Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Gromit on December 22, 2010, 11:42:56 AM

Title: Clacking Salterelle Boube
Post by: Gromit on December 22, 2010, 11:42:56 AM
I'm getting "clacking" sound as I play my Salterelle Boube is this something I can fix myself?

Thanks

John
Title: Re: Clacking Salterelle Boube
Post by: Lester on December 22, 2010, 11:45:03 AM
Where does the clacking come from the Treble Mechanism or the Bass Action or else where?
Title: Re: Clacking Salterelle Boube
Post by: Gromit on December 22, 2010, 06:16:49 PM
It's on the treble side
it's mainly when I release the button
it's not so much a clacking more a slapping sound and more pronounced on the inside row
it's not as loud as some Hohners that I've heard




Title: Re: Clacking Salterelle Boube
Post by: LDbosca on December 23, 2010, 07:34:32 PM
Has it developed over time? I have something similar with the outside row of my Boube, in my case it was because the mechanism of mine operates a row of pallets that are suspended and operated by little bars that fit into them, one of the bars became bent wasn't sitting where it should, clicking when it was played. (I know that's hard to picture without seeing)

Take the cover off and have a look and see if you can see something like this causing it anyway.
Title: Re: Clacking Salterelle Boube
Post by: Steve_freereeder on December 24, 2010, 07:43:29 AM
It's on the treble side
it's mainly when I release the button
it's not so much a clacking more a slapping sound and more pronounced on the inside row
it's not as loud as some Hohners that I've heard
If it is a 'slapping' sound, it could be that the facing material on the pallets (usually a laminate of felt and soft leather) has become compressed and less resilient over the years. This would result in more noise when the pallets impact the toneholes board/fondo when the buttons are released.

You can buy replacement pallet facing material from Charlie Marshall HERE (http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html).
It's a bit fiddly to fit - you need to disassemble the RH action and remove the old facing material, but it will probably make a big difference in the reduction of pallet noise.
Title: Re: Clacking Salterelle Boube
Post by: Stiamh on December 24, 2010, 06:12:03 PM
Has it developed over time? I have something similar with the outside row of my Boube, in my case it was because the mechanism of mine operates a row of pallets that are suspended and operated by little bars that fit into them, one of the bars became bent wasn't sitting where it should, clicking when it was played. (I know that's hard to picture without seeing)

Yeah but yours is an "Irish" Bouëbe. If the OP's machine is an ordinary Bouëbe, it won't have that style of lever mechanism.
Title: Re: Clacking Salterelle Boube
Post by: LDbosca on December 25, 2010, 12:19:35 AM
Oops!
Title: Re: Clacking Salterelle Boube
Post by: Gromit on December 25, 2010, 11:11:36 AM
Thanks for the info.

Yes it's an "Irish" B/C Boube, I took the cover off and couldn't see an easy way to remove the mechanism - it all looked very fiddly. Can anyone recommend a good repairer/tuner who is familiar with the Salterelle Boube? I'm in London.

John
SimplePortal 2.3.5 © 2008-2012, SimplePortal