Melodeon.net Forums

Discussions => Recordings and Videos => Topic started by: smiley on October 11, 2011, 12:39:37 AM

Title: Audacity query - removing a stereo channel
Post by: smiley on October 11, 2011, 12:39:37 AM
I've recorded a tune using Audacity and I want to edit or delete the stereo channel that has my unimaginative 'chugging' bass, so I'm left with only the treble side being audible. I can't find a way to select just one stereo channel in a track and leave the other channel alone - is there a way to do this? Recording the tune again without playing any left hand is an option but its hard not to keep tapping the bass buttons as I'm playing.
Title: Re: Audacity query - removing a stereo channel
Post by: Bill Young on October 11, 2011, 07:55:31 AM
At the top of the panel to the left of the tracks there is a drop-down menu. This will give an option of "Split stereo track". That gives another track panel to the left of the lower track. You can then use the "X" at the top left of a track panel to remove that track.
In the Audacity Ref manual, it's under "Tracks" - "Track Control Panel" - "Track Drop-down Menu".
Title: Re: Audacity query - removing a stereo channel
Post by: Anahata on October 11, 2011, 08:07:55 AM
All of what Bill says is true; as a further step, if your treble only side is now too bass light you can keep the two split tracks, reduce the level of the bass end one (the track control panel has a volume control) and pan (also on track control panel)  each between L and R until the result is balanced.

This technique is also useful if you close mic left and right sides and want to move both closer to centre so it doesn't sound like a 15 foot wide accordion, or if you've used a close mic on two instruments and don't want them coming out one per speaker.

Basically turning Audacity into something more like a proper two channel mixer.

When you export, you'll get a proper stereo .WAV or .MP3 as you heard it.
Title: Re: Audacity query - removing a stereo channel
Post by: smiley on October 13, 2011, 11:29:36 AM
Thanks for the help - sorted out my problem nicely.
SimplePortal 2.3.5 © 2008-2012, SimplePortal