Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: melod-ian on August 13, 2008, 02:00:39 PM

Title: Cajun 3 row restoring
Post by: melod-ian on August 13, 2008, 02:00:39 PM
Hi all

Im taking on a project… (maybe a little over my head)  restoring a small Cajun single row 3 stop instrument
Does anyone know where Id get my hands on  replacement Bass Spoons? .. the type found on the Hohner single rows look like a large .. but I guess if it came to it  these can be used.

Cheers


Ian


Title: Re: Cajun 3 row restoring
Post by: Theo on August 13, 2008, 03:05:04 PM
Hi Ian

I may have something closer to the correct size in my melodeon scrapyard. Mind the dogs!  Send me an email off-line, or see me at my stall at Whitby Folk Week.

Theo
Title: Re: Cajun 3 row restoring
Post by: melod-ian on August 18, 2008, 07:19:40 PM
thanks theo

will do

ian
Title: Re: Cajun 3 row restoring
Post by: melod-ian on August 18, 2008, 10:30:29 PM
So my next problem is a little complicated..
I’ve taken a look as the reed housing.. the reed blocks are all glued in..
Problem is I wanted this to end up as  C box.. But I think its started it long life in G..
So im taking to fit a lower range octave into the blocks I have a set of C is going to be too big? >:( >:(

Title: Re: Cajun 3 row restoring
Post by: Pete Dunk on August 19, 2008, 08:41:24 PM
Hello Ian, any chance of you posting a few pics to illustrate your problem? Someone might be able to comment then.

Pete.  :)
SimplePortal 2.3.5 © 2008-2012, SimplePortal