Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: oread_uk on June 16, 2011, 02:56:13 PM
-
Something's just gone pop and my D/A bass button is now stuck in 'down' position (so the reed sounds all the time when the bellows are moved so I can't even ignore and fudge round it.) I have a Morris weekend this weekend and would really rather like to have a working melodeon.
I know I need to take the casing off the bass end to take a look to see what's going off. I'm also guessing that this is a really straightforward case of finding my screwdriver and just removing the case. But as I've never ventured into the innards of any melodeon before, I just thought I'd check first in case there was anything vitally important I needed to know before I did this. Just in case.
Ta,
Liz
Sandpiper, 2 row, D/G
-
Go on, go for it, it may be one of a couple of things, but will probably be self evident, be brave now and get that end off and just take a look, get back to us with what you see. AtB mory
-
Sounds like a broken spring so you'll need to get your hands on a spare or find a repairer. Opening up the bass end should be fairly straightforward with no nasty surprises to come flying out at you!
-
Thanks. I'll take a deep breath and have a go... I'm fairly certain it'll be a spring.
Here goes...
-
Its just the bass end cover you need to remove, the panel under the left hand strap, you may find it easier if you detach one end of the strap first. If the strap has an adjuster the simplest method is to slacken off the adjuster until it comes undone.
It might be a spring, it might also be that a pallet has come off its arm. That should be pretty obvious when you look inside.
-
Hi Theo et al,
Please forgive me if I'm asking stupid questions. By the panel under the strap, I take it you mean the flat panel with the hole for the air button in? I've loosened off the strap and taken the feet off, but if the panel you mean is what I think it is, it seems jammed in and I can't find anyway of gently prizing it off. With the exception of the hole left by the end of the strap, there isn't anything to get my fingers round. Is there an easy way of getting it off - I'm worried about using too much force and damaging something. Am I being really stupid and missing something very obvious...?
.
Liz
-
First check that there are no more screws, sometimes its just the feet, but some instruments have additional screws, they should be easily visible if there are any.
The panel can be a tight fit, sometimes you can get a grip with finger and thumb in two closely spaced sound holes, another approach is to see if you can get a wire hook in the gap round the air button, possibly depressing the air button to make room.
-
Thanks, definitely no more screws but at least I know I'm in the right place and I'll persevere with it! One way of learning a little more about my melodeon I guess!!
Liz
-
Thanks for the advice - base plate came off with a bit of coaxing. Definitely a snapped spring. Darren tells me there's a thread on here somewhere about fudging a fix, so I'll get searching and see if my inventor's skills are up to scratch...
Liz
-
If it is an Italian box the spring can usually be replaced without any more dismantling. Hohner and Chinese makes mustly need to have the action removed in order to withdraw an axle rod.
-
It's a Sandpiper (I was the person who bought you my melodeon on my way to and from Edinburgh May day weekend). Looking at it, the rod would need to be removed I'm sure. Think it'll have to wait till after the weekend now!
Thanks,
Liz