Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Peter Stormy Hyde on June 28, 2011, 12:55:23 PM
-
The instrument that I use for my song accompaniment instrument is a G/D (original pitch) 3 row C Jeffries.
As a melodeon maker I then wanted make an instrument that was close to the concertina but not like a bigger 3 row melodeon, I wanted something nice and small and that had a sound closer to the concertina than the melodeon.
The Flutina that I make was the ideal choice as it is only 220mm x 120mm and has a single reed placed on to a floating reed pan similar to the concertina, giving it a sound closer to the concertina than any other melodeon I make.
The main problem here was that I would not get my 3rd row into the treble side, and as I used to play as much in the keys of C-F-A-E along with G-D I certainly needed that 3rd row to be able to create the chords that I required to play in those keys.
I started by making the treble side G/D that is the G row is an octave lower than the D/G melodeon.
On the bass side I have 8 buttons with a slide. The 4 offside buttons are the normal D/A and G/D chords and fundamentals.
This then gave me the 4 nearside buttons to play with. I was able to get another 12 single notes, by utilising the slide and re designing it so that when it was pulled it up it cut “out off play†4 reeds and at the same time brought in another 4 reeds “into playâ€, and there was always another 4 reeds “in play†all the time, no matter if the slide was up or down.
Button Slide Down Slide Up
1 D#/A# E/D Octave High
2 G#/F G#/F
3 D#/A E/D Octave Low
4 G#/F G#/F
You will notice that in the slide in the up position I get the first sharps and flats needed as I move one key sharp (G# for key of A) and one key flat (F for key of C) from the G/D also I have the E/D reversal that is sometimes very handy.
With the slide down I cut out the E/D but still retain G# and F and then bring in the next flats needed (Bb for key F) and sharps needed (D# for Key E)
If ever want to get over enthusiastic I could always change the off side buttons to single notes as well and then I could get all the reversals that my concertina has as well.
Like nearly all instruments in our field there is a compromise somewhere or other but the way this instrument is at the moment I find I can play all the chords that I need and I can still play it as a G/D 4 bass melodeon if I want.
I play the concertina left hand dominant as that’s where I tend to get the chords that I like to play, but I have found the shift over to playing mostly on the right hand with a little help from the left hand not such a painful experience
This instrument I call the Shantym’n, as my main repertoire is shanties.
Peter Hyde
-
since you're dropped in (and thanks for this little intro), do you do a shantym'n that is just a straight one-voice b/c like the castagnari lilly or salt epsilon....?
-
since you're dropped in (and thanks for this little intro), do you do a shantym'n that is just a straight one-voice b/c like the castagnari lilly or salt epsilon....?
My pleasure
I will make the instrument in any key that you want, and if I do not have the reeds (most unlikely) on the shelf I will order them in, I will even reverse the keyboard to 10-11 that some B/C and C#/D players find useful.
I have attached a photo of one of 3 Flutinas that came off the workbench yesterday, it is a D/G, timbers are off cut Brazilian Rosewood and the blond timber is Quilted Sycamore that was cut into veneers about 100 years ago or more, red timber is Padouk and was ordered by a player in the Morris Side, hence the dancer on the front.