Melodeon.net Forums
Discussions => Tunes => ABC => Topic started by: dahlberg on August 17, 2011, 08:04:20 PM
-
I dont know if this nice little program had been covered before,but its great.
The best part you can convert midi-files to abc,but its also good for knacking abc to nice looking sheets.
http://nilsliberg.se/ksp/easyabc/ (http://nilsliberg.se/ksp/easyabc/) download and test.
-
I may have seen it before but it must have been some time ago - I'll give it a try!
-
Looks good. This program gives a nice score printout via the PDF route. I note that, when the ABC source contains chord symbols, the program automatically places the chords above the staff. I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
-
I've been meaning to get to grips with ABC for ages but just not getting round tuit. I've just downloaded 'EasyABC' and within a few minutes, I've written out a tune in ABC that plays exactly how I want it to. Pretty slick, huh! Now I've got no excuse for not learning ABC.
-
I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.
Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)
That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.
(Many programs like ABCNavigator and ABCexplorer use abcm2ps as a back end to do the processing)
-
I use a little script to muck around with abc files before creating a PostScript file. It would be trivial to add a line at the top of the headers. eg.
sed -i '1i V:Chords gchord=down' tunename.abc
That seems to work with abcm2ps.
A proper switch would be better obviously since that could be used with all those different front-ends. Personally I don't use them, I like my GNU command line 8)
-
I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.
Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)
That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.
By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:
"G" G2 B2 D2
To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:
"_G" G2 B2 D2
-
I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.
Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)
That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.
By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:
"G" G2 B2 D2
To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:
"_G" G2 B2 D2
This doesn't address Anahata's point, ie. a switch that is given to abcm2ps so that any file can be printed one way or the other regardless of the ABC code. It seems a very sensible idea.
Edit: changed "will be printed" to "can be printed".
-
That is so silly I'm tempted to get the source code, hack an update ...
I had a look and it's all C to me ... so, failure here ::)
Not that I expected it to be in anything other really.
-
I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.
Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)
That's how it's done in the converter I've been using - http://www.colinhume.com/Music.aspx (http://www.colinhume.com/Music.aspx). If you paste in an ABC, click "Convert", on the next page you get a button for "Chords Down". Click that, then look at the resultant ABC (another button),and "V1: gchord=down" has been added (he doesn't add the V:2 after, however). As he says on one of his pages - http://www.colinhume.com/instruct.htm (http://www.colinhume.com/instruct.htm), bottom of page, "Music", he sends the ABC to the converter at http://www.folkinfo.org/songs/abcconvert.php (http://www.folkinfo.org/songs/abcconvert.php), which uses abcm2ps.
Some concatenation there, eh!
-
Looks good. This program gives a nice score printout via the PDF route. I note that, when the ABC source contains chord symbols, the program automatically places the chords above the staff. I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility (http://www.colinhume.com/Music.aspx) to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
Drop a mail to Nils who have done this,his very nice and open for suggestions. I have followed since 1.1 wich were posted on folkwiki,many people responded wit wishes and bugs etc. its good when you can help someone to develop a better working program.
-
I contacted Nils Liberg regarding the discussion on chord placement, and received this response:
"Hello Bill,
Thanks for your mail. I have sent a question to Jean-Francois Moine - the developer of abcm2ps - to hear if he'd be willing to add support for a general chord placement instruction. I think that would be the best solution.
Best regards,
Nils Liberg"
So perhaps abcm2ps will be changed to provide a choice of chord placement.
Meanwhile, thanks to the advice given earlier, I have used the "v1: gchord=down" a couple of times today to print scores the way I want them.
-
By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:
"G" G2 B2 D2
To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:
"_G" G2 B2 D2
[/quote]
Steve - I tried editing a tune I already had using this method in ABCNavigator and all I produced by so doing was to produce Chord Symbols above the line showing an underscore before the Symbol. Where did I go wrong?
Chris. :(
-
By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:
"G" G2 B2 D2
To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:
"_G" G2 B2 D2
Steve - I tried editing a tune I already had using this method in ABCNavigator and all I produced by so doing was to produce Chord Symbols above the line showing an underscore before the Symbol. Where did I go wrong?
Chris. :(
This method works fine for me when exporting the ABC to a PostScript file or PDF file for printing. However, it may be that it only works in abcm2ps, which is a Barfly (Mac) export conversion to PostScript. That's about as much as I know, sorry.
-
abcm2ps is an extension of the programme abc2ps, different versions of both programmes will act, um, differently.
-
I don't know if there are any conventions but it seems to me that guitar chords are written over the line being played which I'm quite happy with. I don't seem to have a problem with chords under the treble clef but it the bass clef is there as well I find them a bit detached and definitely prefer them at the top in such cases. Are they at the top in ABC because that is the more usual way of doing things ?
-
I suspect they appear over the stave by default because guitar chords often appear in music with song lyrics, and if you had both below the stave there would be interference, or the the need for extra space to keep them apart.
-
Unless I'm missing something I can't see how to paste a file directly from the clipboard which I find a really useful feature in AbcNavigator.
Steve
-
Steve,
I've just opened EasyABC. One of the 3 panes (lower right) is labelled "ABC code". I find I can paste ABC in there from the clipboard, no problem.
-
Steve,
I've just opened EasyABC. One of the 3 panes (lower right) is labelled "ABC code". I find I can paste ABC in there from the clipboard, no problem.
Thanks.
Another question - anyone know what position on the tempo bar equates to the speed of the piece as written?
Steve
-
Another question - anyone know what position on the tempo bar equates to the speed of the piece as written?
As far as I can see there is none. I run three different pieces of free ABC software, all have their merits but none are perfect so I run the application that does the job I need doing at the time. Mostly that's ABC Explorer, the front end I like to work with most of the time but it has it's limitations so I turn to things like Easy ABC for specific tasks that that bit of software does rather well.
-
I use ABC Explorer on PCs, and then found Easy ABC when I got myself a Macbook and was looking for a program to run on that. I like the clean look of it compared to Explorer and it does some things very well, like live editing of the code and seeing the notes change in real time, but there are some odd buggy things too. The latest version closes the program instead of the file on Cmd W or on the drop-down menu, but on the other hand it has a really useful way of generating a page of 'incipits' (I didn't know what they were either until I tried it, and then had a eureka moment, because I been wanting this kind of aide-memoire for a while) - for the equally uninitiated, they are just the first few bars of a tune. You can specify how many bars, and how much of the title info etc you want to print.
So, although there are some jobs which Explorer still does better I think Nils will end up with a really great program. Look forward to 1.4.
-
To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:
"_G" G2 B2 D2
Not the best solution. The underscore is used to put text under a note, just like the caret (^) is used to put text above a note. So according to the specification "_G" is just a "G" under the note, i.e. it isn't a chord any more. Depending on the software chords are treated differently from text (perhaps font, but also text doesn't transpose as chords should).
-
One thing this program does very well is merging abc files together. Last night I merged eight of my collections into a single file, deleted duplicates (manually), rearranged the tunes in alphabetical order and then renumbered the tunes to keep it it all tidy (OCD satisfied!).
The ability to edit the actual abc file directly without opening individual tunes makes some tasks far easier. Making a lead-sheet is a cinch too!
-
Now peops - be gentle with me here! I currently use ABC Navigator 2(.0?). For our band we'd like to be able to create a hard copy tune book. We know how to create the dots with chord symbols but haven't come up with any satisfactory method of holding the results - i.e. a bunch of score pages in a separate file suitable to create a printed version from. There's also the problem of how we share the book with all the members of the band plus occasional deps. Anyone know of an elegant and easy solution. My PC is Windows7. I use ABC quite a lot for learning tunes but my use of the software's really elementary and all my tunes are currently held on the tab called 'score' in alphabetic order. I tried downloading Easy ABC the other day but had to give up because I couldn't even find the individual tune files to import. :|bl So, if you know of a solution, could you keep the explanation as simple and non-tech as poss, please. I don't want to run more than one form of software for abc as I'm having enough trouble coping with one. So I suppose I'm asking for two things - firstly, a recommendation of the best software for general use and how to transfer my existing tunes to it and secondly, a method of creating the book. ;D
-
Try printing the tunebook as a PDF file which everyone can then read and print using Adobe reader.
You can download a freebie such as CutePDF writer to do this. It installs itself as another printer in your printer menu.
Alan
-
ABC Navigator should be able to export a tunelist straight to PDF. Lester would be the best person to ask about this as Navigator is his weapon of choice. I much prefer ABC Explorer and making a tune book with that is a doddle.
If all else fails email the ABC file to me and I'll send you a PDF ready to print by return.
Pete.
-
Another vote for CutePDF. Have attached example of ABCNav2 via CutePDF with some random tunes. ABCNav allows you to place page breaks wherever you like in the doc.
-
Thank you for this, guys - it looks exactly the sort of thing we need. Lester, forgive me if this has all been discussed before and feel free to re-direct me, but what's CutePDF, and how do the tunes have to sit in ABC Nav before they go via that to the final document? Also, is there a way in ABC Nav2 to organise the tunes into groups, e.g. 'jigs', 'hornpipes' etc. before exporting them (or for other reasons - such as Wm Irwin tunes, Playford etc.)? As I say, all my tunes are currently just in alphabetical order in one tab.
-
ABC Navigator should be able to export a tunelist straight to PDF. Lester would be the best person to ask about this as Navigator is his weapon of choice. I much prefer ABC Explorer and making a tune book with that is a doddle.
If all else fails email the ABC file to me and I'll send you a PDF ready to print by return.
Pete.
Pete, if I was to use Explorer rather than Navigator, how do I import my existing tunes to it? As I said in the original post, I couldn't find them when I tried Easy ABC. I've never understood where they sit - if I search my computer for a tune title it only finds examples of the title in Word files etc. and not tunes saved with Navigator. Sorry for being so thick!
-
Thank you for this, guys - it looks exactly the sort of thing we need. Lester, forgive me if this has all been discussed before and feel free to re-direct me, but what's CutePDF, and how do the tunes have to sit in ABC Nav before they go via that to the final document? Also, is there a way in ABC Nav2 to organise the tunes into groups, e.g. 'jigs', 'hornpipes' etc. before exporting them (or for other reasons - such as Wm Irwin tunes, Playford etc.)? As I say, all my tunes are currently just in alphabetical order in one tab.
CutePDF is a free programme that appears as a printer on your PC nad allows you to "print" to a PDF file. Get it here:
http://www.cutepdf.com/Products/CutePDF/writer.asp (http://www.cutepdf.com/Products/CutePDF/writer.asp)
To print from ABCNaV:
Right click on the tune and "Add to Print List"
Repeat for the all tunes.
Select the Print List Tab in bottom left of ABCNav window
You can then reorder the tunes, if you want too by dragging them in the list
To insert page breaks select the tune you want before the break and press the Page Break Icon line with up and down arrows
Check the layout with the Print Preview button (page and magnifier icon)
You can adjust line height, font size, etc with the sliders in the preview frame
Once happy select the print icon (printer picture ) and select CutePDF as your printer, it will ask for a location to save the file
And Bob's your Uncle
-
Just to point out that if you are using a Mac you don't need CutePDF. The ability to 'print' (i.e. convert) to a PDf has been available for years as an intrinsic part of the Mac OS system software (OS 10.4 or later). There is an option to generate a PDF document from any piece of software printable output. It's always in the bottom LH corner of the 'Print' dialogue box. Brilliant!
-
Thank you Lester - that's just what I needed - as I'm a tech-idiot I need an idiot's guide. :|bl ;D
Steve - I don't use a Mac - I have wondered about it, but didn't want my whole life to be devoted to the Apple empire, so have no iPhone, iPod, iBrow or iOwtelse!
-
Anyone compiled this for Linux, I thought I'd just see incase someone has done it and know what the gotchas are. I use Ubuntu (currently 11.04, soon to be 11.10).
The website mentions linux, but does not include any executables AFAICS.
-
Just to point out that if you are using a Mac you don't need CutePDF. The ability to 'print' (i.e. convert) to a PDf has been available for years as an intrinsic part of the Mac OS system software (OS 10.4 or later). There is an option to generate a PDF document from any piece of software printable output. It's always in the bottom LH corner of the 'Print' dialogue box. Brilliant!
If your mac was capable of displaying web pages correctly you would have read McGrooger's post that said "My PC is Windows7." ;D
With the free CutePDF you can create pdfs from any piece of software printable output. Brilliant!
-
Another option that I use for my morris side where I want text as well as tunes is to use ABC Explorer to create jpgs of the tunes and embed the jpg in a google doc that is then available to the team of the internet
https://docs.google.com/document/d/1Wy6ze4CUVMaqDGNZwUpTk1HYn0ehCcUtXUtN44sPQlQ/edit?hl=en_GB (https://docs.google.com/document/d/1Wy6ze4CUVMaqDGNZwUpTk1HYn0ehCcUtXUtN44sPQlQ/edit?hl=en_GB)
-
Anyone compiled this for Linux
I've just tried. Needed some python libraries installed, then said "invalid command 'py2app'" - py2app which appears to be something for packaging python programs for Mac OSX. I can't be bothered to try any further right now.
-
Just to point out that if you are using a Mac you don't need CutePDF. The ability to 'print' (i.e. convert) to a PDf has been available for years as an intrinsic part of the Mac OS system software (OS 10.4 or later). There is an option to generate a PDF document from any piece of software printable output. It's always in the bottom LH corner of the 'Print' dialogue box. Brilliant!
If your mac was capable of displaying web pages correctly you would have read McGrooger's post that said "My PC is Windows7." ;D
With the free CutePDF you can create pdfs from any piece of software printable output. Brilliant!
You're on song today, Lester. ;D ;D ;D
-
Anyone compiled this for Linux
I've just tried. Needed some python libraries installed, then said "invalid command 'py2app'" - py2app which appears to be something for packaging python programs for Mac OSX. I can't be bothered to try any further right now.
ok, I'll try at some point, but too busy this week!
-
With the version of Word for Windows that I have you don't even need CutePDF or equivalent - Word allows you to Save As pdf. Simples!
-
With the version of Word for Windows that I have you don't even need CutePDF or equivalent - Word allows you to Save As pdf. Simples!
Only useful for saving Word docs. I use Libre Office which allows saving as pdfs but would not solve he pdfing of tunes from an ABC programme.
-
I have a suspicion that Windows 7 has a built in pdf creator.
-
I have a suspicion that Windows 7 has a built in pdf creator.
Nope
-
I have a suspicion that Windows 7 has a built in pdf creator.
Nope
Another small reason to be glad not to use Windows! >:E
-
I have a suspicion that Windows 7 has a built in pdf creator.
Nope
Another small reason to be glad not to use Windows! >:E
With Windows you have the choice of many ABC programmes, with Mac I think there is BarFly that does not work with the new OS. Not sure how that is better than Windows.
Posted fom my iPad ;)
-
Pete, if I was to use Explorer rather than Navigator, how do I import my existing tunes to it? As I said in the original post, I couldn't find them when I tried Easy ABC. I've never understood where they sit - if I search my computer for a tune title it only finds examples of the title in Word files etc. and not tunes saved with Navigator. Sorry for being so thick!
This one's nice and easy to answer! Anything that Navigator will read is in a plain text file saved with the extension .abc and so it follows that all of your tunes are within small files in your documents folder. Click the start button > go to My Documents > at the top right of the window is a search box type the following into the box:
*.abc
The resulting list shows the files where your abc music is stored. It makes life a lot easier if you create a new folder called ABC and move the files you've found into that folder so they're all together. To open an ABC file in ABC Explorer click > File > Open local file > navigate to the ABC folder and chose the file you wish to open.
-
With Windows you have the choice of many ABC programmes, with Mac I think there is BarFly that does not work with the new OS. Not sure how that is better than Windows.
Posted fom my iPad ;)
Erm, the subject of this thread is a program called Easy ABC. It can be downloaded for Windows or Mac ... ::)
-
With Windows you have the choice of many ABC programmes, with Mac I think there is BarFly that does not work with the new OS. Not sure how that is better than Windows.
Posted fom my iPad ;)
Erm, the subject of this thread is a program called Easy ABC. It can be downloaded for Windows or Mac ... ::)
Oppps ;D
-
It may even work on an iPad :|glug
-
It may even work on an iPad :|glug
Na, Tunebook is the weapon of choice for an iPad.
-
With Windows you have the choice of many ABC programmes, with Mac I think there is BarFly that does not work with the new OS.
The Linux tools should work on Mac OS. RunABC and abcm2ps have a OSX versions, for example.
-
with Mac I think there is BarFly that does not work with the new OS.
Sadly, you are correct, Lester. BarFly will not run on the latest Mac OS 10.7 'Lion'. :(
This is because Barfly was written for Apple's PowerPC processors. When Intel processors came in (Mac OS 10.4.4 and higher) Apple included Rosetta, a translator/compiler in the OS which enabled PowerPC programs to run on Intel-based Macs. Now with OS 10.7, Rosetta has been discontinued (why, I don't know) so there will be quite a few bits of software, not just BarFly, which will no longer run. There's been some criticism as a consequence and maybe Apple can be persuaded to reintroduce Rosetta, but I'm not holding my breath. Meanwhile I will be sticking to earlier versions of the OS. I am doing quite nicely with OS 10.4, thank you very much. (:)
-
there will be quite a few bits of software, not just BarFly, which will no longer run.
Yet another reason to use open source software ;)
-
there will be quite a few bits of software, not just BarFly, which will no longer run.
Yet another reason to use open source software ;)
Or windows ;)
-
Now with OS 10.7, Rosetta has been discontinued (why, I don't know) so there will be quite a few bits of software, not just BarFly, which will no longer run. There's been some criticism as a consequence and maybe Apple can be persuaded to reintroduce Rosetta, but I'm not holding my breath. Meanwhile I will be sticking to earlier versions of the OS. I am doing quite nicely with OS 10.4, thank you very much. (:)
OK. It's not that Rosetta's just a program, that Apple can ship or not as they choose. Previous versions of OS10 had the internal gubbins (technical term) to run both Intel-optomised code and PowerPC-optomised code. Rosetta then sat on top of that helping the system run the PowerPC programs. Lion is faster and cleaner precisely because they've stripped out all the PowerPC stuff. So it will never run any PowerPC programs.
Unless you need or want the new features of Lion, there's no reason to upgrade at the moment. Eventually some fantastic Lion-only thing will come along, but it hasn't yet. Anyone who does decide to upgrade should use System Profiler to make sure they know exactly what PowerPC stuff they're running and work out an alternative.
I'm using the alpha of Tunebook which is linked to from this discussion on the Session. http://www.thesession.org/discussions/display/28068
-
Pete, if I was to use Explorer rather than Navigator, how do I import my existing tunes to it? As I said in the original post, I couldn't find them when I tried Easy ABC. I've never understood where they sit - if I search my computer for a tune title it only finds examples of the title in Word files etc. and not tunes saved with Navigator. Sorry for being so thick!
This one's nice and easy to answer! Anything that Navigator will read is in a plain text file saved with the extension .abc and so it follows that all of your tunes are within small files in your documents folder. Click the start button > go to My Documents > at the top right of the window is a search box type the following into the box:
*.abc
The resulting list shows the files where your abc music is stored. It makes life a lot easier if you create a new folder called ABC and move the files you've found into that folder so they're all together. To open an ABC file in ABC Explorer click > File > Open local file > navigate to the ABC folder and chose the file you wish to open.
Pete - thank you very much for your help and apologies for contributing to the highjacking of a thread that was about different software. I discovered something odd about the way tunes are automatically saved by Navigator and I think I've found a way round it which will help me to do some organising of my motley selection of abc tunes and would also help if I try using some of the alternative software available. Ta lots! ;D
-
OK. It's not that Rosetta's just a program, that Apple can ship or not as they choose. Previous versions of OS10 had the internal gubbins (technical term) to run both Intel-optomised code and PowerPC-optomised code. Rosetta then sat on top of that helping the system run the PowerPC programs. Lion is faster and cleaner precisely because they've stripped out all the PowerPC stuff. So it will never run any PowerPC programs.
Unless you need or want the new features of Lion, there's no reason to upgrade at the moment. Eventually some fantastic Lion-only thing will come along, but it hasn't yet. Anyone who does decide to upgrade should use System Profiler to make sure they know exactly what PowerPC stuff they're running and work out an alternative.
I'm using the alpha of Tunebook which is linked to from this discussion on the Session. http://www.thesession.org/discussions/display/28068
Thanks for that very easy to understand explanation, Alison! (:)
-
there will be quite a few bits of software, not just BarFly, which will no longer run.
Yet another reason to use open source software ;)
Or windows ;)
Not really.. I've got quite a few old windows programs that don't work with any windows version after '98 or something.
-
Pete - thank you very much for your help and apologies for contributing to the highjacking of a thread that was about different software. I discovered something odd about the way tunes are automatically saved by Navigator and I think I've found a way round it which will help me to do some organising of my motley selection of abc tunes and would also help if I try using some of the alternative software available. Ta lots! ;D
I don't think the thread was being hijacked in any way, the question (and answer) would have been the same if you'd wanted to find and open files with Easy ABC. If you're stuck with anything ABC or computer related and need help do feel free to PM me on here or email me: peterdunk(AT)btinternet(DOT)co(DOT)uk and I'll do my best to help.
Pete. ;D
-
You're most kind sir. Have a virtual :|glug on me! ;D
-
Have a virtual :|glug on me! ;D
I accept cheques and have no shame ... >:E