Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Chris Ryall on July 05, 2011, 05:06:15 PM

Title: Burning off a soundboard
Post by: Chris Ryall on July 05, 2011, 05:06:15 PM
See http://www.youtube.com/watch?v=f1vgRiPg8vQ (from Olav Bergflodt's facebook).  I see EeJay's been there already.  Warning - fast forward may be appropriate but it's interesting. Olav comments: Nettopp. Forresten: Tidligere brukte man som regel drill og boret gjennom flere plater pÃ¥ en gang, noe som muligens gikk enda kjappere enn med min laser-metode. Problemet er bare det at man i de fleste tilfeller endte opp med runde hull og mye tapt klang...  ???
Title: Re: Burning off a soundboard
Post by: blafleur on July 05, 2011, 11:04:11 PM
It's awesome.  I offered to trade a used wife for one, and depending on the day, may throw in a couple kids.  No takers yet.
Title: Re: Burning off a soundboard
Post by: Simon on July 06, 2011, 09:36:55 AM
Olav comments: Nettopp. Forresten: Tidligere brukte man som regel drill og boret gjennom flere plater pÃ¥ en gang, noe som muligens gikk enda kjappere enn med min laser-metode. Problemet er bare det at man i de fleste tilfeller endte opp med runde hull og mye tapt klang...  ???
In 'English':
Exactly. did: formerly used mon usually drill and drilled through several discs at a time, something which possibly went even kjappere than with my laser-method. The only problem is that there is in most cases ended up with round hole, and much lost sound
Anyone tried 3d-printing yet?

Title: Re: Burning off a soundboard
Post by: waltzman on July 06, 2011, 01:25:06 PM
 I wonder how many melodeons you have to sell to pay for one of those.  ???
Title: Re: Burning off a soundboard
Post by: michik on July 06, 2011, 02:10:19 PM
I wonder how many melodeons you have to sell to pay for one of those.  ???

Only one ...  

I've checked the internet .. they are available from $2000 upwards

Professional devices 10.000 upwards

Title: Re: Burning off a soundboard
Post by: Andy Simpson on July 06, 2011, 09:34:43 PM
Yes, only one....if it was a genuine Old Grey Paolo owned by a famous player. ;D

There a quite a few options that you need to consider to suit your needs, it gets quite complicated and there's also some semi-hidden costs to get it up and running properly. I've had a proper written quotation for a similar machine to the one shown in the video and with tax, delivery, installation, extraction, etc it's more like £14000/€15500.
Title: Re: Burning off a soundboard
Post by: blafleur on July 06, 2011, 10:55:43 PM
I wonder how many melodeons you have to sell to pay for one of those.  ???

Only one ...  

I've checked the internet .. they are available from $2000 upwards

The ones I priced were $20,000, like Olav has.  A bit steep.
Title: Re: Burning off a soundboard
Post by: Simon on July 07, 2011, 09:17:03 AM
Or you can build your own (http://www.buildlog.net/cnc_laser/index.php). Unless you need to do a lot of cutting it's cheaper to take your design to a laser cutting service.
Title: Re: Burning off a soundboard
Post by: TomB on July 07, 2011, 02:31:31 PM
Reminiscent of the old vector pen plotters I you'st to repair many moons ago, just substitute laser for pen  :o
Title: Re: Burning off a soundboard
Post by: michik on July 07, 2011, 03:04:23 PM
Reminiscent of the old vector pen plotters I you'st to repair many moons ago, just substitute laser for pen  :o

That's an idea ... I have an old A3 pen plotter at home :-)
Title: Re: Burning off a soundboard
Post by: upmine3 on July 10, 2011, 05:50:41 PM
Just curious in the video it cut what seemed 2 identical sounboards side by side. I wonder if they were rigid enough to do 2 different melodeons or was he going to glue them together for one solid piece?
Title: Re: Burning off a soundboard
Post by: oggiesnr on July 10, 2011, 07:32:42 PM
£15,000 to £20,000 will get you one you can use for this sort of work but there's a fair amount of consumables etc to add to that (plus a lot of fun on CorelDraw getting the planning dead right)  They've come down a lot in the time since I first priced one up, then it was £50k plus for similar performance.

As a comparator, assuming that those are one-eighth ply that would take me about an hour to cut BUT as I stack cut I would be cutting eight at a time, it would take 75pence worth of blades and the machine only cost £500.  The downside being I couldn't just leave it to run and get on with another job whilst it was cutting.

Steve
SimplePortal 2.3.5 © 2008-2012, SimplePortal