Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: val huzzard on October 25, 2011, 04:55:01 PM
-
I'm not sure why, but my 5 year old Bompezzo Jupiter seems to be falling apart. The second time in a year I have a wood problem. Last time it was three cracks along the wood grain. I got them fixed by Helmut Rheingans who did a lovely job .
Now there is a split at a join on the top of the treble end, right on a corner. I could go back to Helmut, but just wondered if anyone has any advice on the type of glue that would be best to use. It would involve making a clamp I think as the corner is rounded. I may have ago myself .
I have e mailed the Bompezzo factory for advice but they are rubbish at replying to e mails- and I sent it in Italian...
I am not over precious about my melodeon, but generally look after it ok. I have had quite a few different boxes over the years, but this sort of thing has never happened before.
Any advice anyone?
-
My favourite wood glue for jobs like this is Titebond II, which I used earlier this year for exactly this repair on my Saltarelle. It's easy to use straight from the bottle, has enough open time to manouevre the parts into contact, a quick grab and a fairly quick drying time. Surplus glue can be wiped off while still wet with a damp cloth. The glue itself dries to a pale yellow and is semi-gap-filling. With my Saltarelle repair I was able to remove the cramps after about 40 minutes. Full strength is achieved after 12 hours or so, The repaired joint has remained totally stable.
-
I've come to really like fish glue for many applications, including this one. It dries hard, has a very quick tack, can be warmed up after which it wicks down into the crack very well, dries relatively clear, and actually seems to help pull a joint together as it dries (clamping still recommended), making joints with less of a glue line.