes it..... gets brownish grey
In its natural state it is pinker ( is that a word ? )
I would buy a Martin over a Savoy any day....
you are fortunate to have one "over there".
If the Casta was anything but a D/G I would be interested....
Spruce sound board... luckily...
I believe they also used some cedar which is more prone to cracking and splitting
-
The Beltuna Sara in Burr walnut is truly gorgeous. Someone will be very happy with it. They're very nice to play.
-
Is burr different from burl or is that a typo?
-
Is burr different from burl or is that a typo?
AFAIK, what we in the UK refer to as "burr" is called "burl" in the US.
-
I would buy a Martin over a Savoy any day....
you are fortunate to have one "over there".
But, but ....... butt ?
-
Several new additions on my website: www.melodeons.com (http://www.melodeons.com)
Junior Martin Cajun in C with internal mic. Binci reeds. Pear wood.
Rees - your description of the Jr Martin says "Four voice treble". Does this mean that it is tuned MMMM, not the usual LMMH ?
Confused of Sheffield
-
Sorry, mr confused of scunthorpe (now who's confused? :D)
No it's a normal 4 voice LMMH.
@jeff. i think it's pear wood. The one I made on the EATMT course with Emmanuel P was pear wood and roughly the same colour.
-
Pear wood is not commonly used in the states except by violin makers and a few
yuppie wanna be Krenov wood workers.
In the 20's, 30,s and 40's it was used on the face of head stocks on guitars banjos and mandolins and dyed black.
Also dyed and used as fingerboards on chead stringed instruments.
Jeff Hildreth
Retired Jr. Exec. Piggie from the Auto industry ( including a 4 year stint with an official BMC/Jag Rolls dealer, and many exhalted positions with highline Euro auto makers)
Former kayak designer/builder
Former surfboard maker
Former exotic wood hustler specializing in Pernamuco for violin bows
Former violin hustler
Founder of the Monterey Bay European Motorcycle Club
Designer of the Martin CEO 5 guitar (in spite of info to the contrary)
Maker of historically based painted Furniture
Folk Artiste/ Painter of Fishes
Signmaker ( over 7000 to date )
Amateur instrument maker since 1964
-
Painter of Fishes
Hey Jeff, over here the Environment Agency get very upset by this, you can't even creosote or oil them now ;D ;D
Quite a resume ! Are your finishes those which use egg as a binder rather than oils ?
One of the traditional uses for Pear wood over here, along with Apple and Hornbeam, is for the cogs in gearwheels in mills and the like, pretty certain this was unsteamed and while not greatly insect resistant was very wear resistant and just the right toughness to break in an emergency.
Richard
-
Looks more like American cherry to me, distinctly different from the European cherry we're used to, although I'm not absolutely sure.
I'm making a guitar with pear back and sides at the moment, 'tis lovely stuff.
-
Pear wood is not commonly used in the states except by violin makers and a few
yuppie wanna be Krenov wood workers.
And don't forget another traditional use of pear:
http://www.wenzloffandsons.com/component/virtuemart/harvey-peace/small-tenon/harvey-peace-small-tenon-saw-cross-cut.html
Apparently your "neighbor," Jeff!
-Andy
-
Looks more like American cherry to me, distinctly different from the European cherry we're used to, although I'm not absolutely sure.
It's funny how some things get grouped together just by crossing the ocean. Here in Vermont, we consider our local cherry to look (and work) very differently than the (much more desirable) cherry from PA and NY.
And yet, if walnut comes to use from anywhere from France to Rumania, we tend to call it "European" walnut, despite the fact that French walnut and Rumanian walnut look different.
Even within a species, differences in climate can affect the way the wood looks and works.
I really love the appearance of the burr/burl Walnut of that Beltuna -- would love to hear that box, too!
-Andy, never having seen or heard a Beltuna (or a "Wesson" for that matter) in the wild here in New England...
-
Andy, about 4 1/2 hrs north...
yup a neighbor.
I think I'll arrange a visit on my next trip to Portland.
-
Well if you're in Portland, drop in for a tune and a cup of tea.