Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: tedrick on January 18, 2011, 02:18:13 PM

Title: buzzing/gurgling valves -
Post by: tedrick on January 18, 2011, 02:18:13 PM
Hi Folks -
I have a few noisy valves on the lower half of my Cairdin mini --

would it be ok to replace the valves on the outside of the reed frames first and see if that clears up the issue, or is it preferable to replace the valves both on the outside and inside of the reed -- requiring removing the reed frame from the block and rewaxing --


would it be ok to try a leather valve on the outside and leave the mylar valve on the inside? or would that cause sound problems?


Reed
Title: Re: buzzing/gurgling valves -
Post by: Lester on January 18, 2011, 02:48:12 PM
I would have thought that mixing valve types could give you problems with the speed of the reed sounding. As to just changing outside valves this may prove that the valves are the problem but at some time you will have to bite the bullet so may be worth just doing both sides.

ps Change the valves may well mess with the tuning of the reed :(
Title: Re: buzzing/gurgling valves -
Post by: tedrick on January 18, 2011, 03:09:30 PM
good thing I have a tuner experienced with Cairdins nearby.... will probably need to send it to him....

R
SimplePortal 2.3.5 © 2008-2012, SimplePortal