Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: swig on May 11, 2011, 07:25:03 PM

Title: Reeds and springs needed
Post by: swig on May 11, 2011, 07:25:03 PM
I need to do some repair work on my G/D Erica. Basically a couple of new reeds and  a couple of springs. Both on the treble side. Does anyone know of a supplier in the uk?
Title: Re: Reeds and springs needed
Post by: rees on May 11, 2011, 08:09:25 PM
CGM, listed under Shops and Repairers on this website home-page.
Title: Re: Reeds and springs needed
Post by: Owen Woods on May 11, 2011, 08:38:59 PM
Are you sure that you need new reeds? There are very few circumstances where that would be necessary, only if they were massively corroded, snapped or about to snap. If you're hearing a rasp or rattle then it's probably a loose valve or brittle wax. I'd get a repairer to look at it for anything to do with reeds if you haven't had any experience yourself, as whatever you do to them they'll need tuning afterwards and that requires experience, preferably on a junk box.

Springs aren't too difficult to replace I am told, although I've never had to do it.
Title: Re: Reeds and springs needed
Post by: HallelujahAl on May 11, 2011, 09:12:35 PM
As Rees has said Charlie Marshall's the fella
cgmmusical (http://cgmmusical.co.uk/CGM_Musical_Services/Welcome.html)
AL
SimplePortal 2.3.5 © 2008-2012, SimplePortal