Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: RusselS on July 02, 2011, 01:04:03 AM
-
Hi,
I've just received a new Hohner 2 row plastic keyboard housing and it shipped with the wrong screws. Does anyone know the right size and thread of the screws? The ones that shipped measure approx. 3.2 mm x 40 mm.
Thanks.
-
I had the same problem once, I think the screws are metric and I couldn't get any of the machine screws at the hardware store to fit. So.. not too much help, but if you're in the US, try Ace hardware for a match as my local Lowe's and Home Depot were useless in my search for the right part.
-
They are metric, I'll check and post the sizes.
-
They are M3 bolts, I have the devil's own job sourcing M3s that were long enough in the end bought a pack of these:
http://www.screwfix.com/p/rawlplug-spring-toggle-m3-x-50mm-pack-of-20/44319 (http://www.screwfix.com/p/rawlplug-spring-toggle-m3-x-50mm-pack-of-20/44319)
-
You may well find these at your local auto shop, Auto Care, Halfords, etc, they only seem to stock metric these days. mory
-
You may well find these at your local auto shop, Auto Care, Halfords, etc, they only seem to stock metric these days. mory
It was the length that was the problem, plenty of short M3s but you need them to be 39mm long.
-
On the plus side, when you've sourced some replacements they will ubdoubtedly be of better quality than the Chinese monkey metal in a new Hohner! They seem to use hot melt glue to seal them in and the head stripped out with very little force when I tried to take my keyboard off.
Note to self - buy new screws...
Rob.
-
I'm sure Hohner could provide you with the correct bolts after 6 weeks, (not including the month taken to reply to your email), at something like €5 each. ;D
-
On the plus side, when you've sourced some replacements they will ubdoubtedly be of better quality than the Chinese monkey metal in a new Hohner! They seem to use hot melt glue to seal them in and the head stripped out with very little force when I tried to take my keyboard off.
Note to self - buy new screws...
Rob.
Yes, and also take care when tightening them. I came into my metric system conundrum after twisting the head off the keyboard screw, with very little effort at all, leaving the rest still threaded in the socket. If the screw had not been so long I don't know how I could have removed it.
-
I am glad it was not just my gorilla like grip that snapped these bolts ;D For some reason the originals appear to by slightly waisted just past the head and that is were they snap.
-
One shot fixings. ;D
-
Hi,
I've just received a new Hohner 2 row plastic keyboard housing and it shipped with the wrong screws. Does anyone know the right size and thread of the screws? The ones that shipped measure approx. 3.2 mm x 40 mm.
Thanks.
These are the screws I use http://www.ebay.co.uk/itm/20-NEW-PAN-HEAD-MACHINE-SCREWS-/390169250462?pt=UK_DIY_Material_Nails_Fixing_MJ&var=&hash=item99ab2e955d#ht_518wt_905
The size is M3 x 40mm. Just select the size from the drop down menu.
Martyn
www.melodeonrepairs.co.uk