Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: GanAinm on August 30, 2011, 08:57:51 AM
-
Can anyone tell me which Hohner piano accordion model has a bass end that is an exact fit for the standard two-voice Erica / Black Dot?
-
don't know of any that are an exact fit but Bill Young did a very neat conversion using an adapter plate. Full info is somewhere on this forum!
george
-
There is'nt one to my knowledge. The nearest fit is a Hohner Student 32/40/48 bass which is approximately the same as a Corona/Corso/Trichord
Dimensions
Erica 280 x 150
Corso/Corona/Trichord 310 x 190
Student PA 315 x 180
So whichever combination you choose you will require either an adaptor plate at one end of the bellows, or a specially made tapering bellows.
-
There doesn't seem to be a PA small enough to match an Erica/Double Ray. The Double Ray Deluxe (3-voice) is also the same size as the Corso/Corona/Trichord mentioned by Theo and is a near match for the Student/La Divina PA.
I recently had the chance to examine Bruce Lindsay's 48-bass Double Ray Deluxe, a photo of which was the main inspiration for my 48-bass Trichord project.
-
This Cantulia might also be a possible bass end donor
http://www.ebay.de/itm/Cantulia-senorita-Akkordeon-Dachbodenfund-/160644570902 (http://www.ebay.de/itm/Cantulia-senorita-Akkordeon-Dachbodenfund-/160644570902)
-
Or one of these cheapo Stella machines that Londonaccordions seem to have in quantity.
http://www.ebay.co.uk/itm/48-bass-stella-accordion-hard-case-lovely-red-/230666309243 (http://www.ebay.co.uk/itm/48-bass-stella-accordion-hard-case-lovely-red-/230666309243)
With the additional advantage of not having to destroy a nice Hohner student accordion.
-
I measured a couple of these Chinese PAs at a festival before doing the Trichord. They were both 33cm high, which I judged too high for the Trichord (and Corso/Corona/Double Ray DL). Certainly much too high for an Erica/Double Ray.
Added: The Cantulia is a 34-key treble vs 26 keys on the small Students and Chinese PAs, so the LH end is probably too big as well.
-
This may be crazy, but how about using the Stella and changing the RH end to a button keyboard with Erica reeds inside. ???
-
There is'nt one to my knowledge.
Many thanks to everyone who responded, saving me time and money trying to find one that fits.
-
...how about using the Stella and changing the RH end to a button keyboard with Erica reeds inside.
Yes, that's the general idea. If I knew for sure that it was the right size, I'd probably give it a try, but I think it's unlikely to be an exact match.
-
There have been various attempts to marry differing bellows dimensioned boxes together... search frankenstein or frankenbox here and it'll come up with some.
-
Here we go:
http://forum1.aimoo.com/melodeon/melodeon-net/Frankenstein-s-button-box-1-401254.html
http://forum.melodeon.net/index.php/topic,1686.0.html
-
...how about using the Stella and changing the RH end to a button keyboard with Erica reeds inside.
Yes, that's the general idea. If I knew for sure that it was the right size, I'd probably give it a try, but I think it's unlikely to be an exact match.
No not quite. Keep the whole box, remove just the piano keyboard and replace with a button keyboard, change the reed plates internally as required.