Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: RusselS on July 04, 2011, 11:17:00 AM

Title: Coil spring hook?
Post by: RusselS on July 04, 2011, 11:17:00 AM
I'm interested in a hook/tool for disconnecting/reconnecting coil springs easily and is there a simple method for this? As I need to remove the entire keyboard mechanism (which is entirely coil sprung) to do other work a handy hook would make the job much easier.

Thanks.
Title: Re: Coil spring hook?
Post by: Theo on July 04, 2011, 11:43:53 AM
I find a useful tool for this can be made from a screwdriver with a V notch filed in the end of the blade.  Mine is made from 2mm flat bladed screwdriver.  Of course it depends on what kind of keyboard you are working on.
Title: Re: Coil spring hook?
Post by: Bill Young on July 04, 2011, 12:03:28 PM
When I was a young graduate engineer, assigned to the field service division for experience (of card punches, sorters, collators, accounting machines etc) I had the very tool in my kit, called a spring hook. I can't find a similar device listed anywhere, but it was a tool about 7" long with a flattened, notched end, like Theo describes, while the other end had a small hook, like the second one from the left here. (http://www.maplin.co.uk/4-piece-spring-hook-and-pick-set-219418) Very useful for removing and replacing coil springs. It occurs to me that one could perhaps be fashioned out of a metal crochet hook.
Title: Re: Coil spring hook?
Post by: waltzman on July 04, 2011, 12:42:35 PM
A crochet hook also works well.
Title: Re: Coil spring hook?
Post by: Rob2Hook on July 04, 2011, 02:55:36 PM
A good friend gave me a small, metal crochet hook for Christmas, as I was going through quite a few springs on the Pokerwork.  Saves having a sore thumb!

Rob.
Title: Re: Coil spring hook?
Post by: Hasse on July 04, 2011, 10:02:13 PM
I'm interested in a hook/tool for disconnecting/reconnecting coil springs easily and is there a simple method for this? As I need to remove the entire keyboard mechanism (which is entirely coil sprung) to do other work a handy hook would make the job much easier.

Thanks.


You'll find a good selection of spring hooks in places like this: ELFA (https://www.elfa.se/elfa3~eu_en/elfa/init.do?toc=18704&name=tools_/_soldering#toc=19060;) click Tools - then click Special / Miscellaneous Tools - then go to page 2, and you'll find spring hooks. I use spring hook art. 1-5475/185 and 1-5430. I can recommend springhook 1-5475/185.

Title: Re: Coil spring hook?
Post by: squeezy on July 04, 2011, 10:12:45 PM
I don't know where you are, but here in Oxford there's an antiques/flea market every Thursday and there's a stall that always has a seemingly endless supply of second hand crochet hooks for 50p to £1 each.  If there's something similar near you then you should have a look for what's available - choose a nice small one with a bend (or bend the shaft yourself) - I find the open hooks easier to use than the ones with a hinged closing part.

Cheers
Squeezy
Title: Re: Coil spring hook?
Post by: rees on July 05, 2011, 09:58:19 AM
I just use a piece of bent piano wire as recommended by Emmanuel Pariselle.
Title: Re: Coil spring hook?
Post by: Owen Woods on July 17, 2011, 12:33:27 AM
I have a spring hook made by MusicMedic in the US. I had it years ago for doing woodwind stuff. It's quite a nice thing, but as far as I can tell, a crochet hook or bit of bent wire would do just as well.
Title: Re: Coil spring hook?
Post by: Rob2Hook on July 17, 2011, 12:20:56 PM
Another thing worth looking out for is someone selling used dentists tools.  I know it sounds weird, but once the surface finish is marred they are discarded and I have picked up small scrapers, etc at a boat jumble.  Another possibility is to slip an orange stick into a hypodermic syringe, flatten the needle and bend to a suitable shape - or is that considered non-PC nowadays?

Rob.
Title: Re: Coil spring hook?
Post by: Lester on July 17, 2011, 12:23:56 PM
Another possibility is to slip an orange stick into a hypodermic syringe

This is OK as long as you don't share with others
Title: Re: Coil spring hook?
Post by: Theo on July 17, 2011, 02:19:04 PM
Another thing worth looking out for is someone selling used dentists tools. 

Some tool shops sell things that are shaped like dentists tools but aren't.  They have various shaped spikes, hooks and probes and can easily be bent into whatever shape you need.   I have several that I use all the time.
SimplePortal 2.3.5 © 2008-2012, SimplePortal