Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Geoffleft on August 07, 2008, 01:55:10 PM

Title: PZM Mic's...'Crown Sound Grabber 2'
Post by: Geoffleft on August 07, 2008, 01:55:10 PM
Just mulling over old ground, and thinking about the days when a trip to the Tandy store down the road with Aust.$69.95 would open up the doors of Heaven itself...OK.. gigs were easier come by in those times before Waterson/Carthy visited our Champagne shores, but.....
Has anybody tried using the Crown 'Sound Grabber 2' PZM's as replacements for the old Tandy PZM's? Current  Australian price for these is around $225, which would still be reasonably reasonable if they were as capable and flexible as the old PZMs which were produced as a budget product, as I understand.
Comments freinds?
Title: Re: PZM Mic's...'Crown Sound Grabber 2'
Post by: Rob2Hook on August 08, 2008, 01:48:27 PM
I don't know what the frequency response of the original Tandy PZM was, but the grabber is around 40Hz-16KHz, if I remember rightly.  The premium Crown models have a far more exciting 20Hz-20KHz response.  That seems more in keeping with Andy Cuttings remarks about getting the real low frequency, dark sounds from the bass, yet catching all the harmonics!  It might be worth considering using the mechanics of the grabber, but substituting the high-grade Panasonic capsule used in the premium grades (each capsule costs around £2).  I've bought a few of the capsules with an eye to making my own and have a Tandy coming over from the States for appraisal.  Not expecting any imminent results/conclusions, but I'll post what comes of it - eventually.
Rob.
Title: Re: PZM Mic's...'Crown Sound Grabber 2'
Post by: Geoffleft on August 11, 2008, 04:19:08 AM
Thanks for your info Rob2Hook. I have the origional Tandy PZM User Guide in front of me at the moment and it's interesting to note that the specs. rate the Frequency Response as 20 -18,000Hz, wider than for the 'Crown Sound Grabber 2'.
One thing that these notes suggest, and that was widely accepted practice with these Mic's, especially in recording and studio applictions was to mount them on a larger plate. The way we used them (still do in my case) was to take the mic unit off it's steel plate and mount it using the origional screws on to a perspex plate shaped like, and about the same size as a shoebox lid. This was gaffered on to the offending accordion (In my case a Hohner Corona 11-GCF). Some piano accordionists used two PZMs on the same plate as they had a larger area to pick up from.
We also ran them with 9volt batteries, which increased the signal significantly.
This worked well in my thankfully brief faze of playing in a rock outfit with a REALLY loud bass, drums and electric guitar. Like I mean loud!!!!! I still got the headroom I needed, and had the others complaining that the Box was too loud...poor little darlings....heh heh heh.
But it was a fun band..we did this tune called 'Thunder Road' Duetting Electric guitar with my Acadian D. Quelle Horeur...it was great, but it sure wasn't Cajun.
I wonder if the 'Crown Sound Grabber 2' would take to the same user customizing, or if it has had this capability designed out of it? 
SimplePortal 2.3.5 © 2008-2012, SimplePortal