Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Pat. on June 18, 2011, 06:27:12 PM

Title: bass end
Post by: Pat. on June 18, 2011, 06:27:12 PM
Is it possible that my bass end reed blocks on my Boxeen B/C can be easily swapped with reed blocks from another box as my base is set to the modern Irish set up as opposed to the regular one and the thirds are missing as I was told by John Nolan[by e-mail] who tunes these boxeens that this system is all the rage now.I like the old /normal bass set up with guts in it.It is not all bad news however as they are Antonelli reeds ,so if the coversion is possible some one might well want to swap reed blocks ,truth is I do not want the hassle of going to a tunner and it seems such a waste.
Pat
Title: Re: bass end
Post by: Pat. on June 20, 2011, 07:35:49 AM
Well? is any body out there ?.
Title: Re: bass end
Post by: LJC on June 20, 2011, 08:26:10 AM
Unless you can find reed blocks of exactly the same dimensions it won't be possible just to put another machine's bass blocks straight in. Your best bet would really be to have a tuner convert what you have using as many of the existing reeds and the existing blocks.
Title: Re: bass end
Post by: Theo on June 20, 2011, 08:44:20 AM
Have to agree with LJC.   

If still looking for a swap it would be helpful if you defined exactly what you mean by the "modern" and "traditional" bass layouts as there are several candidates for each term!
SimplePortal 2.3.5 © 2008-2012, SimplePortal