Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Waltham on August 30, 2008, 10:21:27 PM

Title: Pokerwork History
Post by: Waltham on August 30, 2008, 10:21:27 PM
The story so far: over in the melodeon history sites (http://forum.melodeon.net/index.php?topic=807.0) thread folks are talking about putting the histories of different melodeons in a database/wiki/virtual-rolodex, the details of which are stll being thrashed out.  One particularly suave, handsome and debonair forum member suggested, as a starting point, trying to gather together everything we know about the history of the Hohner Pokerwork in one thread. This is that thread. 

As it happens, Shy Talk already gave us a kick start in the FAQ thread (http://forum.melodeon.net/index.php?topic=787.0) by giving the following answer to my proposed FAQ "How do I know how old my pokerwork is?":
Quote
The "lyre-ended" wood keyboard went in the late fifties, along with candlewick bellows gaskets. The early  "rounded" Erica & Double Ray initially also had wooden keyboards with a transverse groove to locate the edge of a flat recessed grille. Like the Corona their keyboards went plastic  along with lipped grilles in the early sixties. Obviously this was because injection was cheaper than machining and two mouldings sufficed for several models. (Incidentally, apart from the "Made in Germany" transfer on the back of of the board  you can distinguish Chinese from German because the finish is duller on the Chinese one. Mind it could be a replacement, that is why you should never take Tunings, marked on  straps and keyboards as gospel when buying unseen)

There's plenty more to sort out: can we tie these approximate dates to particular years of manufacture?  Can we get photos of the different models and their distinctive features?  What about the early pressed wood honey-coloured ones that sometimes come up on e-beigh?   Were any ever supplied new with straps (I know mine, german made with plastic keyboard, wasn't)?  When did the thumb strap fixing go from bolts to rivets?  What keys were they supplied in at each stage of their development?

Perhaps I should clarify, since Pokerwork refers to the finish/pattern and Hohner made other instruments with this finish that this thread is about the two row "Vienna Accordion".

I've got a few scraps of information I'll try to dig out but I'm sure plenty of people here have lots more...
Title: Re: Pokerwork History
Post by: triskel on August 31, 2008, 11:05:59 PM
The History of Hohner pokerwork models actually goes back to instruments produced by Koch (one of the firms that Hohner took over) in the 1920s, and perhaps earlier. Hohner themselves produced a variety of beech-wood pokerworks in the 1930s, and more (including most of the "honey-coloured" ones you mention) between 1947-55.

The black and gold 2915 pokerwork first appeared in 1955, as did the modern Erica & Double Ray models with which it has had much in common.
Title: Re: Pokerwork History
Post by: an bosca ceoil on August 31, 2008, 11:23:49 PM
The story so far: over in the melodeon history sites (http://forum.melodeon.net/index.php?topic=807.0) thread folks are talking about putting the histories of different melodeons in a database/wiki/virtual-rolodex, the details of which are stll being thrashed out.  One particularly suave, handsome and debonair forum member suggested, as a starting point, trying to gather together everything we know about the history of the Hohner Pokerwork in one thread. This is that thread. 

Can we get photos of the different models and their distinctive features?  What about the early pressed wood honey-coloured ones that sometimes come up on e-beigh?   Were any ever supplied new with straps (I know mine, german made with plastic keyboard, wasn't)?  When did the thumb strap fixing go from bolts to rivets?  What keys were they supplied in at each stage of their development?

Perhaps I should clarify, since Pokerwork refers to the finish/pattern and Hohner made other instruments with this finish that this thread is about the two row "Vienna Accordion".

I've got a few scraps of information I'll try to dig out but I'm sure plenty of people here have lots more...

Best responding to this thread because I cannnot understand a word on the "History" channel!
I think you will be hard pushed to place precise dates on many of Hohners "low end" models.
 Unless someone has dated catalogue material showing them as New Models the subject will be open to a lot of conjecture. At one time, for a fee, Hohner were often able to give specific manufacture dates for instruments bearing a Serial Number, but I think Liliputs were the lowest rank to have one.
According to "Ewig jung trotz vieler Falten", colloquialised to "History Unfolds", the first "pokerworks" were about in in 1914 but not as we now recognise them.
They are listed  as the "Holzbrand" and, apart from the grille, are very similar to the Hohner "Koch" of 1929/31. They share identical internals and keyboards, only the embossed patterns of the casings differing, the Koch having traditional roses and mitred corners without metal cappings and two less bellow folds.
 So far as I see the only difference I see between these and the "Honey Coloured " ones that you mention is that the latter were fitted with todays  current small framed bellows and were embossed with the early Marca Registrada/Hohner Accordeon/ "Kalbe" Anchor logo and "Shell Pattern, the same as early black and gold models.
Two rows were at that time available in 5th apart tunings from GC through CF and one rows in B C D & G .
Although the term Pokerwork is now the norm I have never seen the word actually used by Hohner, only Holzbrand and Goldbrand??
I have never fathomed out exactly when the equivalent celluloid "Toilet seat" versions were first produced I know they were about in the early fifties, even as early Double Rays.
Apart from the models mentioned there were a lot of Hybrids produced. I have one black/ gold two row fitted with a stepped keyboard and a "retro" wooden grille and another with "Nostalgie" piano type levers,  MOP buttons and wooden grille as well as "Toffee Coloured" with fretwork grille.
I cannot help wondering whether such oddballs were not produced for specific dealer outlets much the same as todays special lines at Aldi.
If ever the history project ever gets off the ground I would be happy to provide pictures of all the models I have, so long as someone tells me how to!!
Regards, Bruce
BTW  I think strap brackets were only fitted by the dealers (pity some of them had little idea!) and that original thumb sraps are always rivetted onto plastic & late wooden  keyboards/screwed onto early wooden ones.  
Title: Re: Pokerwork History
Post by: Ebor_fiddler on August 31, 2008, 11:42:03 PM
The word "Holzbrand" translates into English as "Pokerwork" (literally "burned wood").  :-*
Title: Re: Pokerwork History
Post by: an bosca ceoil on August 31, 2008, 11:50:48 PM
[quote author=triskel link=topic=823.msg6791#msg6791 date=1220220359

The black and gold 2915 pokerwork first appeared in 1955, as did the modern Erica & Double Ray models with which it has had much in common.
[/quote]

True, the 2915 was introduced in 1955 but there were already black and gold ones about prior to that (Forbes of Dundee listed them in their 1953 catalogue) many of them have vinyl valves which would still place them post-war.
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 01, 2008, 12:14:53 AM
The word "Holzbrand" translates into English as "Pokerwork" (literally "burned wood").  :-*

And "Ewig jung trotz vieler Falter" translates literally, I think, into "Eternally young despite the wrinkles" - just like me! :)
My point was that the current "Pokerworks" derived the nickname from their Holzbrandt ancestor whilst Hohner called them Goldbrandtmodell.
Similarly "presswood" is a more accurate description for the early ones where the pattern stands proud of the background rather than recessed into it.
Title: Re: Pokerwork History
Post by: Malcolm Clapp on September 02, 2008, 01:00:50 PM
Obvious questions re. pokerwork models:

1. Why is the modern style pokerwork designated model #2815 in the USA and #2915 in UK and elsewhere? Is there a difference?

2. Marca Registrada. Roughly translated as "Trade Mark" I assume, but why in (?)Spanish/Portuguese and not in German? Could it be that this design was originally intended for the South American market?

The blond pressed wood pokerworks are quite commonly found in Australia. According to the former longtime Hohner agent in Australia, Kurt Jacob, he once told me that he had a large shipment of both single row (#1140) and double row (#2915) models with this finish that arrived just before the outbreak of WWll (1939). These were soon removed from the shelves, not to reappear for sale until after the end of the war.

Of a number of these shown to me over the years, several had retail receipts from the late 1940s, but Kurt insisted that they were built prewar. The design of these is of the latest blond Hohners I have seen, the same as in some postwar Hohner catalogues before the c1955 (?) introduction of the black and gold pokerwork.

Going back to my question 2. above, Kurt also told me that he sometimes received shipments from Germany incorrectly consigned and meant for the Hohner agent in Argentina. If  Marca Regisrada models had indeed been intended for the South American market, maybe that's why so many of them are found in Australia.

Or maybe some confusion existed at the Hohner export department about "countries with long names beginning with A"....     ;D

Interestingly, Kurt Jacob worked at the Hohner factory for some years before being sent to Australia in 1937 as the Hohner agent. Apart from a period of internment during WWll, he was the Hohner agent here until his retirement in the early 1980s. I had many interesting conversations with him prior to his passing, and one of my biggest regrets is that I never had a tape running at the time. He was a mine of information about Hohner, harmonicas as well as accordions, and probably one of the last survivors of the prewar Hohner staff.


Title: Re: Pokerwork History
Post by: BruceHenderson on September 02, 2008, 01:55:49 PM
    Re: "Marca Registrada"  As part of import restrictions over the 20th Century, local requirements for marking changed frequently (actually, these requirements went well back into the 1800's but were more prominent in the 1900's).  There are a number of learned texts on locating and dating items by the form of the marking of "Made in", "TM/MR" (mostly linked to antiques and collectibles).  But I'm pretty sure that during the mid-1900's, most countries required a marking of Trade Marks or Patents but most English speaking countried did not specify the language but Spanish speaking countries required Spanish.  Thus, the Spanish form would satisfy the more restrictive Spanish requirement and be allowed by English speaking countries, so it was often used worldwide.

    I'm told that many companies did alter the wording based on the country of destination (particularly the larger and more active exporters, and knowing Hohner's long base of exports, it wouldn't surprize me if Hohner did this), so all this doesn't help you at all, does it??????  (I can only guess - and it would be a WAIG - but I'm guessing that anything with only a "Marca Registrada" mark was actually earmarked by Hohner for export to a Spanish speaking country ... but, who knows, especially with the turmoil of manufacture and international trade just pre- and post-War.)

    Items originating from Germany may be often classified by the wording of origin.  Most items prior to WWI were isted by state (i.e, "Made in Saxony", "Made in Bavaria"), then after WWI there were wordings to indicate Weimar republic and the 1933-45 Reich (although I'm not sure that there were different wordings for these two), and post WWII to about 1991, you had labels for West and East Germany (which often bears because Klingenthal was in East Germany/ DDR) but just to confuse things, some companies (especially in West Germany) just used the phrase "Made in Germany".  And, of course, with the advent of transfers and painted labels versus the engraved metal tags used earler, it's not uncommon to find these markings worn away or removed on older items.  Any other labels besides the "Marca Registrada" label, Malcolm?

   Sometimes all this helps, especially for someone who knows much more about it than I do.
Title: Re: Pokerwork History
Post by: BruceHenderson on September 02, 2008, 02:04:11 PM
    Oh, and just to muddy the waters, an acquaintance of mine near to Washington DC USA plays a beautiful blond-wood Hohner.  He says that he bought it as a "Pokerwork" in OK playing nick but shabby appearance.  He has no idea of it's previous owners or locations. But he found that the "Pokerwork" exterior was in such bad shape that he felt it best to remove black and gold as you'd remove plastic transfers and underneath he found the clear blond wood with impressed (or, maybe better described "expressed") and painted floral patterns.  In terms of grille, fingerboard, buttons and mechanics, etc., this instrument appears to be identical to other Pokerworks (but there may be details that a more experienced eye would pick up).

    I'm pretty sure that any company name, trade mark, country of origin and other labels were removed in this process.

    I have no idea if this was common but it seemed pretty unusual to me first time I saw it.

BH, NC USA
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 03, 2008, 12:35:42 AM
IN RESPONSE TO PRECEDING POSTS BY MALCOM & THE OTHER  ;)BRUCE
As I have said before, a lot of opinions are now bound to be conjecture and "educated" guesswork and it is indeed a pity that those who knew the facts are no longer about.
I do not think that the " Marca Registrada " was solely for instruments destined for Spanish countries, simply because the other lettering on the logo reads "Made in Germany"
(Strange that they were marking the harmonikas in English & French)
There are at least two variations of embossing on "Blonde" instruments.
 One pattern resembles a ribbon with lilies on it and a horizontal HOHNER with anchors either side and "M/R" & "M/I/G" above & below. This design is impressed and identical to the first Holzbrands which might indicate it to be earlier than -
A second design  which is in relief and identical to that of pre 1955 black & gold models i.e. two bands of "shells"?/ commas"? either side of a "diamond" band. The logo is HOHNER- "M/R" one large anchor "M/I/G" ACCORDEON at right angle to the bellows
(Apparently the "Kalbe" anchor belonged to a firm of that name acquired by Hohner so did the Marca Registrada apply to that logo rather than the instrument?)
The embossing design on the keyboard is  identical on all  "blonde", Holzbrand and Hohner Kochs and also features on some black lacquered ones. Surprisingly it is also found on some "real" pre-takeover Kochs which might indicate either that the work was subbed out or that there was some cooperation between the firms before they merged.
As to whether some "Blondes " are just prewar - makes me wonder why they stopped putting Original Hohner on the keyboard reverse and did not mark them DRP like the Club I ,Piccola etc.
Perhaps by this time the mention of the Third Reich was not so conducive to sales in some countries
I thought Bruce might have mentioned the "Art Deco" (or is it "Art Nouveau")  ones - rather flash celluloid coated variants that were probably intended for the US market and do not seem to crop up elsewhere. When was Art Deco, pre or postwar?
Regards, Bruce
Title: Re: Pokerwork History
Post by: Pete Dunk on September 03, 2008, 01:05:01 AM
When was Art Deco, pre or postwar?
Regards, Bruce
As far as I understand it Art Deco was pre WW2 and very much of the late 1920s and early 1930s but there again I'm renowned for being entirely wrong ...  ;)
Title: Re: Pokerwork History
Post by: Theo on September 03, 2008, 08:33:05 AM
Great information, thanks for all the contributions.

What will be really helpful when we get all this in a database is to have all the examples illustrated with photos.  I'm familiar with all the designs being discussed, but its still hard to follow all the details and re;ate them to each other.
Title: Re: Pokerwork History
Post by: Martin J on September 03, 2008, 07:07:59 PM
Thanks for this thread, I've found it fascinating. I'm sorry you feel the 'History Thread' is gobaldy gook at the moment.  Perhaps you'll feel differently about it once the talking is over and a decent programme is in place so that you can look up items such as this thread and it's various details without having to rack your brains as to where and when you saw something and then have to trawl for it.

You are quite right in that it may never happen but I would rather try and fail than not try at all.  Please ignore the 'techy' stuff until it's working and then perhaps if asked you will be kind enough to supply such information that you have on a casual basis to help grow the information base.  I'm not techy but I am asking those who are to help build the tool which all of you on this thread along with others can update and use.

At the end of the day though, it will be Theo we have to thank for providing the umbrella under which it can work and the techies who make it work.

Martin
Title: Re: Pokerwork History
Post by: triskel on September 07, 2008, 06:38:32 AM
According to "Ewig jung trotz vieler Falten", colloquialised to "History Unfolds", the first "pokerworks" were about in in 1914 but not as we now recognise them.
They are listed  as the "Holzbrand" and, apart from the grille, are very similar to the Hohner "Koch" of 1929/31. They share identical internals and keyboards, only the embossed patterns of the casings differing, the Koch having traditional roses and mitred corners without metal cappings and two less bellow folds.
... Although the term Pokerwork is now the norm I have never seen the word actually used by Hohner, only Holzbrand and Goldbrand??

Frankly I'm astonished at how badly wrong the book is about the instrument in those photos, which looks like a 1929/31 model because that's just what it is, displaying all the features of Hohner's "Patent applied for" of that era - I know exactly how they're made because I've got one:

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100012.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100012.jpg)

... and I've got the catalogue that describes these new features!

The model is one of Hohner's Series 7200, and the correct catalogue designation (circa 1929-30) is "No. 7215/21/8", described as:

"Polished natural case with beautiful poker work designs (anemony pattern) Hohner keyboard, interior locking device, single plates with steel or bronze reeds, substantial bellows, bellow frames covered with cloth and leather straps."

and
 
"Instruments with the numbers 21/8 and 21/12 of the above series are also supplied in the colours:
black-gold with additional mark "G"
or walnut-gold with additional mark "NG"
In addition these two types will be supplied with octave tuning."

Whilst the old Koch "Burnt-Wood" (as they described them in their catalogue) accordions were rather fancier, like this one that I have (the reeds bearing Koch's mark, not Hohner's):

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100162.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100162.jpg)

Quote
So far as I see the only difference I see between these and the "Honey Coloured " ones that you mention is that the latter were fitted with todays  current small framed bellows and were embossed with the early Marca Registrada/Hohner Accordeon/ "Kalbe" Anchor logo and "Shell Pattern, the same as early black and gold models.

The origins of those models are very apparent in similar designs also shown in the 1929-30 catalogue, all with the small-framed bellows - "No. 7665/21/8" has the same "blue bell pattern" poker work design and Stradella corners, already available in optional black-gold, whilst the "modern" metal grille can be seen on others such as "No. 3515 1/2". The same catalogue also shows single-row melodeons with the same "star pattern" poker work on the sides as today's ones.

Quote
I have never fathomed out exactly when the equivalent celluloid "Toilet seat" versions were first produced I know they were about in the early fifties, even as early Double Rays.

Gold, silver, white, black, blue, pink or green "Celluloid veneer instruments with Hohner keyboard" appear as early as the 1929-30 catalogue, as model Nos. 120 - 180.

Quote
BTW  I think strap brackets were only fitted by the dealers ...  

As one of "the dealers" for 35 years, I can confirm that that was the case.

edited photos
Title: Re: Pokerwork History
Post by: Malcolm Clapp on September 07, 2008, 03:49:04 PM

Quote
I have never fathomed out exactly when the equivalent celluloid "Toilet seat" versions were first produced I know they were about in the early fifties, even as early Double Rays.

Gold, silver, white, black, blue, pink or green "Celluloid veneer instruments with Hohner keyboard" appear as early as the 1929-30 catalogue, as model Nos. 120 - 180.



I assume you are referring to those of the same squarish shape as the 2915.

Grey and pink seem to be the most commonplace of these. I have one of each currently awaiting attention in my workshop....Original waxed H aluminium reedplates in both, leather valved.

So am I correct in thinking that these were replaced in the range by the more rounded shape of the Erica, perhaps to allow a better shape for easier (and apparently more permanent!) application of the celluloid?

If so, when would this dramatic change have taken place?
Title: Re: Pokerwork History
Post by: triskel on September 07, 2008, 04:09:31 PM
I assume you are referring to those of the same squarish shape as the 2915.

With Stradella corners, yes.

Quote
So am I correct in thinking that these were replaced in the range by the more rounded shape of the Erica, perhaps to allow a better shape for easier (and apparently more permanent!) application of the celluloid?

If so, when would this dramatic change have taken place?

"Streamlining", typically of planes, cars and railway engines became "all the rage" in the 1930s, so from about 1937 onwards accordion makers started to follow suit, lead by the Italians and the Americans, but Hohner didn't bring out their more "streamlined" Erica model until 1955, though there were some somewhat more rounded Art Deco models just before the War.

However, it's more difficult to apply the celluloid to a rounded shape, not easier.
Title: Re: Pokerwork History
Post by: triskel on September 07, 2008, 04:23:03 PM
The black and gold 2915 pokerwork first appeared in 1955, as did the modern Erica & Double Ray models with which it has had much in common.

True, the 2915 was introduced in 1955 but there were already black and gold ones about prior to that (Forbes of Dundee listed them in their 1953 catalogue) ...

Which is why I was very careful in my choice of words, being in England at the time, and a long way from my catalogue collection.   ;D

But that 1953 Forbes one sounds very interesting, I'd especially like to see any Paolo Soprani models in it. (I could be persuaded to "swap" some photocopies...  ;))
Title: Re: Pokerwork History
Post by: Malcolm Clapp on September 07, 2008, 05:25:05 PM


Quote
So am I correct in thinking that these were replaced in the range by the more rounded shape of the Erica, perhaps to allow a better shape for easier (and apparently more permanent!) application of the celluloid?

If so, when would this dramatic change have taken place?

"Streamlining", typically of planes, cars and railway engines became "all the rage" in the 1930s, so from about 1937 onwards accordion makers started to follow suit, lead by the Italians and the Americans, but Hohner didn't bring out their more "streamlined" Erica model until 1955, though there were some somewhat more rounded Art Deco models just before the War.
 

Getting slightly off topic, but assuming that Triskel is correct about the Erica shape being made no earlier than 1955, can any one (without upsetting any obvious sensitivities) explain the swastika motif found on some early Erica shaped instruments? (Also seen on some celluloid covered square shaped melodeons.)

I realise that Nazi Germany did not invent, nor have sole use of the swastika, but I would have thought that placing a swastika on a product exported from Germany at that time may have caused some concerns, or even lost sales.

I have occasionally been asked by owners about removal of this symbol from their melodeon....

(Apologies if this post offends.)

Title: Re: Pokerwork History
Post by: triskel on September 07, 2008, 06:40:38 PM
Getting slightly off topic, but assuming that Triskel is correct about the Erica shape being made no earlier than 1955, can any one (without upsetting any obvious sensitivities) explain the swastika motif found on some early Erica shaped instruments? (Also seen on some celluloid covered square shaped melodeons.)

Malcolm,

Well firstly, it's not me, but Hohner who say that the Erica was introduced in 1955, though I've also seen them advertised and been told that by people who bought them then.   ;)

Also, "Black Dots" were made long before that time, though not in the rounded shape. The "Double-Ray Black Dot Accordion" was originally built as a square-shaped black wooden instrument, specially for Forbes of Dundee, and announced in March 1934 (though not available until that April). The earliest illustrated advertisements (May 1934) show that the symbol in question (or should that read "questionable symbol"?) was part of the design from the beginning.

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Double-Ray.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Double-Ray.jpg)          (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/double-ray8.jpg)

But that was also the year in which Hohner was forced to adopt the Fuehrersprinzip and factory life became increasingly politicised, whilst the firm was criticised, around then, by the Nazis for "trivialising" the swastika by putting it on some of their harmonicas...  :o

It only disappeared from the new Black-Dots relatively recently.

Stephen C.

edited photo
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 07, 2008, 11:17:33 PM
I did say that only original catalogues would enable accurate dating and yours would seem to provide a lot of the answers. Makes a lot of sense because the "Holzbrand" pictured in the book I quoted just did not "look" 1914.  Goodness knows where they arrived at that date unless they took the owners advice without question.
Presumably the "Patent applied for" refers to the introduction of the still current pressed steel/plastic button  keyboard action?? and I would guess that the G and NG stood for Goldbrand and NussGoldbrand.
Interesting to find out that what I thought were lilies are in fact anemones, should have invested in the Observers book of flowers!
Despite the information you gave, I am still wondering about one model that I have. It is to all intents a "pokerwork" but has an oddball stepped keyboard,wood & wire levers, MOP buttons and a large "push in" air button. Perhaps you will tell me how to get a picture from PC onto these pages and see if you have any ideas about it?
Do not get excited about the Forbes catalogue - I only have a couple of pages from it, relating mainly to Black Dot/ Trichord plus a cople of typewritten stock lists (mentions a s/h Soprani four row in B/C/C#D for £35 !) but if you want copes you are more than welcome.
Regarding the Swastikas - as you say they were on all Black Dots, albeit in a stylized form, to fill the gap under the "Double Ray" but I cannot recall seeing them on any Ericas.
Just remembered - that description mentioned an internal locking device - have you seen one with it?
Regards, Bruce
Title: Re: Pokerwork History
Post by: EeeJay on September 07, 2008, 11:30:20 PM
But that was also the year in which Hohner was forced to adopt the Fuehrersprinzip and factory life became increasingly politicised, whilst the firm was criticised, around then, by the Nazis for "trivialising" the swastika by putting it on some of their harmonicas...  :o

Then again - in the late 1940's there were German and Austrian laws bought in expressly forbidding the use of particular symbols, devices, scripts, words, flags, Nazi salute, etc. etc... recent thwarted attempts to introduce this as pan-EU law too... So why/how did the postwar Double Ray get round this strict proscription? And why the heck put the swastika on an item intended solely for the English speaking market, in the decades after WW2?

It only disappeared from the new Black-Dots relatively recently.

Not surprised that the Chinese ditched the swastika on the Double Ray though... it's regarded as an important symbol of the Falun Gong movement... (http://www.falundafa.org/intro/0-falun.htm) which goes back waaaay longer than the monorchic corporal... (http://en.wikipedia.org/wiki/Hitler_Has_Only_Got_One_Ball#Did_Hitler_really_have_only_one_testicle.3F) ;D

Ed J
Title: Re: Pokerwork History
Post by: triskel on September 08, 2008, 02:05:39 AM
I did say that only original catalogues would enable accurate dating and yours would seem to provide a lot of the answers.


Bruce,

The one I'm quoting from at the moment is an extremely informative 72-page one - if only there were more like it! It is "Catalogue No. 700 of Hohner, Koch, Kalbe, Gessner and Regal Accordeons", and since it includes Koch (officially taken over by Hohner on 1st January 1929), and the instruments described in it are an intriguing mix of "old-style" models from the '20s, and "modern" ones from the '30s, I'm dating it circa 1929-30, though I'll see if I can get confirmation of that.

Quote
Makes a lot of sense because the "Holzbrand" pictured in the book I quoted just did not "look" 1914.  Goodness knows where they arrived at that date unless they took the owners advice without question.

That may well be the case...

Quote
Presumably the "Patent applied for" refers to the introduction of the still current pressed steel/plastic button keyboard action??

That's right:

"A new and accurate mechanism for the treble and bass parts which is of tremendous durability and absolutely unaffected by weather influences. Very solid construction on both sides, noiseless and almost frictionless working levers, absolutely compact shutting with exceptionally good valve opening capacity. It is quite impossible for the keys to scrape against each other or to jam.

This new type of construction is a far better combination than any previous one for the open and closed keyboard.

In this new construction the valve and key levers are made of one piece of metal, each lever contains two holes for the axle, this rests in a precise foundation while the simplicity of the mechanism is a great advantage for accurate and faultless working. The springs and valves are constructed and placed in such a way that they can work to their full advantage and can neither shift their position nor fall off."

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100032.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100032.jpg)          (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100012-1.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100012-1.jpg)

"As a further patent (applied for) we have brought out a new cover fastener and interior locking device.

Through this invention the bass as well as the treble cover may be detached without the necessity of unscrewing the holding screws. The fastening hooks serve the purpose of feet rests for the accordeons as well as clasps for securing the cover, scratching or damaging of the cover can not be caused through opening or closing the hooks.

The interior shutting device.

All accordeons of the Vienna style with poker work designs are fitted with modern and practical adjustable interior shutting devices. This must not be confused with the already-known cheap wooden screw shutting apparatus. After detaching the cover a screwdriver can be inserted through the perforated hand strap and the screw can either be losened [sic] or tightened."

Quote
and I would guess that the G and NG stood for Goldbrand and NussGoldbrand.

I expect so.

Quote
Despite the information you gave, I am still wondering about one model that I have. It is to all intents a "pokerwork" but has an oddball stepped keyboard,wood & wire levers, MOP buttons and a large "push in" air button.

I used to have one of those myself, that I really loved until I let a friend have it for a while and he got it retuned...  :(

Mine was in black-natural with Bandoneon (octave) tuning and labelled "Voces de Bandoneon", but they'd already been superseded by model No. 7565/21/8 with a "Hohner keyboard" in the catalogue I'm talking about:

"Polished natural case with poker work designs. Hohner keyboard, single plates with steel or bronze reeds, substantial bellows with modern pinlock and leather straps.

These instruments can be supplied in the colour:

black-natural with the additional mark "S" [probably "Schwarz" = black] in octave tuning."

Quote
Perhaps you will tell me how to get a picture from PC onto these pages ...

I'm frustrated with the small results I'm getting on here, but I'm using Photobucket.com to host mine at the moment.

Quote
Do not get excited about the Forbes catalogue - I only have a couple of pages from it, relating mainly to Black Dot/ Trichord plus a couple of typewritten stock lists ...

That's a pity, it sounded promising.

Quote
(mentions a s/h Soprani four row in B/C/C#D for £35 !)

The only Scottish 4-row Paolo Soprani that I'm aware of would be James Brown's, and my speculation has always been that that must have been B/C/C#/D (giving him A and E with G and D fingering) so I'm glad to hear of a documented example.

Quote
Regarding the Swastikas - as you say they were on all Black Dots, albeit in a stylized form, to fill the gap under the "Double Ray" but I cannot recall seeing them on any Ericas.

They're only ever on Black Dots, never on Ericas.

edited photos
Title: Re: Pokerwork History
Post by: triskel on September 08, 2008, 02:10:42 AM
And why the heck put the swastika on an item intended solely for the English speaking market, in the decades after WW2?

It does seem bizarre, and I'm not categorically saying that it is intended to be a Nazi swastika, but the Double-Ray did appear at just the right time for it to be one...

Maybe nobody noticed?   ???
Title: Re: Pokerwork History
Post by: Malcolm Clapp on September 08, 2008, 01:36:57 PM
Many thanks for the info, Stephen.
Title: Re: Pokerwork History
Post by: triskel on September 08, 2008, 03:39:10 PM
Despite the information you gave, I am still wondering about one model that I have. It is to all intents a "pokerwork" but has an oddball stepped keyboard,wood & wire levers, MOP buttons and a large "push in" air button.

I used to have one of those myself, that I really loved until I let a friend have it for a while and he got it retuned...  :(

Mine was in black-natural with Bandoneon (octave) tuning and labelled "Voces de Bandoneon", but they'd already been superseded by model No. 7565/21/8 with a "Hohner keyboard" in the catalogue I'm talking about:

"Polished natural case with poker work designs. Hohner keyboard, single plates with steel or bronze reeds, substantial bellows with modern pinlock and leather straps.

These instruments can be supplied in the colour:

black-natural with the additional mark "S" [probably "Schwarz" = black] in octave tuning."

Got it!

I found a few more Hohner catalogues today, including a French one from the late 1920s (possibly May 1927 from the printer's mark, but certainly after the 1926 Philadelphia Exposition and before the "Hohner keyboard") and it illustrates and lists this model:

"No. 3865/21/8. 21 touches, 8 basses, Boîte ornée de superbes dessins pyrogravés en teinte marron, Clavier découvert, Soufflet très robuste de 16 plis. Sonorité homogène bien timbrée.

Ce modèle peut aussi ètre livré dans les teintes et exécutions suivantes:
Rouge triple voix
Vert double voix ayant dispositif de basses couplées
Noir accord Octave spécial très grave et puissant"
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 04:57:06 AM
1. Why is the modern style pokerwork designated model #2815 in the USA and #2915 in UK and elsewhere? Is there a difference?

"No. 2815" (or "No. 2815 1/2") was the original German designation for the model, which (apart from the absence of fingerboard decoration and the anchor + "Marca Regtrd" logo) isn't significantly different.

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/HohnerMarcaRegtrd.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/HohnerMarcaRegtrd.jpg)

Quote
2. Marca Registrada. Roughly translated as "Trade Mark" I assume, but why in (?)Spanish/Portuguese and not in German? Could it be that this design was originally intended for the South American market? ... Kurt also told me that he sometimes received shipments from Germany incorrectly consigned and meant for the Hohner agent in Argentina. If  Marca Regisrada models had indeed been intended for the South American market, maybe that's why so many of them are found in Australia.

Quite possibly those particular pokerwork designs were originally intended for the South American market, in fact I used to have an octave-tuned one with a metal label in Spanish reading "Voces de Bandoneon" (= "Bandoneon tuning"), but you seem to find them everywhere, and the 2815 I have at the moment was originally sold in Portugal!

Quote
The blond pressed wood pokerworks are quite commonly found in Australia. According to the former longtime Hohner agent in Australia, Kurt Jacob, he once told me that he had a large shipment of both single row (#1140) and double row (#2915) models with this finish that arrived just before the outbreak of WWll (1939). These were soon removed from the shelves, not to reappear for sale until after the end of the war.

Of a number of these shown to me over the years, several had retail receipts from the late 1940s, but Kurt insisted that they were built prewar. The design of these is of the latest blond Hohners I have seen, the same as in some postwar Hohner catalogues before the c1955 (?) introduction of the black and gold pokerwork.

The earliest evidence that I have for "# 2815" is a small German "Hohner Handharmonikas" catalogue that has a revised 1st January 1938 price list tacked in (though some of the models illustrated are from earlier in the decade, and one has an emblem that I'd associate with the 1936 Berlin Olympics on it), which lists "No. 2815/21/8/2" (so the catalogue must date from 1936-7).

The easiest way to tell the difference between pre- and post-war examples of "No. 2815" (and other similar models) seems to lie with the "Patent applied for" combined fastening hooks/feet that hold the bass cover in place on the 1930s ones:

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100012-2.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100012-2.jpg)          (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100013.jpg)

Whilst the later ones have seperate feet, and the cover is held on with a screw and washer:

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Hohner2815bassendpostwar.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Hohner2815bassendpostwar.jpg)

edited photos
Title: Re: Pokerwork History
Post by: finnhorse on September 09, 2008, 10:20:38 AM
According to "Ewig jung trotz vieler Falten", colloquialised to "History Unfolds", the first "pokerworks" were about in in 1914 but not as we now recognise them.
They are listed  as the "Holzbrand" and, apart from the grille, are very similar to the Hohner "Koch" of 1929/31. They share identical internals and keyboards, only the embossed patterns of the casings differing, the Koch having traditional roses and mitred corners without metal cappings and two less bellow folds.
... Although the term Pokerwork is now the norm I have never seen the word actually used by Hohner, only Holzbrand and Goldbrand??

Frankly I'm astonished at how badly wrong the book is about the instrument in those photos, which looks like a 1929/31 model because that's just what it is, displaying all the features of Hohner's "Patent applied for" of that era - I know exactly how they're made because I've got one:

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100012.jpg)

... and I've got the catalogue that describes these new features!

The model is one of Hohner's Series 7200, and the correct catalogue designation (circa 1929-30) is "No. 7215/21/8", described as:

"Polished natural case with beautiful poker work designs (anemony pattern) Hohner keyboard, interior locking device, single plates with steel or bronze reeds, substantial bellows, bellow frames covered with cloth and leather straps."

and
 
"Instruments with the numbers 21/8 and 21/12 of the above series are also supplied in the colours:
black-gold with additional mark "G"
or walnut-gold with additional mark "NG"
In addition these two types will be supplied with octave tuning."

Whilst the old Koch "Burnt-Wood" (as they described them in their catalogue) accordions were rather fancier, like this one that I have (the reeds bearing Koch's mark, not Hohner's):

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/P10100162.jpg)

Quote
So far as I see the only difference I see between these and the "Honey Coloured " ones that you mention is that the latter were fitted with todays  current small framed bellows and were embossed with the early Marca Registrada/Hohner Accordeon/ "Kalbe" Anchor logo and "Shell Pattern, the same as early black and gold models.

The origins of those models are very apparent in similar designs also shown in the 1929-30 catalogue, all with the small-framed bellows - "No. 7665/21/8" has the same "blue bell pattern" poker work design and Stradella corners, already available in optional black-gold, whilst the "modern" metal grille can be seen on others such as "No. 3515 1/2". The same catalogue also shows single-row melodeons with the same "star pattern" poker work on the sides as today's ones.

Quote
I have never fathomed out exactly when the equivalent celluloid "Toilet seat" versions were first produced I know they were about in the early fifties, even as early Double Rays.

Gold, silver, white, black, blue, pink or green "Celluloid veneer instruments with Hohner keyboard" appear as early as the 1929-30 catalogue, as model Nos. 120 - 180.

Quote
BTW  I think strap brackets were only fitted by the dealers (pity some of them had little idea!) and that original thumb sraps are always rivetted onto plastic & late wooden  keyboards/screwed onto early wooden ones. 

As one of "the dealers" for 35 years, I can confirm that that used to be the case.

Triskel, do you have any photos of the bass side of the Hohner box in the top picture?

I recently purchased a Concertone that looks very similar, save for the branding.  I thought it was a re-badged 1920s-era Hohner product.  Concertone was the brand given by Montgomery Ward for all their musical instruments, outsourced to different plants across Europe and the US.  The differences I can spot are 1) non Hohner-like sound hole pattern in the bass panel (the spreads seem too close together) 2) slightly different pressed wood pattern 3) difference in keyboard shape and 4) the air button, which from the photos I have (which are lousy) seems to be a button, rather than a lever.  They made other boxes for export not bearing the Hohner name.

(http://i22.ebayimg.com/07/i/001/09/34/3398_1.JPG)

(http://i23.ebayimg.com/07/i/001/09/34/5c87_1.JPG)

(http://i7.ebayimg.com/02/i/001/09/34/1a77_1.JPG)

(http://i14.ebayimg.com/08/i/001/09/34/25f3_1.JPG)

I'll know more when it arrives hopefully this week.
Title: Re: Pokerwork History
Post by: Theo on September 09, 2008, 10:40:37 AM
Not just a different keyboard shape, but a completely different keyboard action, which probably means it is the type of action which was replaced by the one Stephen describes as being new in 1929/30.
Title: Re: Pokerwork History
Post by: pipives on September 09, 2008, 11:16:39 AM
I don't know much about the history of really old hohners, but I'm finding this topic really really interesting!
Title: Re: Pokerwork History
Post by: finnhorse on September 09, 2008, 12:27:41 PM
That's basically what I meant by 'shape' because the open action wouldn't fit inside the case-style closed keyboard.  I'm dying to know what the reeds look like.  It comes with a booklet dated 1924. 
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 01:50:46 PM
Triskel, do you have any photos of the bass side of the Hohner box in the top picture?
finnhorse,

I have, in fact it's in my post that you're quoting ...


(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/p10100012-1.jpg)


... but it's not going to help you much ...

Quote
I recently purchased a Concertone that looks very similar, save for the branding.  I thought it was a re-badged 1920s-era Hohner product.  Concertone was the brand given by Montgomery Ward for all their musical instruments, outsourced to different plants across Europe and the US.  The differences I can spot are 1) non Hohner-like sound hole pattern in the bass panel (the spreads seem too close together) 2) slightly different pressed wood pattern 3) difference in keyboard shape and 4) the air button, which from the photos I have (which are lousy) seems to be a button, rather than a lever.
 
... since the Concertone in your pictures is a pre-Hohner Koch, very similar to their model "No. 42" in my U.S. Koch catalogue from the beginning of the 1920s (since it contains a loose-leaf price list dated July 1 1921). That wind-key is typical of Koch by the way.

Quote
They made other boxes for export not bearing the Hohner name.

They most certainly did, and later Concertones were built by Hohner.

I'm dying to know what the reeds look like.

I expect it will have the Koch "Mira" (a mountain antelope, or chamois) trade mark stamped into zinc reedplates, though the reeds may be brass - it says "Genuine Ajax Reeds" in the catalogue!
Title: Re: Pokerwork History
Post by: finnhorse on September 09, 2008, 02:07:43 PM
Thank you for the pointer to the photo.  I read the thread yesterday and failed to re-read before posting.   It was early here.  No coffee = no sympathy, I know I know.. :)

Upon arrival, if it would be helpful or interesting to anyone, I could post actual dimensions of the bellows and blocks, and photos of the guts.  It needs work, obviously.  I've searched around online and can't find a list of dates/factories for the Concertone accordion line.  The saxes and other brass instruments seem well documented by comparison.  I know the factory changed from Bohemia to Czechoslovakia at some point.  If this is a pre-Hohner Koch, and not Hohner, that would imply 3 different factories.  The later celluloid diatonic models look just like old Delicias, and I found one which looks more like something from Klingenthal..  :-\ 
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 02:25:12 PM
Upon arrival, if it would be helpful or interesting to anyone, I could post actual dimensions of the bellows and blocks, and photos of the guts.

The catalogue gives only "Top 11 x 5 1/2 inches."

Quote
If this is a pre-Hohner Koch, and not Hohner, that would imply 3 different factories.  The later celluloid diatonic models look just like old Delicias, and I found one which looks more like something from Klingenthal..  :-\ 

That wouldn't surprise me at all, indeed often not all "house-brand" instruments in the same catalogue are from the same factory, and sometimes not even the same country!
Title: Re: Pokerwork History
Post by: finnhorse on September 09, 2008, 03:11:58 PM
I'm confused, the catalog you have: are those the dimensions for your box or mine?  A Hohner catalog, a Koch catalog or a Montgomery & Ward's?

I should have said 4 factories were likely.  Those being Koch, then Hohner Trossingen, Czech., and Klingenthal at some point.  I think multiple plants were operating simultaneously in the DDR and Czech. for sure, and if Hohner bought the Koch works along with the rest of the company, then perhaps multiple plants were working in the beginning as well but it's all speculation.  I have not seen any post-war obvious Hohner Concertones.  But it would make sense if they owned the Koch factory and their own Hohner plant, and made their parts differently in each factory, further confounding the dating being attempted.

Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 03:52:10 PM
I'm confused, the catalog you have: are those the dimensions for your box or mine?  A Hohner catalog, a Koch catalog or a Montgomery & Ward's?

Sorry, I've modified my post to (hopefully) make it more evident that I'm talking about model "No. 42" in a U.S. Koch cataloge, from the beginning of the 1920s. (Though the measurements of my Hohner are exactly the same!)

Quote
I should have said 4 factories were likely.  Those being Koch, then Hohner Trossingen, Czech., and Klingenthal at some point.

I don't have a Montgomery Ward catalogue (and I do know what use most of the originals got put to!) but I'd expect to see models from more than one factory in any given copy of it, though not identified as such - that would have been quite usual with "house brands", and still is for that matter!
Title: Re: Pokerwork History
Post by: finnhorse on September 09, 2008, 04:08:58 PM
All clear now.  Thank you for the Koch reference.  I thought Hohner had already acquired Koch by this time and was producing exports slightly differently to avoid stepping on their own patent.  The overlap between the two is a fuzzy zone.

As for the MW catalogs, well... they're not exactly what you'd call "ultra-soft.."   ;D
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 04:37:53 PM
I thought Hohner had already acquired Koch by this time and was producing exports slightly differently to avoid stepping on their own patent.  The overlap between the two is a fuzzy zone.

No, like I said, Koch were officially taken over by Hohner on 1st January 1929. Then it starts getting fuzzy...

Quote
As for the MW catalogs, well... they're not exactly what you'd call "ultra-soft.."   ;D

Yes, but then again, you can't read the "ultra-soft" stuff...  ;)
Title: Re: Pokerwork History
Post by: Pete Dunk on September 09, 2008, 07:38:45 PM
Yes, but then again, you can't read the "ultra-soft" stuff...  ;)

You can read this one. (http://www.gadget-box.com/images/mind-trainer.jpg) ;D

I'll get me coat ...
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 08:36:27 PM
I'll get me coat ...

Aye, thy'd better! T'tone o' yon thread's gone right down't tubes...  :o
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 09, 2008, 10:14:25 PM
<a href="http://s467.photobucket.com/albums/rr33/Bruce_almighty_album/" target="_blank">[img width= height= alt=Bruce_almighty_album" border="0]http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH013.jpg[/img] (http://<a href="http://s467.photobucket.com/albums/rr33/Bruce_almighty_album/" target="_blank"><img src="http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH013.jpg" alt="Bruce_almighty_album" border="0" /></a>)[/url]
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 09, 2008, 10:20:08 PM
As you can see, I am not having much joy with this Photobucket business.
Rather than telling me to play in the Sandbox, can somebody tell me what to click to get photos from there to here? (By PM if need be, to save messing this page up any more)
Title: Re: Pokerwork History
Post by: triskel on September 09, 2008, 10:33:03 PM
As you can see, I am not having much joy with this Photobucket business

You got one of them right, but the problem is that you've broken up the url of the other one. Mind you, what you need to use is the fourth option, the "IMG Code", and post that directly here, like this:

(http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH013.jpg)(http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH014.jpg)(http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH015.jpg)(http://i467.photobucket.com/albums/rr33/Bruce_almighty_album/KOCH016.jpg)

That's a Hohner model "No. 3865/21/8" just like the one I used to have - it's got the black paint too, so is it in octave tuning?

I've been finding out a bit more about Hohner and Koch in the meantime, but it'll have to wait 'cos I've a session to go to...  ;D
Title: Re: Pokerwork History
Post by: triskel on September 10, 2008, 02:45:04 AM
Right, back from my session - we start and finish late around here!  ::)

It seems that Koch was the more modern and "go ahead" firm, as well as the second largest producer (after Hohner) and "the best equipped accordion factory in the world", with designs that Hohner was later to make famous. It is claimed in "Ewig jung trotz vieler Falten" (p. 131) that "The Koch factory and its entire workforce were integrated into the Hohner production in 1927", though that may be a misprint as elsewhere (like "Harmonica Makers of Germany and Austria" p. 96) it says that "The agreement for their take-over by Math. Hohner AG, dated Dec. 15th 1928, spelled the end of the famous And's Koch AG. Officially on Jan. 1, 1929 harmonica giant Hohner took possession of the Koch enterprise for 2,050,000 Goldmark", and the last Koch catalogue was that for 1928.
Title: Re: Pokerwork History
Post by: Waltham on September 10, 2008, 09:31:12 PM
As I suspected, this forum already has a melodeon history database.  It's called triskel.
Title: Re: Pokerwork History
Post by: an bosca ceoil on September 11, 2008, 12:47:21 AM
Mind you, what you need to use is the fourth option, the "IMG Code", and post that directly here, like this:
Thank you!
After reading that, I did what I should have done in the first place, i.e. "Read the instructions" ( it is all in the HELP/FAQ).

That's a Hohner model "No. 3865/21/8" just like the one I used to have - it's got the black paint too, so is it in octave tuning?
It is not octave tuned. Reeds are early T type. The bass block fixings seem compatible with the wooden levers - a slotted extension retained by an eye.
So what date would you place on it, do you suppose that it was something they brought out as a "Nostalgia" model with old fashioned ends?
Bruce
Title: Re: Pokerwork History
Post by: triskel on September 11, 2008, 01:01:31 AM
That's a Hohner model "No. 3865/21/8" just like the one I used to have - it's got the black paint too, so is it in octave tuning?
It is not octave tuned. Reeds are early T type.

I guess Hohner didn't always adhere strictly to their own "colour coding"...  ::)

Quote
So what date would you place on it, do you suppose that it was something they brought out as a "Nostalgia" model with old fashioned ends?

It'll be from the late 1920s, and just before they brought out the "Hohner keyboard" - I'll say 1927-9 for the moment.
Title: Re: Pokerwork History
Post by: triskel on September 20, 2008, 05:56:34 AM
In the meantime I've sent an email to one of my German contacts, Martin Häffner, Director of the Harmonika Museum at Trossingen (and co-author of both "Ewig jung trotz vieler Falten" and "Harmonica Makers of Germany and Austria"), with a few specific Hohner-related questions. He has "important work" to deal with this month, but has promised me a reply in October.
Title: Re: Pokerwork History
Post by: triskel on October 01, 2008, 03:14:48 AM
I should have said 4 factories were likely.  Those being Koch, then Hohner Trossingen, Czech., and Klingenthal at some point.

I don't have a Montgomery Ward catalogue ...

And having said that, I've now found some loose pages of musical instruments from post-war American mail-order catalogues, including a 1949 Ward's, that I bought off eBay. I bought them because that one shows a 2-row "Vienna style push and pull accordion" that you could easily take for a Delicia "Popular", but it isn't Czech, it's the rather funky Italian model that Delicia must have copied (which is often seen badged Frontalini, or Scandalli, etc.)
Title: Re: Pokerwork History
Post by: finnhorse on October 01, 2008, 05:14:58 PM
Quote
...shows a 2-row "Vienna style push and pull accordion" that you could easily take for a Delicia "Popular", but it isn't Czech, it's the rather funky Italian model that Delicia must have copied (which is often seen badged Frontalini, or Scandalli, etc.)

Do you mean that odd, chunky, refrigerator-looking box, with a metal fingerboard?  Usually cased in brown celluloid, and Frontalini stamped in a ring sort of logo?  I think I know the box you're talking about.  I see them for sale in Oz and NZ ebay very frequently, almost always in B/C tuning.  I always figured they were Czech rebadged with an italian name because they look so odd for Italy.

And MW was selling those?  Are the MW ones badged Concertone? 
Title: Re: Pokerwork History
Post by: triskel on October 01, 2008, 08:12:29 PM
Quote
...shows a 2-row "Vienna style push and pull accordion" that you could easily take for a Delicia "Popular", but it isn't Czech, it's the rather funky Italian model that Delicia must have copied (which is often seen badged Frontalini, or Scandalli, etc.)

Do you mean that odd, chunky, refrigerator-looking box, with a metal fingerboard?  Usually cased in brown celluloid, and Frontalini stamped in a ring sort of logo?  I think I know the box you're talking about.  I see them for sale in Oz and NZ ebay very frequently, almost always in B/C tuning.  I always figured they were Czech rebadged with an italian name because they look so odd for Italy.

And MW was selling those?  Are the MW ones badged Concertone? 

The very one!

(http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Frontalinidiatonic.jpg) (http://i17.photobucket.com/albums/b66/StephenChambers/Accordions/Frontalinidiatonic.jpg)

Though you'd get them in other colours too, like red or black.

The one in the 1949 Ward's catalogue is listed in with the Professional Quality Orchestra and Parade Drums and doesn't appear to have a brandname on it, though the description reads "This popular instrument is made by master craftsmen who make our Francini Piano accordions" and "Plays in key of C and G."
Title: Re: Pokerwork History
Post by: squeezebox63 on October 07, 2008, 11:21:33 PM
My g/c hohner pokerwork says made in switzerland.?
Any one know when they were made there.
It has a plastic keyboard, w rivets on thumb strap.
I don't know the age but its in great shape and a great player as I think they all are.
SimplePortal 2.3.5 © 2008-2012, SimplePortal