Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Chris Cartwright on May 10, 2011, 10:20:53 AM
-
Hello all
I just got my reed blocks back from having had some note changes. Reassembled box with much anticipation only to find it leaks like a sieve.
I've checked for leaks as per various hints on this forum (cheeks, eyes), which works really well.
Unfortunately the result of this is that a significant proportion of the top row treble pallets seem to be leaking.
The instrument was working perfectly before I sent the reed blocks away. It's been in bits for about 3 weeks. The treble end has not been touched. Is it possible that the sound board/plate/fondo thingy could have warped in that time? Can overtightening the reed block attachments distort the plate? Any other suggestions?
It's a Loffet G&B by the way, if that makes a difference. The plate is wood (ply). It's less than 2 yrs old.
Thanks, Chris.
-
I would say that over tightening the reed block attachments could possibly deform the plate. If you take the blocks off does it still leak at the pallets? Plywood is a lot less likely to spontaneously warp than solid wood but I guess that is also a possibility.
-
Success!
Tried as you suggested and the leak vanished. Thanks waltzman.
Have subsequently re-fitted the reed blocks with judicious tightnening of screws and it's back to its old form.
Phew!
I suspect the problem lay in the brace bars across the tops of the reed blocks. These were quite tight and were probably pulling the two main blocks together slightly thus twisting the plate/fondo thingy (what IS that thing called??!?) via the securing brackets. I was pretty sure these were done up tight when I took them off, which is why I re-did them the same, but maybe I was mistaken.
Back to practicing again. And fun with my new buttons (how sad is that).
Thanks, Chris.