Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: myra on February 07, 2011, 08:01:18 PM

Title: removing end of melodeon
Post by: myra on February 07, 2011, 08:01:18 PM
a bass button has disappeared inside my B/C button box. I am assured I can just take the end off and sort it myself. Do I really just pull out the four retaining tacks? Does this sound a recipe for disaster? Any helpful suggestions gratefully received. Thanks.
Title: Re: removing end of melodeon
Post by: Bill Young on February 07, 2011, 08:08:16 PM
No, don't remove the tacks (bellows pins) - that gives access to the reeds. To access the bass buttons and levers, remove the bass end plate - the plate under the bass strap (you should probably remove that as well). The bass plate is usually held on by 4 screws, one at each corner. Sometimes it's the bass feet that holds it on; it depends on the make of instrument. With the bass plate off, you should easily spot what's wrong.
Title: Re: removing end of melodeon
Post by: myra on February 07, 2011, 08:43:34 PM
Thankyou for that. All done. Just replacing the screws now  (:)
Title: Re: removing end of melodeon
Post by: Bill Young on February 07, 2011, 10:18:41 PM
You're welcome.  :|glug
SimplePortal 2.3.5 © 2008-2012, SimplePortal