Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Lester on November 17, 2011, 07:29:17 PM

Title: Black Buttons
Post by: Lester on November 17, 2011, 07:29:17 PM
I am trying to make a stealth melodeon, my Pokerwork is now sprayed satin black but I would like it to have black buttons as well. So, I can source new white buttons but how can I make them durably black?

Suggestions on a postcard or posted here please.
Title: Re: Black Buttons
Post by: pikey on November 17, 2011, 07:58:30 PM
Dino Baffetti might have black buttons, they have plenty of other colours!
Title: Re: Black Buttons
Post by: Telemorris on November 17, 2011, 09:14:20 PM
CGM has these (http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#17) though they're shiny. You could pick up some of these buttons and buff them with some steel wool to take the shine off.
Title: Re: Black Buttons
Post by: Lester on November 17, 2011, 11:40:12 PM
I know I can buy black buttons but I need to fit them to a pokerwork so really need to blackify some pokerwork buttons.
Title: Re: Black Buttons
Post by: Telemorris on November 18, 2011, 12:20:56 AM
Here in the States we have a plastic  dip you can buy at the Hardware store. Depending on how thick the stuff is you might be able to thin it a bit and then dip the buttons. I'd probably rough up the surface of the button before doing so. I think a dip like this is more likely to withstand finger abrasion better than paint or a dye.

Then again, You might just swap out the Pokerwork buttons for these (http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#4). I'd be willing to bet some heat will remove the original buttons from the keyboard mechanism.
Title: Re: Black Buttons
Post by: pikey on November 18, 2011, 12:31:57 PM
The power of Google search.....

http://www.krylon.com/products/fusion_for_plastic/


Worth a try?

Cheers,

Pikey
Title: Re: Black Buttons
Post by: Simon on November 18, 2011, 01:46:15 PM
Permanent marker? For PVC SEM vinyl dye seems to work. Apparently you can even paint PVC with (almost) boiling ritdye, which is the stuff used for tie-dye. Not sure if it works for other types of plastic.
Title: Re: Black Buttons
Post by: ACE on November 18, 2011, 05:15:19 PM
Have a play around with some black shrink film or some of this newfangled photographic vinyl that they use to sign write vehicles now, it seems pretty thin stuff and if you can get some black dots it might just do the trick.
Title: Re: Black Buttons
Post by: Theo on November 18, 2011, 05:36:07 PM
I've just sold a set of (white) buttons to someone who painted the buttons with Hammerite Smooth Finish which left the buttons with a stick feel.

I'd just take the buttons off and replace with black as suggested by Telemorris.
Title: Re: Black Buttons
Post by: Thrupenny Bit on November 18, 2011, 09:53:53 PM
I'm sure I've seen black buttons in Loffet's ebay store if you need some
Q
Title: Re: Black Buttons
Post by: Bobtheboat on November 18, 2011, 11:07:18 PM
I've always thought those abalone (sp?) buttons you see on some posh boxes are really cool. I love the idea of a 'stealth' melodeon Lester, I hope we're going to see some photos when it's done! Bob
Title: Re: Black Buttons
Post by: RGF on November 19, 2011, 04:50:10 AM
But you do realize, I hope, that if the entire instrument is well and truly black, none of the sound will be able to escape.

Bob
Title: Re: Black Buttons
Post by: Simon on November 19, 2011, 09:27:53 AM
With winter coming, shouldn't a stealth melodeon be white?
Title: Re: Black Buttons
Post by: Lester on November 19, 2011, 09:41:52 AM
Thanks for all the ideas guys. I will investigate CGM for treble buttons but will probably still have to colour the bass ones as they seem to be pokerwork specific.

Story so far below from eBay wreck to Penguin of Death (http://www.harpercollins.co.uk/Titles/36228/the-penguin-of-death-edward-monkton-9780007234646) Special

Title: Re: Black Buttons
Post by: Thrupenny Bit on November 19, 2011, 10:24:11 AM
Looks to be a nice finish on the main box.
I understand where Lester's coming from. My mountainbike is black -  black forks, frame, stem, seatpost etc. it is a known fact in mountainbike circles that ' a black stealth bike is faster....'
Fact!
 ;)
Q
Title: Re: Black Buttons
Post by: rees on November 19, 2011, 10:25:31 AM
Let us know how you get on with colouring the buttons, Lester.
I have a similar problem with my Roland FR-18.
The buttons are dark grey but I would like a row of three white buttons across the middle.
Unscrewing the buttons, I find that they are Roland specific with a machine thread, so none of the Italian buttons will fit.
Roland say they have no white buttons so it looks like a paint job.
Title: Re: Black Buttons
Post by: Lester on November 20, 2011, 08:12:22 PM
So after suggestions here and help from Google I have settled on Plastikote Super Primer and Matt Black (http://www.plasti-kote.co.uk/Product/pcode---4181) for my first experiment. Picture below from first try with some old buttons, first learning point is to leave then to harden for the 24 hours recommended not 2 hours, so the finish is less good than it was before I fitted the arms  :(

The finish seems firmly fixed but I have fitted 4 bass buttons to the Penguin of Death Pokerwork (c) and will road test it for a week or two before trying the treble end.
Title: Re: Black Buttons
Post by: blafleur on November 21, 2011, 04:49:08 PM
Very curious to see how well the finish holds up to use.
Title: Re: Black Buttons
Post by: waltzman on November 21, 2011, 06:01:21 PM
She already looks good to me.  I think you are going to miss those white buttons.
SimplePortal 2.3.5 © 2008-2012, SimplePortal