Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Harp2 on August 22, 2008, 02:05:54 AM

Title: Where to find parts?
Post by: Harp2 on August 22, 2008, 02:05:54 AM
I am looking for a good place to get replacement springs?
Title: Re: Where to find springs?
Post by: BruceHenderson on August 22, 2008, 05:30:57 AM
Hi all
I am need to replace some bass side springs on my old Hohner PA. I was wondering if anyone here can tell me a good place to find them.
I have attached a photos of one. They are about 7/8 inches long with a loop in the middle and the long end is about a 1/2 inch. I could maybe get by with 4 or 5 or them but all 24 would be ideal.
Appreciate any help.

   "The Button Box", western Mass?????
Title: Re: Where to find springs?
Post by: Harp2 on August 22, 2008, 06:28:07 AM
Thanks for the reply
I will check with them.
I found that http://www.mcmaster.com/ sells torsion springs.
Title: Re: Where to find springs?
Post by: Pete Dunk on August 22, 2008, 07:51:11 PM
Stick with the Button Box, general hardware suppliers aren't the answer. Dealing with accordions and concertinas is what the Button Box do all day every day.

This is presuming you're in the States of course ...

Pete.
Title: Re: Where to find springs?
Post by: Theo on August 22, 2008, 09:40:15 PM
Agreed, you won't get good results with springs from a hardware store.

In addition to the shape of the spring and the length of legs you need the correct thickness.  Thes look like the same springs used in Hohner melodeons where two different thicknesses are used in teh treble side, and at least another two thicknesses in the bass side.
Title: Re: Where to find springs?
Post by: Harp2 on August 24, 2008, 01:44:50 AM
I emailed the button box but no one has replied.
I found some here also but there is a language barrier.....http://www.carinidena.com/index.html?target=front.html&lang=it
I also found some here and the people were very helpful and friendly. the springs they have are longer but i will cut them down and give them a try.
http://www.hmtrad.com/catalog/winds/sbx/sbx-part.html#bass
Title: Re: Where to find parts?
Post by: TheStoneCrusher on September 26, 2008, 12:20:53 AM
I obtained two complete sets of springs for my box from the manufacturer, Alessandrini in Castelfidardo, Italy.  When I had them put in the mechanic mentioned that he had to cut part of the springs in some way.  I would suspect that the springs are all very similar.  But I would also follow the advice above about the thickness of the springs.  If you could borrow a micrometer, or . . . . bring your spring to a HomeDepot or the like and 'test' one of their micrometers for 'accuracy', you would probably have all the info you need.
Goodwill
Title: Re: Where to find parts?
Post by: finnhorse on September 26, 2008, 02:28:04 AM
Quote
I emailed the button box but no one has replied.
I found some here also but there is a language barrier.....http://www.carinidena.com/index.html?target=front.html&lang=it
I also found some here and the people were very helpful and friendly. the springs they have are longer but i will cut them down and give them a try.
http://www.hmtrad.com/catalog/winds/sbx/sbx-part.html#bass

I've had mixed results with the BB people; moreover, they don't specialize in PA's.  On one occasion I contacted them about a new Saltarelle which the webpage said was in stock, but received no reply.  I'd think the prospect of a sale like that would have been given more priority but maybe the message was lost somewhere.  Eventually, I bought my current instrument from the BB (a used Pokerwork) and they assured me it would be "checked over" in good playing condition before shipping.  After that initial contact and prior to arrival they did not respond to any of my other questions via email, so I had to call.  Upon arrival there was a hole in the shipping container, the bass end was pretty out of tune and the gasket leaked heavily.  Both problems have since been remedied.  Just a thought.  Sorry for the drift.

I found this US retailer who seems to specialize in PA's and has a wide assortment of parts available.  You might try calling him:
http://www.syn-cordion.com/parts.htm

This gentleman is in the Maryland area, he provided some helpful repair advice to me, even though it was about a concertina, he also has lots of parts on hand:
http://1accordion.net/

Of course, the next link would probably be more helpful :)
http://www.google.com/search?num=20&hl=en&safe=off&q=accordion+parts+springs&btnG=Search


If you decide to use springs from a non-accordion parts specialist, let us know how it goes.  I'm always interested in cheap, effective DIY repairs.  I fixed the gasket issue on the Hohner with some plumbing gasket tape from the Home Depot store; it has worked remarkably well after I initially spoke with a repairer in Central Florida who uses it exclusively. 
SimplePortal 2.3.5 © 2008-2012, SimplePortal