Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Sandy on August 18, 2011, 12:24:15 AM
-
My left wrist suffers quite a bit when playing the Hohner pressed-wood.......I might have to join the 'sweatband brigade'....or should I somehow remove the edge from the box ? (Sorry, don't know the 'wooden-chippy' technical term.)
cheers
Sandy
(:)
-
Maybe you could send a picture.
My left wrist does not even touch the corners of the box.
Maybe you have your bass strap miss-adjusted?
-
My left wrist does not even touch the corners of the box.
Nor does mine; back to the "101 different ways of holding a box".......... the usual solutions for those for whom it is a problem are padding on either the box or the wrist, or rounding off the edge of the box if there's enough meat in the timber and you're happy to refinish it. There may be aftermarket products along the lines of the edge protector, or whatever it's called, that seems to be included on Chinese Pokerworks these days, but I wouldn't know where to start looking.
-
Also known as "pokerwork wrist"
I fixed my pokerwork with padding around the offending corner. Actually padding up the cover plate to a substantial thickness may be better, so your whole hand is held away from the box (and you may need to slacken the bass strap to make room)
Wrist bands also help, but I kept losing mine.
-
On my Super Pokerwork* I have chopped the back edge of the bass end out and installed some 1/2" quarter dowel. This has completely solved the problem. The 1/2" radius matches the rounding on an Erica. AS soon as I have tidied up the installation I will post some piccys.
* Super Pokerwork:
- 4th Button "G-Scale" layout
- Respray in satin black
- Adjustable Bass Strap
- All new bright work
- Restricted treble action
- Removal of sharp edge on bass end
-
[pedant mode]
1/2" dowel = 1/4" radius
[/pedant mode]
If you play for long enough you will develop a callus. ;D ;D
Actually I'm serious, I'll show you mine if you show me yours.
-
[pedant mode]
1/2" dowel = 1/4" radius
[/pedant mode]
[super pedant mode]
I said 1/2" QUARTER dowel which in my world (a strange place) is equivalent to 1" dowel
[/super pedant mode]
-
Actually, isn't it usually called 1/2" quadrant? >:E
-
[pedant mode]
1/2" dowel = 1/4" radius
[/pedant mode]
[super pedant mode]
I said 1/2" QUARTER dowel which in my world (a strange place) is equivalent to 1" dowel
[/super pedant mode]
Note to self: wake up before posting!
-
Note to self: wake up before posting!
;D
-
If you play for long enough you will develop a callus. ;D ;D
Actually I'm serious, I'll show you mine if you show me yours.
It's a deal ! ;D
actually, apart from that, the swollen marked line across the wrist looks like a serious case of 'self-harm' :|bl
I'll look at the easier possibilities first...Anahata, what did you use for padding on the edge...any chance of a photo please ? ::)
As for playing position, I've had to change my style to compensate for a frozen shoulder. I really like playing that way and prefer it to my old two strap style. I don't get any problems from my Salterelle but it's not played as much....... I've become a Hohner girl :|||:
cheers
Sandy
P.S. might purchase a sweatband but .....oh the choice of colours !
-
Anahata, what did you use for padding on the edge...any chance of a photo please ? ::)
Some sort of self-adhesive thin foam rubber of the sort you might put in door frames to get a better seal. I don't know where it came from: there was a roll of it lying about the house.
Photo? I don't know, it ain't pretty!
-
Sandy,
sorryto hear about the frozen shoulder. I had that, first one then the other. It stopped me dancing, as I couldn't raise the arm enough for stars or sticking and ushered in an era of playing Pokerwork on a long single strap. It's a very loose style of playing and good fun but not suitable for "clever" tunes. Actually the Pokerwork is still on one strap - it seems to suit it, whereas all the others are on two. But then, all the others are heavier.
Rob.
-
[ultra pedant mode]
Actually, isn't it usually called 1/2" quadrant? >:E
Yes it is! I would probably say 1/2"quadrant beading. 1/2" quarter dowel indeed. ::)
[/ultra pedant mode] >:E >:E >:E