Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: leeby on October 14, 2011, 08:54:05 AM
-
Hi all, I've just come into possession of an old Tommy. It's number 59....!
Any ideas how I can approximate the age of it? It's in surprisingly great condition.
Has the diamond bellows design and seems to be in walnut (I think).
Thanks
Lee
-
Not sure the 59 has any relevance to the age. I believe the numbers (in pencil inside the casework) are used on a per batch basis to keep the bits together so there will be many 59s. The diamond shape bellows taping does show it has some age but not sure when they changed to the new U* shaped taping. My Tommy had the diamond pattern and that was 1980ish and was numbered 24.
*I have just realised after looking at some pictures the U shape in the taping is probably actually a C and need to be viewed with the box on its feet.
-
*I have just realised after looking at some pictures the U shape in the taping is probably actually a C and need to be viewed with the box on its feet.
Congratulations, Lester!
(summat to do with the action of gravity on small-denomination coins of the realm, I think ;) )
Similar idea with the zig-zag pattern on Saltarelle bellows too......
-
Some Castagnaris have the production date had written on the treble end under the gril.
-
I have just realised after looking at some pictures the U shape in the taping is probably actually a C and need to be viewed with the box on its feet.
Never twigged that!
-
Duh!
-
Thanks guys... Yes unfortunately there's no other scribbles.
If you can measure ages through the weight of fluff inside, I'd reckon it's mid 80s at a guess... Back in the days of very nice handmade reeds though - photo of reed block attached.
-
Don't want to disappoint, but, every Castagnari I've looked inside has fatto a Mano stamped on the reedblocks but has tipo a mano reeds. It is the woodwork that is "fatto a mano" by Castagnari.
-
They've been using Antonelli (now VA - Voci Armoniche) Tipo a Mano reeds ever since I can remember.
-
ever since I can remember.
Really since that long ago...... ;D
-
That's what mine says too.
-
Don't want to disappoint, but, every Castagnari I've looked inside has fatto a Mano stamped on the reedblocks but has tipo a mano reeds. It is the woodwork that is "fatto a mano" by Castagnari.
Are the models that have the machine grade reeds in them stamped "fatto a mano" also?
-
I believe so, yes. My Nik, which would be expected to have what they refer to as Super Dural Reeds, has "hand made" stamped on the reed blocks.
Rob.
-
Hand made. Made by a pair of hands using a machine, no doubt.
My favourite bit of advertising fakery was on a packet of crisps. "Made with real ingredients". As opposed to those pixie dust and powdered unicorn horn fairy ingredients people use. Clever use of the word "real" to imply "natural" whereas in fact all ingredients are "real".
On the topic of crisps, here's a trick. Find a British crisp packet. I bet you the best before date on it is a Saturday.
-
Hand made. Made by a pair of hands using a machine, no doubt.
My favourite bit of advertising fakery was on a packet of crisps.
FYI the amount of time using machinery to make a single melodeon pales in comparison with the amount of time spent with "hand" processes, even if the builder uses a significant amount of automated milling equipment. No fakery there.
-
My point exactly. I don't use my fingers to make a shawl - I use tools called knitting needles - but I'd still call it hand made. I was merely pointing out that an awful lot of things marked as "hand made" aren't actually made with just people's hands. :) The crisps analogy was just that. Just because ingredients are marked as "real" doesn't mean all other crisps aren't "real". Just because your box has "hand made" stamped on the inside doesn't make that special as such. It seems that most of them are "hand made" to a given extent anyway.
-
I read somewhere that "hand polished" in the furniture trade at one time meant exactly that. The final buffing with some kind of powdered polishing compound was actually done with the bare hand.
-
I think a lot of people get carried away with this "hand made" label; what it actually means is that the product is not mass-produced by automated machinery. It's individually made with care, one piece at a time, using hand tools or hand-operated machine tools as appropriate and then usually assembled and finished by human hands rather than by a robot. It would be patently ridiculous to expect "hand-made" to mean "made solely by hand - no tools involved". In another life I made a (very modest) living making hand-made marionettes; they were each unique, carefully hand-finished and made entirely from raw materials by my wife and myself. I used a wide range of hand-tools, but I also used a drill press, a planer-thicknesser, a lathe, a bandsaw, a belt-sander, and various other power tools; the clothes were made with the aid of a sewing-machine or two. But they were in every sense of the word "hand-made" because each cut, hole or stitch was guided directly by our own hands. I studied violin-making for 3 years, and people often used to say things like "Stradivari never used a bandsaw"; no he didn't, but only because they hadn't been invented. If he had been able to see one, I'm sure he would have said (in archaic Italian!) "Now I could really make use of one of those - where can I get one?"
-
There have been some very interesting works of fantasy and steampunk based on the old "what would Babbage/Da Vinci/Brunel been able to do if they'd had access to computers/carbon fibre/electron microscopy".
An electric Strad.... Stratocaster, perhaps.
http://en.wikipedia.org/wiki/The_Difference_Engine
(By computers I of course know that Babbage pretty much designed one - he was let down by the fact that the technology did not exist at the time to actually make his idea work, although it was sound. The book linked above goes into what might have happened had he succeeded).
-
An electric Strad.... Stratocaster, perhaps.
That'll be a Stradocaster, then......now THERE'S an idea!