Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: dooce on December 30, 2010, 06:26:51 PM

Title: Newbie with 19-button C/F
Post by: dooce on December 30, 2010, 06:26:51 PM
Hi. This is my first post. It must have been something I said at that Bellowhead concert, but Father Christmas delivered a somewhat unloved s/h melodeon into my stocking last Saturday. I'm a sax and flute player so this mysterious little squeeze-box is very intriguing to me. I've worked out roughly what it's about, but it is absolutely unmarked - no clues about manufacturer, age or anything else.

Main problem is that I have 3 persistently sticking keys on the F buttons, and one very feeble reed on the C run, and I cannot see how on earth I get into the thing to fix it without taking a chisel to it. The front plastic panel comes off OK but the hinges etc are all hidden away up inside the projecting keyboard bit which appears to have no way in. Obviously it has been repaired before as the reinforcements on the bellows are not all uniform, and several of the buttons are obviously more recent than others.

The point is though, is it worth spending money on? OK it makes a lovely noise and sounds well in tune, but if fixing it up is going to cost me more than it's worth, I would be better off saving up for something that is better sorted to start with.

I would be very grateful for your opinions and knowledge.

Thanks

Bill


http://www.flickr.com/photos/13898445@N02/5306702509/ (http://www.flickr.com/photos/13898445@N02/5306702509/)
http://www.flickr.com/photos/13898445@N02/5307293182/in/photostream/ (http://www.flickr.com/photos/13898445@N02/5307293182/in/photostream/)
http://www.flickr.com/photos/13898445@N02/5307290828/in/photostream/ (http://www.flickr.com/photos/13898445@N02/5307290828/in/photostream/)
Title: Re: Newbie with 19-button C/F
Post by: Lester on December 30, 2010, 06:33:52 PM
Might well be worth fixing up as a starter box, loads of threads on the site should help you out. Where are you based as someone nearby may be able to help.
Title: Re: Newbie with 19-button C/F
Post by: michik on December 30, 2010, 07:58:54 PM
No, it's not worth to spend money on ...  maybe only to train your accordeon repair skills.
Looks like a low cost melodon from the German Democratic Republic .. it's 40-50 years old.

It's better to invest the money into a second-hand Hohner Pokerwork.
Title: Re: Newbie with 19-button C/F
Post by: Steve_freereeder on December 30, 2010, 08:40:12 PM
This actually may well be quite a good box to get started on, and it may not cost too much to be put into reasonably good playing order. As Lester has hinted, there is quite a lot of advice already on this forum, but you may need to search for it.

To get access to the reed blocks, you need to remove the bellows pins, ringed in red on the attached photo. There are 4 pins on each end. They are like nails with a flanged head. To remove them, use a pair of pliers and pull them out with a straight firm pull at right-angles to the body of the instrument. Use a scrap of cloth or chamois leather to protect the instrument body from scratches from the pliers. Make sure you keep the pins in order so that you can put them back into their original holes on reassembly.

Once the pins are removed, the end of the instrument can be gently eased away from the bellows frame and you will be able to see inside to the reed blocks. When you've got that far, ask again and/or take some more photos of the reed blocks. 
Title: Re: Newbie with 19-button C/F
Post by: dooce on December 31, 2010, 10:53:05 AM
Thanks to you all. I'm in Daventry, Northants since you ask. I will let you know how I get on.
Title: Re: Newbie with 19-button C/F
Post by: Steve_freereeder on December 31, 2010, 11:23:08 AM
Thanks to you all. I'm in Daventry, Northants since you ask. I will let you know how I get on.
At least two people in your area come to mind who may be able to help and advise....

1. Pete Grassby, 2nd-hand melodeon dealer/repairer who lives in Coventry
http://www.actionability.co.uk/PG/
Website is sparse, but it has his contact details on it.

2. Dave Jolly (dealer/repairer/tuner), who is in Northampton.
http://www.jollybox.co.uk/
Title: Re: Newbie with 19-button C/F
Post by: Theo on December 31, 2010, 11:31:15 AM
I'm of the same opinion as Michik on this.   The GDR built boxes have very poorly designed treble keyboards, sticking keys are a frequent problem because of weak or broken springs, and/or distorted wood components.  To fix these you have to withdraw the axle rod which is usually made of flimsy brass wire and is prone to break when you attempt to remove.  If you do get it out without damage then its then very tricky to replace without bending. 
If you can manage to fix it yourself then fine, you will have learned some useful repair skills, but its not worth spending much money on.
Title: Re: Newbie with 19-button C/F
Post by: dooce on December 31, 2010, 12:05:15 PM
Well, I'm sitting here with a part dismantled melodeon thanks to Steves advice to first-time numpties, and yes, as Theo suggests, it looks like the hinge wire is the only way forward. I may be gone some time (gulp).

Once again, thanks to all for your help and expertise.

(Tell you what, these things make saxophones look like aerospace technology  ;D)
Title: Re: Newbie with 19-button C/F
Post by: dooce on December 31, 2010, 12:42:06 PM
WD40. Sorted.

I do appreciate that this is not a recommended repair technique but given the age and value of the instrument, I don't have a lot to lose!
Title: Re: Newbie with 19-button C/F
Post by: ben armatto on December 31, 2010, 03:26:32 PM
Yo dooce,  I don't know if it will help you at all but I have a similar project going on with an old Milano Supertone.  I don't know if it was from the GDR or EDR.  Anyway, I couldn't get the wire out without breaking it and was disconcerted about where to get a new one.  I found that my local Hobby Lobby (big box super hobby store) carries brass rods that coincidentally are the perfect diameter for my Supertone.  So I was able to replace the original.  Don't know if you have a similar store around where you.  It was a little rough re-threading it after replacing a couple springs (that I took off an old piano accordion) but i was able to get it back in through persistence.

So, anyway, good luck with your project and I hope it all works out well for you, Ben
Title: Re: Newbie with 19-button C/F
Post by: dooce on January 01, 2011, 10:25:46 AM
Thanks Ben, but the prospect of spending the weekend doing micro-surgery on an instrument that's probably not worth more than 50 quid sent me down the WD40 route. It's still working! I'll use it while I'm learning (and while it keeps on working) then start looking for something a bit better made and in full working order.......
SimplePortal 2.3.5 © 2008-2012, SimplePortal