Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: derekh on October 29, 2011, 01:34:07 PM

Title: changing reeds
Post by: derekh on October 29, 2011, 01:34:07 PM
im changeing the accidentals for low notes on a dg honher where can i get  the nessessary reeds
Title: Re: changing reeds
Post by: Steve_freereeder on October 29, 2011, 02:19:50 PM
Try Charlie Marshall:
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Plates.html
Title: Re: changing reeds
Post by: Anahata on October 29, 2011, 02:54:22 PM
There may be a bit more to it than that, as the reeds for the low notes will be much bigger than the accidental reeds. My Pokerwork's been modified that way, but I've never looked to see how it was done...

...but CGM would surely be the place to go.
Title: Re: changing reeds
Post by: rees on October 29, 2011, 03:22:43 PM
The reed blocks will have originally been cut with a bigger chamber to fit low notes. Sometimes Hohner fit a reed-plate that is much longer than the small accidental reed to fit this chamber. If they use a smaller reed-plate they glue a little block of wood in the chamber to fill the gap. It's easy enough to remove this with a chisel thus enlarging the chamber.

Charlie is the man.
Title: Re: changing reeds
Post by: waltzman on October 29, 2011, 03:54:37 PM
The reed blocks will have originally been cut with a bigger chamber to fit low notes. Sometimes Hohner fit a reed-plate that is much longer than the small accidental reed to fit this chamber. If they use a smaller reed-plate they glue a little block of wood in the chamber to fill the gap. It's easy enough to remove this with a chisel thus enlarging the chamber.

Charlie is the man.

I learned from the Hohner Tech in the US that the reed blocks for Pokerwork/Erica models are all exactly the same regardless of key or low notes or accidentals.  The chambers are just blocked in for the smaller reeds as described above.  This makes perfect sense from an efficiency of production standpoint but somehow it never occurred to me until the tech pointed it out.
Title: Re: changing reeds
Post by: derekh on October 30, 2011, 11:11:40 AM
thanks for help
Title: Re: changing reeds
Post by: Martyn on October 30, 2011, 12:34:37 PM


Charlie is the man.

I'm pretty sure Charlie only supplies sets of Hohner reeds and doesn't sell them singly.

Martyn
Title: Re: changing reeds
Post by: Graham Spencer on October 31, 2011, 05:08:42 AM


Charlie is the man.

I'm pretty sure Charlie only supplies sets of Hohner reeds and doesn't sell them singly.

Martyn

According to his website, that's right - but it can't hurt to ask.
SimplePortal 2.3.5 © 2008-2012, SimplePortal