Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Judd on December 22, 2010, 10:39:33 AM

Title: how much tuning margin on typical reed?
Post by: Judd on December 22, 2010, 10:39:33 AM
How much tuning margin does the typical reed have, in Hz below and above the equal temper reference frequency?

In other words, if I order an Italian box with a certain tuning set-up, how much can that be adjusted at a later date?

Ferinstance I get one set of M reeds tuned 2.5 Hz above reference frequency and decide later I want to reduce it to 1.5 Hz above.

Thoughts? Is it quite different between durall, TAM reeds, etc.?

thanks-
Title: Re: how much tuning margin on typical reed?
Post by: Anahata on December 22, 2010, 11:11:41 AM
Reeds can often be tuned up or down at least a semitone, so no problem if you think you might just want to make a few cents change for tremolo wetness adjustment.
Title: Re: how much tuning margin on typical reed?
Post by: Chris Ryall on December 22, 2010, 08:15:41 PM
I've (or rather Music Shop's Paul has) tuned 5 reeds be a semitone and they are fine. Was told a whole tone was pushing it and might lead to it snapping later. I assume tuning up (file tip) is safer than down (file base) in this regard?
SimplePortal 2.3.5 © 2008-2012, SimplePortal