Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Rob2Hook on October 13, 2011, 12:39:13 PM

Title: Clean/refurb a wooden box
Post by: Rob2Hook on October 13, 2011, 12:39:13 PM
I was wondering whether anyone can advise what finish is used on Castagnari cases?  The finish of the padouk case is semi-matt except where contact with my hands has created a high gloss human varnish.  Also, where minor scratching has occured, the colour is much lighter - is it stained?

I am about to experiment with rubbing it over with some Deks Olje D1 to see whether it takes off the "human varnish" and brings back the colour to the scratches - starting with the back of the keyboard, of course.  Has anyone successfully refurbished the finish and, if so, how?

Rob.
Title: Re: Clean/refurb a wooden box
Post by: rees on October 13, 2011, 01:09:38 PM
I believe it's a spray on plastic coating. They do them in large batches.

The wood is not stained.

I've had some success with Liberon Finishing Oil. You can build it up in several coats until a near match is obtained.
It dries rock hard and polishes up nicely.
Title: Re: Clean/refurb a wooden box
Post by: waltzman on October 13, 2011, 02:39:15 PM
The surface of padouk wood will oxidize and turn from the orange color of freshly exposed wood to a dark brown.  If you scratch off or sand off the brown there will be a light orange under it....until it oxidizes also.
Title: Re: Clean/refurb a wooden box
Post by: rees on October 13, 2011, 06:36:49 PM
The surface of padouk wood will oxidize and turn from the orange color of freshly exposed wood to a dark brown.  If you scratch off or sand off the brown there will be a light orange under it....until it oxidizes also.

Indeed it's true. The Benny belonging to Bob Ellis of this parish has changed from a very bright orangey red to a dark plummy brown.
SimplePortal 2.3.5 © 2008-2012, SimplePortal