Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: Harmonicatunes on January 24, 2011, 11:52:16 AM

Title: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 24, 2011, 11:52:16 AM
New member, first post.

I've been playing harmonica for 30 years. A few years back one of my band members gave me a single row Hohner Box in G. I fiddled with it, then set it aside. Fast forward three years I've got it out again, after reading Accordion Crimes. Took it to a festival, showed it to a good player. He pointed out the (obvious) problem, the bass strap was too tight. I've put a new one on, also installed some Hohner shoulder straps as well.

Here it is.

(http://www.harmonicatunes.com/Photos/tony-accordion.jpg)

I can't play it, of course. However it is laid out just like a harmonica, so I have a head start. I play fiddle tunes on harmonica, fairly well, so I know the repertoire. Give me a couple of years, I may get it to work.

Right now I'd like to know a bit more about it. Poking around on the Internet, it seems that I have a Hohner 1040 single row in G. 10 treble buttons, 4 bass buttons. They're not made anymore, by the looks of it. Could anyone tell me when they were made? Was it a common instrument? I've found references to examples in C. Did they make one in D? An obvious key for the repertoire I'd like to play. Hohner do make a Cajun accordion, the 114, in C and D.

Any info much appreciated.
Title: Re: Hohner 1040 Single Row in G
Post by: Martin J on January 24, 2011, 12:06:33 PM
First of all, welcome, I'm sure you will find your answer and more here.

I too was a harmonica player shown a melodeon.  That was thirty odd years ago but I do remember the push / pull mentality came immediately.  This will spark great disagreement, but I think you would enjoy, be more at home, and find it easier to play if you had a two row D/G.  What you have is great but single rows are more difficult to play well than a two row.  Having said that, you will be playing tunes immediately if you just think harmonica on your box.

Pick and tune and play.  You'll love it.  (:) ;)
Title: Re: Hohner 1040 Single Row in G
Post by: Martin J on January 24, 2011, 12:08:07 PM
Just noticed
Quote
give me a couple of years
 No, no, no.  a couple of hours and bet you get there :|||:
Title: Re: Hohner 1040 Single Row in G
Post by: savantuk on January 24, 2011, 02:21:20 PM
Hi,

A beautiful little box.  They are otherwise known as the Pokerwork (Holzbrand - Burned wood in Germany) or 'Vienna' Series.  They were made in Germany from the mid 1950's in this black and gold design, though the box itself in natural wood is much older, from the 1930's. They have decent steel reeds and a nice rich sound.  I believe that Hohner stopped making these around 10 years ago when they transferred the manufacture of the Pokerwork 2 row to China.

They also make a Pokerwork in two row with 8 bass, and various one and two row Pokerworks with stops on the treble end.

It's possible to play most tunes on the 1 row, though the bass is limited.  I have two one row melodeons (including a Pokerwork) myself and love them.  They are very easy to play - exactly the same as a non chromatic mouth organ.

You still occasionally see them for sale new (old stock) for as much as £400, though £300 is realistic, and £200 or so second hand.
Title: Re: Hohner 1040 Single Row in G
Post by: Alison Scott on January 24, 2011, 02:43:11 PM
I can't play it, of course. However it is laid out just like a harmonica, so I have a head start. I play fiddle tunes on harmonica, fairly well, so I know the repertoire. Give me a couple of years, I may get it to work.

Right now I'd like to know a bit more about it. Poking around on the Internet, it seems that I have a Hohner 1040 single row in G. 10 treble buttons, 4 bass buttons. They're not made anymore, by the looks of it. Could anyone tell me when they were made? Was it a common instrument? I've found references to examples in C. Did they make one in D? An obvious key for the repertoire I'd like to play. Hohner do make a Cajun accordion, the 114, in C and D.

I too recommend that you just have a go -- but the one-row in G is a little bit hard to play because it's tuned low so you have to work hard to get enough air over the reeds. Not so much a musical instrument, more a chest expander. As a result, their second-hand value is depressed compared to the same box in other keys; I paid a tad over £100 for mine. Nevertheless, there are lots of great tunes in G and of course you can play D tunes by leaving the odd note out with only a little more work.
Title: Re: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 26, 2011, 02:35:32 AM
Thanks for all this. I can see how to play it, I think. A few hundred hours on the basics and I'll be on my way.

A question

The note layout from buttons 1 and 9 is exactly like a harmonica, and may have been taken from the Richter harmonica tuning developed in the early 19th century. There is a missing note in the bottom scale, a E in the case of my box, which is in G. Harmonica players get this note by "bending", a skill which takes some years to master. For many tunes this note is essential. The box also has two D's in the bottom holes (1 draw, 2 push) these repeated notes provide the I chord on the push, the V chord on the draw.

Some harmonica players tune the blow (push) D up a tone to provide the missing note. This tuning is called Paddy Richter, used by the great Brendan Power amongst others. I also retune my harmonicas, and have devised a tuning called Major Cross. Details at http://www.harmonicatunes.com/retuned

So, my question. Does anyone tune up the #2 push note up a tone on 1 row accordions? It seems an obvious modification, however there may be good reasons not to do it, unknown to a newcomer like myself.
Title: Re: Hohner 1040 Single Row in G
Post by: rees on January 26, 2011, 10:27:14 AM
The usual mod is to tune the draw D on button 1 up to E. This leaves all the Ds on the push and all Es on the draw.
Title: Re: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 27, 2011, 08:31:59 AM
Makes sense.

If it were a harmonica, then I'd tune it up myself. However, this task I'd assign to an accordion professional (we should have some in Australia). Presumably it's a straightforward task?

Also, the bass buttons click loudly when released. The chords on this G box are not loud, the button noise competes with them. Is is possible to put a felt gasket on the underside of the buttons to reduce the click when they are released? Or are these noises part of the deal when you play an older style box?
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on January 27, 2011, 09:08:01 AM
You have discovered the famous Hohner percussion section that come at no extra cost in all their popular boxes.

The noise comes mainly from the pallets closing.  The cure is to reface the pallets with leather on top of felt, instead of just leather.
Title: Re: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 28, 2011, 12:22:41 AM
A final question, then I'll leave you in peace.

When I join a session, I generally use four harmonicas, for tunes in G,D,A,C. Each harmonica is played the same way, these four keys pretty much cover the traditional repertoire (at least, the part that I know). The attraction of the 10 button box is that it's just like a harmonica, only (much) harder to play, at least for me. Presumably the same is done for the one row box, that is, a different one used for each key. We have (one) Cajun box player in Australia, I've seen him change instruments for C and G tunes.

My question - is it feasible to take a one row box with 4 stops (e.g the Hohner 114) and put reeds for different keys for each stop (e.g. G,D,A,C). Or would such a modification be out of the question? Presumably you'd still have basses in one key only.

If you're interested to hear my music (and where these questions come from), check out http://www.harmonicatunes.com/freeharmonicamusic (http://www.harmonicatunes.com/freeharmonicamusic)
Title: Re: Hohner 1040 Single Row in G
Post by: old geezer on January 28, 2011, 07:24:24 AM
hi Harmonicatunes,

welcome to the forum
I've sent you a pm (tool bar under the header "My Messages")

Malcolm where are you ???

not still at Nariel Creek  :|glug  or  :||:   ru?

edit to add
I'll leave you in peace.


no, not here   ;)
Title: Re: Hohner 1040 Single Row in G
Post by: Accordion Dave on January 29, 2011, 01:41:37 AM
I really enjoy playing my 1040s. My first one is in the key of B-Flat. My latest acquisition is in the key of C.
Title: Re: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 29, 2011, 08:03:33 AM
If I can get my head around the Hohner 1040 in G, then I'd be looking for one in D. I'm in Australia, hopefully one will turn up somewhere.

Are there any recording/youtube videos of this instrument being played well? I'd like to hear what it is capable of.
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on January 29, 2011, 10:45:45 AM
I think very few if any were made in D,   certainly c and G are the most numerous by a long way.  You can play some D tines on a G box by playing in second position, but you might want to have the basses modified if you did this a lot.
Title: Re: Hohner 1040 Single Row in G
Post by: Harmonicatunes on January 29, 2011, 11:05:58 AM
Pretty much everything I play is in G or D. Is it feasible to get a Hohner 1040 in C tuned up to D?
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on January 29, 2011, 11:13:56 AM
Yes,  just fit a set of D reeds.   Tuning the C reeds up a whole tone is not a good idea.

My previous point was that on a G box you could play plenty of things in D, you could even put a C# accidental on the first button, similar to the typical setup of a two row.
Title: Re: Hohner 1040 Single Row in G
Post by: malcolmbebb on January 29, 2011, 03:43:07 PM
What's the difference between a 1040 and 1140? (not intended as a joke question!).

I thought the basic one row as pictured was an 1140?
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on January 29, 2011, 03:50:38 PM
I think its a simple mistake, should be 1140, not 1040, at least that is what the Hohner history book indicates.

1140 is mentioned a couple of times in the Hohner spare parts list (http://www.peterunbehauen.de/p/07sparecatalogue.html), but I can't see 1040 in there.
Title: Re: Hohner 1040 Single Row in G
Post by: Accordion Dave on February 01, 2011, 04:14:19 AM
I think my accordions are both model HA-1140. 1040 is a tax form.
Title: Re: Hohner 1040 Single Row in G
Post by: Christopher K. on February 02, 2011, 05:02:47 AM
I think my accordions are both model HA-1140. 1040 is a tax form.

Yes sir, you are correct but the IRS no longer supplies the library with paper tax forms for public use. Instead, the IRS has chosen to supply the library with an equal number of paper pamphlets describing how the public may access and print out their own forms online.  :|glug

Doesn't the Hohner spare parts catalog also refer to the 2915 as a 2815? I've never been quite clear on that, either.
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on February 02, 2011, 08:09:43 AM
More confusion:

The price list from Hohner USA (http://hohnerusa.com/upload/links/l_00000775_Accordio_Parts_List_Retail_2010.pdf) recently posted by blafleur in another thread, refers to the model 1040,  but the price list from Hohner Europe (http://www.hohner.de/ablage/med_00007692_1286269842_Spare%20Parts%20Price%20List%202010%20engl.%20version.pdf) refers to model 1140
Hohner have always been a bit profligate in their use of model designations! ;D
Title: Re: Hohner 1040 Single Row in G
Post by: Matthew B on February 02, 2011, 02:57:10 PM
But there's a brilliant almost-logic to the numbering system.  Two rows, one setting (ie. no registers) eight bass, quint-tuned = 2185.  One row, one setting, four bass, and ah, something else undetermined = 1140.  One row, two settings, two bass = 112.  One row, three settings, two bass = 113.  Hohner Club I, erm, smaller than the Hohner Club II?  235 = not the 234. 

On the other hand, the Italian names . . .
Title: Re: Hohner 1040 Single Row in G
Post by: Theo on February 02, 2011, 03:56:08 PM
But there's a brilliant almost-logic 
Almost-logic, now there's a concept to savour.  Another example:
Club I  two voice
Club II  two voice
Club III three voice (ah there's the logic coming in)
Club IV three voice (oops)

And Hohner model names:
Preciosa - club melodeon  and/or harmonica
Picoletta - club melodeon  and/or piano accordion

Title: Re: Hohner 1040 Single Row in G
Post by: Martin J on February 02, 2011, 04:00:56 PM
What's in a name? that which we call a rose
By any other name would smell as sweet
Title: Re: Hohner 1040 Single Row in G
Post by: Accordion Dave on February 02, 2011, 11:27:06 PM
Oh crap
Title: Re: Hohner 1040 Single Row in G
Post by: acctech on February 03, 2011, 02:51:32 AM
I know that in the states the model designations were different for those two models going back some time. How far I'm not sure, I can do a little digging in our archives and perhaps place a date on when and if there was a switch from Trossingen's model designations and the ones we use here in the states. My best guess is that it was a marketing decision, I doubt it was a mistake. Either way were kind of stuck with it. Regardless a 2915 is the same as a 2815 and the 1140 was the same as a 1040.
SimplePortal 2.3.5 © 2008-2012, SimplePortal