Melodeon.net Forums

Discussions => Teaching and Learning => Topic started by: Daddy Long Les on June 06, 2011, 10:29:48 PM

Title: How do you number your bass buttons for reference?
Post by: Daddy Long Les on June 06, 2011, 10:29:48 PM
Ok. So I know how the right hand buttons are numbered on my two row D/G. From the chin end to the floor - 1,2,3 etc.  

But how do you number or refer to the bass buttons. I've obviously got 8. Any suggestions?  Does it matter how you do it or is there a set method or do you just refer to them by the notes and chords they generate?  I'm guessing this is not the case as some buttons generate the same chords and notes depending upon whether you're pushing or pulling.

Thanks in advance

Les
 ???
Title: Re: How do you number your bass buttons for reference?
Post by: ladydetemps on June 06, 2011, 10:35:05 PM
I use letters. Although rule of thumb (or should that be finger) is top four bass buttons for outside (d) row, bottom four inside (g) row.
Title: Re: How do you number your bass buttons for reference?
Post by: Lester on June 06, 2011, 10:46:33 PM
It is kind of strange, now you ask, that although people number the treble buttons I have no recollection of anyone talking about numbering the bass buttons.  ???

I learned on a one row which made live easier.
Title: Re: How do you number your bass buttons for reference?
Post by: StupidFingers on June 06, 2011, 11:11:50 PM
It is kind of strange, now you ask, that although people number the treble buttons I have no recollection of anyone talking about numbering the bass buttons.  ???

The only place I have seen the bass buttons numbered is the notation in "Maggie's Melodeon" where the buttons are numbered chin down and inwards from 1 to 8 (e.g. D/A is 1, B/Em is 5).
Title: Re: How do you number your bass buttons for reference?
Post by: george garside on June 06, 2011, 11:13:48 PM
since there are only  8 I think most people identify them by the name of the note/chord  eg D/G   C/C

george
Title: Re: How do you number your bass buttons for reference?
Post by: Chris Ryall on June 07, 2011, 07:31:01 AM
Chord names. You are going to have to assimilate the chord names anyway  - so might as well start now.

Actually the same goes for the right end. Well worth learning what notes are on which button and to ever number them seem to me an egregious  backward step.  ???
Title: Re: How do you number your bass buttons for reference?
Post by: Lester on June 07, 2011, 07:50:26 AM
Actually the same goes for the right end. Well worth learning what notes are on which button and to ever number them seem to me an egregious  backward step.  ???

Well it had to happen eventually - Chris and I are in 100% agreement, mind you I had to look up egregious   ;D
Title: Re: How do you number your bass buttons for reference?
Post by: Daddy Long Les on June 07, 2011, 07:52:02 AM
Good point Chris. Now where's that dictionary....................!!!!!!!!!!!!!!!! ;D
Title: Re: How do you number your bass buttons for reference?
Post by: Sandy on June 07, 2011, 07:58:07 AM
I saw/felt the bass buttons as pairs using the 'bass chart' from Mally's Absolute beginners. I needed that for quite a while. Don't know if there is a similar chart available on here.......................Lester ???

Sandy
 (:)
Title: Re: How do you number your bass buttons for reference?
Post by: Lester on June 07, 2011, 08:23:03 AM
I saw/felt the bass buttons as pairs using the 'bass chart' from Mally's Absolute beginners. I needed that for quite a while. Don't know if there is a similar chart available on here.......................Lester ???

Sandy
 (:)


This sort of thing

http://forum.melodeon.net/files/site/DG21acc.gif (http://forum.melodeon.net/files/site/DG21acc.gif)

and all its friends here

http://forum.melodeon.net/index.php/page,keyboard.html (http://forum.melodeon.net/index.php/page,keyboard.html)
Title: Re: How do you number your bass buttons for reference?
Post by: ladydetemps on June 07, 2011, 09:09:38 AM
I found I didn't really learn what my basses were called till I tried a bass run
Video showing clearly my playing a 'bass run' is here http://youtu.be/hCyfM3aOv28
and discussion here
http://forum.melodeon.net/index.php/topic,3212.0.html
Title: Re: How do you number your bass buttons for reference?
Post by: Simon on June 07, 2011, 09:16:01 AM
It is kind of strange, now you ask, that although people number the treble buttons I have no recollection of anyone talking about numbering the bass buttons.  ???
Part of the Netherlands uses the 'Sneeker' notation (Sneek is a city) with only numbers. I always forget which numbers correspond to the bass buttons though. Apparently the 1 and 2 are used for the D/A bass and chords.
(http://www.mycofun.nl/Trekharmonica/Afbeeldingen%20Trekharmonica/tabulatuur,%20sneek_V450.jpg)
Title: Re: How do you number your bass buttons for reference?
Post by: Daddy Long Les on June 07, 2011, 09:26:04 AM
Ok - right or wrong I've numbered my bass buttons 1 to 8 in the following way:-

D/A chord = 1  D/A bass note = 2  G/D chord = 3  G/D bass note = 4

then coming up the other side:-

C/C bass note = 5   C/C chord = 6  B/E bass note = 7  Bm/Em chord = 8

Sort of a clock face approach if you will.

I know I must learn the notes and chord names that these buttons generate and I'm sure I will but if I use my number system I will be able to play pieces on my G/C (if and when I get it) using my method.

Hope this makes sense!  (:)

Title: Re: How do you number your bass buttons for reference?
Post by: Chris Brimley on June 07, 2011, 09:34:16 AM
If you have a system for numbering bass buttons it would presumably somehow need to cater for boxes in the same key with more than 8 buttons, such that if you change box they don't mean different things.  This would be a little tricky, I'd have thought.  I agree with those (were they called greg, did someone say?) who just call them by chord or note, and push or pull.

Hang on, different boxes have different RHS 'start' buttons too, aren't there?  Logically, therefore ....

And to Daddy Long Les's point, well when you get your G/C you will, but you're then either going to have to relearn all the notes on the RHS too, or you're going to have to imagine they're in D/G, in which case you presumably wouldn't have a problem with doing the same on the LHS?
Title: Re: How do you number your bass buttons for reference?
Post by: Daddy Long Les on June 07, 2011, 09:36:38 AM
Point taken Chris.  I'm definitely open to suggestions at this very early stage in my melodeon playing.

Thanks for your input!
Title: Re: How do you number your bass buttons for reference?
Post by: Clive Williams on June 07, 2011, 10:09:32 AM
And to Daddy Long Les's point, well when you get your G/C you will, but you're then either going to have to relearn all the notes on the RHS too, or you're going to have to imagine they're in D/G, in which case you presumably wouldn't have a problem with doing the same on the LHS?

Yep. That's the catch! I tend to name the chords as they would be on a D/G box, regardless of what key the melodeon's actually in.

Clive
Title: Re: How do you number your bass buttons for reference?
Post by: Gary P Chapin on June 07, 2011, 10:48:03 AM
Yeah, every box is a transposing G/C for me.
Title: Re: How do you number your bass buttons for reference?
Post by: Kautilya on June 07, 2011, 04:36:01 PM
Actually the same goes for the right end. Well worth learning what notes are on which button and to ever number them seem to me an egregious  backward step.  ???

Well it had to happen eventually - Chris and I are in 100% agreement, mind you I had to look up egregious   ;D

hmmm, ref the hot numbering debate running elsewhere, I would have that Chris's implication NOT to follow the herd (technically the rest of the flock... of  sheep) was out of order! >:E
Title: Re: How do you number your bass buttons for reference?
Post by: Owen Woods on June 08, 2011, 01:55:57 AM
If you were going to number them then the logical way of doing it would be:

IV      III/VI
I/V     V/II

with b and c for bass and chord. That's based on a standard layout with the inner row being the "home" row. Or you could remember that it's G/D, C/C etc :P
Title: Re: How do you number your bass buttons for reference?
Post by: Chris Ryall on June 08, 2011, 08:02:42 AM
IV      III/VI
I/V     V/II

That makes enormous sense and is how I 'think' about chords. So when I pull that II chord my brain 'is in dorian mode'.  It changes the way to twiddle.  The V1 (Em)'s sensitive note is it's minor 3rd(G) so you tend to triplet and cut to that, or even E Blues.    The II (Am)'s  sensitive note is its 6th(F#) which is in the top part of its scale. So little arpegios are in order, and you are also supposed to play off the chord notes more. Clashing F# with other notes is also 'colourful'.

Note that Ukebert's numbering completely changes however if the key centre is different

D major
(b7)     VII/ii
IV/I     I/V
                  E minor
(V11*)  V/i                             
III/vii    vii/IV     

C is a numbered chord here only if you play Em 'natural/aolian' crossing to the G row on pull. Same applies to D -  you have to be in 'mixolidian/blues/pull D' mode or the chord sounds horrible.

Suspect this won't help the original poster. Didactically* I still think it's best he simply name them as per Georges post - and then  doesn't differentiate bass and chord - in the long run that doesn't matter
*gift for Lester
Title: Re: How do you number your bass buttons for reference?
Post by: David J on July 14, 2011, 02:34:49 PM
Agree with Chris and George. Far better to learn, and describe, the actual notes and chords the buttons sound than use numbers or meaningless letters.

When learning I devised bass notation (based around playing tunes in the key of G mainly) to annotate the dots for tunes I was learning, where a capital letter e.g. G, C,  D indicates playing standard (push G/push or pull C/pull D) basses followed by the chord in whatever pattern the time signature dictated.

For the 'alternative' D chords:
D1 push bass/pull chord
D2 pull bass/push chord
Dp push bass/push chord (if playing in the key of D that would be written just as a straight 'D')

and getting cleverer:
G/B B bass with G chord ( and other combinations similarly described)
and lower case 'g' 'c' etc for a bass note played by itself or instead of a chord in a run of bass notes.

Works for me, but I can appreciate than anyone not starting with some knowledge of music might find it harder to get their head around.
Title: Re: How do you number your bass buttons for reference?
Post by: Peter_T on July 14, 2011, 11:26:56 PM
I just think of them as the notes and chords they are. I can't see that adding another layer of coding/decoding is going to help.

Keep It Simple?

Granted I only play D/G- if I had C/f to contend with, I might have to think again.
SimplePortal 2.3.5 © 2008-2012, SimplePortal