Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: lincolnlad on February 24, 2011, 03:57:36 PM

Title: wooden finger board for pokerwork
Post by: lincolnlad on February 24, 2011, 03:57:36 PM
Does anyone know if it is possible to purchase a wooden fingerboard for my pokerwork and get rid of that nasty plastic one?
It seems worth it as it is a "Made in Germany" model
Might be quicker than making it myself!
Title: Re: wooden finger board for pokerwork
Post by: Lester on February 24, 2011, 04:07:14 PM
This s the only place I know of that sells new wooden fingerboards

http://www.irishdancemaster.com/reedtuning.html (http://www.irishdancemaster.com/reedtuning.html)
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on February 24, 2011, 04:48:41 PM
Hi,
I can make you one if you are interested,I've now got jigged up to produce bass boards for Saltarelle if anyone has one broken.
I had thought about doing these but hadn't got a sample to copy at the moment.

Pete
Title: Re: wooden finger board for pokerwork
Post by: Tufty on February 24, 2011, 06:21:30 PM
I would certainly be interested in one for an erica and suspect I would not be alone.
Title: Re: wooden finger board for pokerwork
Post by: waldoB on February 24, 2011, 07:28:29 PM
Dancemaster has two types. One all wood, one with separate metal fingerboard, available for both Pokerwork and Erica. I fitted one to my Pokerwork, a worthwhile modification I think. Much easier to set up the button travel, and because it is slightly wider the instrument is more stable, and it has a thumb groove. The action does need to adjusted after fitting.
Title: Re: wooden finger board for pokerwork
Post by: Andy Simpson on February 24, 2011, 07:35:31 PM
and suspect I would not be alone.

*puts hand up* Me too!.
Title: Re: wooden finger board for pokerwork
Post by: lincolnlad on February 24, 2011, 10:38:38 PM
Dancemaster has two types. One all wood, one with separate metal fingerboard, available for both Pokerwork and Erica. I fitted one to my Pokerwork, a worthwhile modification I think. Much easier to set up the button travel, and because it is slightly wider the instrument is more stable, and it has a thumb groove. The action does need to adjusted after fitting.



Is that irishdancemaster in the USA?
Title: Re: wooden finger board for pokerwork
Post by: waldoB on February 25, 2011, 06:41:48 AM
Yes. IrishDancemaster.
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on February 25, 2011, 07:49:57 AM
Hi
Has anyone an old unit for a template,I am prepared to jig up to produce these,

Pete
Title: Re: wooden finger board for pokerwork
Post by: Theo on February 25, 2011, 08:18:22 AM
Pete,  just a suggestion, but there would be big advantages in not making the fingerboard the same way as Hohner out of single piece of timber.  Better quality Hohner fingerboards are built up from a flat back panel with long edge and ends glued on, the top plate is held in place by screws.  This makes it much easier to set up the button travel by padding under the buttons. You can also then offer a variety of materials for the top eg timber, metal, plastic. I can loan you both types if you can't find them nearer to you.
Title: Re: wooden finger board for pokerwork
Post by: lincolnlad on February 25, 2011, 11:23:43 AM
Pete,  just a suggestion, but there would be big advantages in not making the fingerboard the same way as Hohner out of single piece of timber.  Better quality Hohner fingerboards are built up from a flat back panel with long edge and ends glued on, the top plate is held in place by screws.  This makes it much easier to set up the button travel by padding under the buttons. You can also then offer a variety of materials for the top eg timber, metal, plastic. I can loan you both types if you can't find them nearer to you.

Theo.
That is what I intended to do, but to machine it from one piece of hardword. i think the most difficult part would be accurately drilling all the holes for the top plate.
Title: Re: wooden finger board for pokerwork
Post by: Martin J on February 25, 2011, 11:55:23 AM
Whilst one the subject of finger boards and button travel, wouldn't it be better, if modifying, to change the buttons to those found on Castagnari's, Giustozzi, Hohner Merlin etc so that the button itself with a felt ring under it restricts the travel and removes all clatter.  I've put a pad restrictor under my hohners but they wear and become hard and the noise returns, albeit not so bad.
Title: Re: wooden finger board for pokerwork
Post by: Lester on February 25, 2011, 12:11:16 PM
I think the most difficult part would be accurately drilling all the holes for the top plate.

It may be even harder than you think as they are not round holes but oval slots?
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on February 25, 2011, 12:56:11 PM
Hi,
Theo sending sample,I'll be making in batches of 20 so anyone interested please e mail or send message,when sorted will email with price then you can confirm order if you wish.
Don't worry about slotted holes Lester,I've been making special components for customers for 30years and have the gear etc.

Pete
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on March 01, 2011, 11:12:04 PM
Hi,
Quick update,jigs under construction,waiting for durable paint samples,will have prices etc early next week.

Pete
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on March 02, 2011, 12:58:30 AM
Michael at Dancemaster is in Sarasota, FL USA.  Very good work, IMO, and also a good, reasonably priced tuner.
Title: Re: wooden finger board for pokerwork
Post by: brianread on March 02, 2011, 07:33:26 AM
Hi,
Quick update,jigs under construction,waiting for durable paint samples,will have prices etc early next week.

Pete

Is it just a "copy" of the plastic one or (for example) will it have a thumb groove?
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on March 02, 2011, 08:37:59 AM
Hi,
will have thumb groove or not if required and removable panel,just sorting out back or top.

Pete
Title: Re: wooden finger board for pokerwork
Post by: Lester on March 02, 2011, 05:09:09 PM
Hi,
will have thumb groove or not if required and removable panel,just sorting out back or top.

Pete

Removable panel on the top with a choice of wood or metal would be good
Title: Re: wooden finger board for pokerwork
Post by: melodeon on March 02, 2011, 10:45:59 PM
If you are going to make Pokerwork/Erica wood fingerboards..
just contact Dancemaster and have him send you my prototype..
as he won't return it to me after 2 years. Maybe he'll send it to you.

Mine had a removeable front and rear panel.
Suitable for any year any style Hohner 2 row whether Pokerwork or Erica.
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on March 03, 2011, 12:18:07 AM
El Jefe returns!
Title: Re: wooden finger board for pokerwork
Post by: EeeJay on March 03, 2011, 11:43:42 AM
...wouldn't it be better, if modifying, to change the buttons to those found on Castagnari's, Giustozzi, Hohner Merlin etc...

Hmmm... these are usually 'mushroom' type - where the key travel is stopped on the plate of the closed stepped keyboard...

I have heard some of the Tex-Mex guys fitting Italian bass buttons (typically sourced via Gabbanelli) to the treble end of Coronas. Some of the Irish box fettlers (I think Martin Quinn?) will also change the buttons for (I think bigger?) Italian size. I think it's something moreso to do with improving the button's shape/tactile interface... something important to certain players in both traditions...

Ed J
Title: Re: wooden finger board for pokerwork
Post by: Gandy on March 03, 2011, 04:35:31 PM
Theo.
That is what I intended to do, but to machine it from one piece of hardword. i think the most difficult part would be accurately drilling all the holes for the top plate.

I made mine like that.  I tried two different methods, (1) drill the holes through the top of the block, then route the required clearance from the underneath, then finally rebate underneath to fit a bottom plate.   (2) route from the top and rebate for an inset metal plate.   Both ways are workable, for a one-off the second method has the advantage that the alignment of the holes to the buttons is carried out after the body of the finger board is mounted. 
Title: Re: wooden finger board for pokerwork
Post by: brianread on April 04, 2011, 12:42:40 PM
Hi,
will have thumb groove or not if required and removable panel,just sorting out back or top.

Pete

any news on these? - I have just got to the stage of needing to fit the keyboard on my pokerwork, and was wondering....
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on April 04, 2011, 12:53:16 PM
Hi Bian
In production at the moment,sorry about delay but a large rush job came in for a regular client,should have something next week.


Pete
Title: Re: wooden finger board for pokerwork
Post by: brianread on April 04, 2011, 02:06:56 PM
Hi Bian
In production at the moment,sorry about delay but a large rush job came in for a regular client,should have something next week.


Pete

ok, thanks, I'll re-fit the plastic pro-tem
Title: Re: wooden finger board for pokerwork
Post by: brianread on April 28, 2011, 07:46:18 PM
Sorry to be a pain - but any news on this?
Title: Re: wooden finger board for pokerwork
Post by: melodeon on May 01, 2011, 02:15:30 AM
HAng on.. maybe my prototype made it to China by now...
Title: Re: wooden finger board for pokerwork
Post by: RickC. on May 11, 2011, 10:26:05 PM
Yes, any word on this?

Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on May 13, 2011, 11:21:25 AM
Hi Everyone,
Really sorry about delay,We have had our house and workshops for sale for 3 years with no takers,suddenly a cash buyer came along 3 weeks ago and did a deal,we had no house in mind to move to after been disappointed before,luckily I have sorted out workshop but as yet no place to live.
Will get back onto these asap

Pete
Title: Re: wooden finger board for pokerwork
Post by: HallelujahAl on May 13, 2011, 12:20:37 PM
Quote
Hi Everyone,
Really sorry about delay,We have had our house and workshops for sale for 3 years with no takers,suddenly a cash buyer came along 3 weeks ago and did a deal,we had no house in mind to move to after been disappointed before,luckily I have sorted out workshop but as yet no ware to live.
Will get back onto these asap

Pete
Never thought I'd be congratulating someone on their homelessness  ;D - however I've just got to say that your house sale is good news after all that time! Hope you get something sorted soon - and will hold you both in my prayers. Kind regards, AL
Title: Re: wooden finger board for pokerwork
Post by: Eoin on July 09, 2011, 10:17:27 PM
Pete,
I hope your domestic waters are flowing a bit more smoothly now.  On the subject of wooden fingerboards (with thumb groove), any chance of conjuring up same for a Hohner Trichord?

atb,

Eoin
Title: Re: wooden finger board for pokerwork
Post by: RickC. on December 25, 2011, 08:51:08 PM
So.... this just isn't happening?
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on December 26, 2011, 12:04:15 AM
Why does this thread remind me of:

Nigerian long lost uncles' inheritance

You have won $1 Million dollars!! To claim, please send $20 to PO Box.......

"I will gladly pay you Tuesday for a hamburger today...."
Title: Re: wooden finger board for pokerwork
Post by: RickC. on December 26, 2011, 01:57:54 AM
Why does this thread remind me of:

Nigerian long lost uncles' inheritance

You have won $1 Million dollars!! To claim, please send $20 to PO Box.......

"I will gladly pay you Tuesday for a hamburger today...."

HA!  Yep!
Title: Re: wooden finger board for pokerwork
Post by: old geezer on December 26, 2011, 09:32:18 PM

"I will gladly pay you Tuesday for a hamburger today...."

do u want fries with that  ???  ???
Title: Re: wooden finger board for pokerwork
Post by: Theo on December 26, 2011, 11:03:18 PM
I think Peter deserves a bit more sympathy on this.  Setting up to make a replacement Hohner fingerboard is not a trivial task or several people would have had then in production by now. 
Title: Re: wooden finger board for pokerwork
Post by: pete /acorn on December 26, 2011, 11:19:08 PM
Hi
Many thanks Theo,
I'm sorry to everyone for delays,since I last posted I actually managed to sell house and workshop premises after 3.5 years trying,moved house,moved and set up new manufacturing workshop,and managed to get 3 Sundays off in last 6 months due to commercial contracts.

I didn't take any actual orders.

The finger boards will be looked at again in January now new machines installed,will keep members informed.

Pete
Title: Re: wooden finger board for pokerwork
Post by: Prestidigitator on December 27, 2011, 08:43:13 AM
I think Peter deserves a bit more sympathy on this.  Setting up to make a replacement Hohner fingerboard is not a trivial task or several people would have had then in production by now. 

Seconded.
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on December 27, 2011, 03:43:08 PM
Gentlemen, you are right. 

Peter, my apology.

Reason why I posting in the "tone" I did is that, even in the short time I have been on the melnet, I do not believe anyone (yet) has actually "produced" these fingerboards.

I might be wanting one though, have grown to really like the feel of finger grooves.

Title: Re: wooden finger board for pokerwork
Post by: RickC. on December 27, 2011, 05:00:05 PM
I think Peter deserves a bit more sympathy on this.  Setting up to make a replacement Hohner fingerboard is not a trivial task or several people would have had then in production by now. 

Sure, no offense intended.  Just checking back in on this.
Title: Re: wooden finger board for pokerwork
Post by: boxcall on December 29, 2011, 12:58:41 AM
Hi all ,
I was repairing (slowly) a Hohner 1040  the Finger bd. was missing pieces between the holes.
Common I assume ? Any way made the first one out of solid cherry good fit and spacing wasn't to bad but
I elongated the holes to much then I saw this thread where Theo mention removable back so thought I would just practice with one I made to see if it could be modified to have removable back so I ripped top to bottom then added back 1/8 " filler strip keeping front and back the same thickness. Then it could use concave groove on top where the two pieces meet.


Then I tried to repair existing finger bd. by making an insert which I liked because I could keep
the decoration of the original and add some interest with walnut or other wood type to insert
this approach needs some supports installed in the mortise as shown in pics. (not sure if this could be adapted to a two row this method does need supports and I don't have one.) and screws on end to hold in place . pretty easy to do  if I pattern a few inserts at a time then mortise out original and drill holes I can even use tick mark on bottom of finger bd. to align holes.
I could repair some for people if there was enough interest.
I live in the US. so shipping could pose a problem and could not do it for less than cost of the replacement units plus shipping.
 
Michael
Title: Re: wooden finger board for pokerwork
Post by: boxcall on December 29, 2011, 01:02:45 AM
Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael
Title: Re: wooden finger board for pokerwork
Post by: Gandy on December 29, 2011, 09:37:28 AM
I made a couple of prototypes.  One was cut from a solid block, drilled from above for the buttons then routed out from underneath to provide enough clearance for the mechanism.  The bottom is rebated into the block and screwed on from underneath.   Made out of nice wood I think that design would work well, with the fasteners only visible from the back.
Title: Re: wooden finger board for pokerwork
Post by: Rob2Hook on December 29, 2011, 03:48:08 PM
I like the cherry fingerboard!  Not that there's anything wrong with the insert, but the whole replacement is very attractive.

It reminded me that I once harboured the ambition to make a whole keyboard and action - a wooden action to fit on a Pokerwork.  I almost feel tempted to do it, seeing what others have achieved!

Rob.
Title: Re: wooden finger board for pokerwork
Post by: Theo on December 29, 2011, 05:36:22 PM
Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael

I think I have a new old stock spare one of those!   Could have saved you some work.  :D
Title: Re: wooden finger board for pokerwork
Post by: diatonix on December 29, 2011, 08:10:46 PM
I had to repair an identical fingerboard a couple of years ago. I removed the whole upper part, made a replica with my laser (incl. the ornament) and glued it back on. I still have that CorelDraw program. Those of you who don't mind doing the removing, gluing and varnishing themselves are welcome to pm me.
Title: Re: wooden finger board for pokerwork
Post by: melodeon on December 30, 2011, 03:47:17 AM
True,

It is not a trivial task.  I spent a great deal of time making several prototypes and finally ended up with one that could be used on pokerworks and Ericas. It needed only minor tweaking to hole size and spacing from the "soundboard". 

This prototype was sent to Michael Usui of Dancemaster accordeons for his approval and never returned. It has now been three years.
When and if he does this , I will be pleased to put them into production.
Title: Re: wooden finger board for pokerwork
Post by: Kimric Smythe on December 31, 2011, 06:19:13 PM
I tried my hand at this the other day for a customer.
http://www.flickr.com/photos/26639011@N06/6607764723/in/photostream (http://www.flickr.com/photos/26639011@N06/6607764723/in/photostream)
I made the deck out of model aircraft birch ply then laid a piece of cherry over it along with some trim I had around.
 You can remove the deck so it is easy to put padding stops behind the buttons.
The oval holes were the mot time intensive part.
 I used the old keyboard as a base and cut off the deck. I have a pattern now so the next would be a bit easier.

Kimric
Title: Re: wooden finger board for pokerwork
Post by: melodeon on December 31, 2011, 06:24:42 PM
As with the unit described by K Smythe..
Aircraft ply was used... both the front and rear panels were removable. No internal bridge supports were needed.
Padding a snap. Access for adjustment or repair from front or back.
The design was such that it looked appropriate on any style Hohner , old or new.
This fingerboard also had a thumbgroove.

Maybe it's in the works in China...
Title: Re: wooden finger board for pokerwork
Post by: boxcall on January 03, 2012, 12:33:07 AM
I like the cherry fingerboard!  Not that there's anything wrong with the insert, but the whole replacement is very attractive.

It reminded me that I once harboured the ambition to make a whole keyboard and action - a wooden action to fit on a Pokerwork.  I almost feel tempted to do it, seeing what others have achieved!

Rob.

Rob,
I like the cherry too!   It would look good oiled up.
But I really want to the keep original  as my grandfather
gave me the box and I like the idea of touching something he and other family members once use (sentimental fool).
The only reason I really want to repair and make playable is to pass it on to my children or grandchildren???? .
I need to do valves re-wax tuning noise-control  bellows work but would be better to replace?
I think it could play pretty good if repaired the only problem I had with it "minus the poor lower octave curly valve syndrome "
was sharp egde of base end during play.
As far as making your own action I say go for it!!


Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael

I think I have a new old stock spare one of those!   Could have saved you some work.  :D


Theo ,
Thanks for the offer but I think  I will try reuse the original. Do you think there would be enough room to make adjustments to button travel with insert?
Building a house for a living is work, tinkering in the work shop on something you enjoy is fun.
You don't happen to have a spare Paolo Soprani D D# box?  (:) that looks like it would be a nice box
and its a system of interest D on outer row half step on inner row.having only played one row not sure if I would go with D# or C#.
Michael
Title: Re: wooden finger board for pokerwork
Post by: Theo on January 03, 2012, 07:59:50 AM
Do you think there would be enough room to make adjustments to button travel with insert?

Yes, I have just done that on a more recent 1040, the one with black and gold finish.  I think yours would be exactly the same.
Title: Re: wooden finger board for pokerwork
Post by: anotherboxplayer on January 08, 2012, 10:23:29 AM
Try a gunstock maker!

When I had 3 old pokerworks (but new enough boxes not to have wooden fingerboards) I had several hardwood fingerboards made for me by a gunstock maker.  He used a pantograph to copy a plastic fingerboard and gave me wonderfully accurate walnut parts which I finished off with best London gunstock oil.
Title: Re: wooden finger board for pokerwork
Post by: Paudi on February 07, 2012, 06:38:25 PM
first I would like to thank the people in charge for letting me in join this web site . this is the first evening I got a chance to look at some of the Posts  enjoying it so far. I have been making finger boards for blackdots and erica's now for a number of years I make them for our own repair man John Brosnan Killarney , martin quinn and also Benny McCarthy of the band Danu and raw bar so if I can be of any help ,I try and Keep a number of them in stock I also have a lovely black dot striped down and new finger board with slightly bigger buttons on it in which i will be selling in the coming weeks so watch out for that .
Title: Re: wooden finger board for pokerwork
Post by: blackdot1234 on February 07, 2012, 07:00:51 PM
  a few pictures would be great are they ready to install with padding in place for buttons?
Title: Re: wooden finger board for pokerwork
Post by: Matthew B on January 10, 2013, 06:04:38 PM
Friends,
Tips, tricks, hints and suggestions on installing one of these would be much appreciated.
Thanks. 
Title: Re: wooden finger board for pokerwork
Post by: Kimric Smythe on January 12, 2013, 05:13:08 PM
Don't think installation is a big deal if you are using the old keyboard for a base like I did slide the buttons in till the clear the holes, leave the screws for the keyboard sticking out about a 1/8 inch so you can get them lined up in the holes. A new keyboard may require two people as one person should line it up, and when ready the other should drill some pilot holes for the screws.
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on January 21, 2013, 09:51:10 PM
"wooden finger board for pokerwork" is one of the "third rail" topics.... >:E
Title: Re: wooden finger board for pokerwork
Post by: Lester on January 21, 2013, 09:53:19 PM
"third rail" topics

? je non comprende
Title: Re: wooden finger board for pokerwork
Post by: deltasalmon on January 21, 2013, 10:09:22 PM
"third rail" topics

? je non comprende

The one's you don't want to touch?
Title: Re: wooden finger board for pokerwork
Post by: Lester on January 21, 2013, 10:20:52 PM
"third rail" topics

? je non comprende

The one's you don't want to touch?

Ahhh!
Title: Re: wooden finger board for pokerwork
Post by: Steve C. on January 22, 2013, 02:32:24 AM
thanks delta, we may have taught our friends an americanism, or at least maybe a "north americanism"?

http://en.wikipedia.org/wiki/Third_rail_of_politics
Title: Re: wooden finger board for pokerwork
Post by: 911377brian on May 08, 2013, 04:59:24 PM
I'm finding it really hard locating a fingerboard for a prewar 1040, but I'm not alone by the looks of things.I can see it has dropped off as a topic but from what I can see there hasn't been a resolution to the problem...or have I missed it..?  ???
Title: Re: wooden finger board for pokerwork
Post by: an bosca ceoil on May 08, 2013, 06:26:37 PM
Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael

I think I have a new old stock spare one of those!   Could have saved you some work.  :D
Title: Re: wooden finger board for pokerwork
Post by: 911377brian on May 08, 2013, 07:32:07 PM
.thanks Oh Sage One! I had spotted that from Theo, but it was 18 months ago... ever the optimist I've contacted Theo and am hoping for the best.....
Title: Re: wooden finger board for pokerwork
Post by: 911377brian on May 09, 2013, 11:46:50 AM
Oh Joy! Oh Bliss! Theo had two in stock, a black plastic one and an original wooden one. He's sending me the wooden one........ :Ph ;D
Title: Re: wooden finger board for pokerwork
Post by: an bosca ceoil on May 09, 2013, 12:19:33 PM
I will take the old one off your hands -  if you have no plans for it!
Title: Re: wooden finger board for pokerwork
Post by: 911377brian on May 09, 2013, 12:36:08 PM
Oh, Sage One! The box was given to me without a fingerboard, the deceased owners daughter said he played it without one....Sorry. [Bit difficult to believe...] ::)
Title: Re: wooden finger board for pokerwork
Post by: MatlockBather on May 09, 2013, 12:41:31 PM
I recently got one of these for my Pokerwork.

http://www.ebay.co.uk/itm/Hohner-Erica-Pokerwork-Pressedwood-melodeon-Fingerboard-Kit-/251261130632?pt=UK_MusicalInstr_Keyboard_RL&var=&hash=item3a80549788#ht_550wt_1386

Fitted OK with a bit of patience but as with others I needed to adjust the leavers a bit.

Seller also said he was planning on doing some for the 1 row / 4 bass Hohners too.

(seller no relation to me etc...!)

Si
SimplePortal 2.3.5 © 2008-2012, SimplePortal