Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: docEdock on November 21, 2011, 07:23:43 PM
-
Are there sources on this side of the pond (other than The Button Box and Hohnerusa.com) for Pokerwork plastic valves? What about precut leather valves or sheet leather for cutting valves?
Doc
-
House of Musical Traditions shows some leather assortments, but I see no plastic. Might be worth checking. As for making your own leather, I've heard that the material must be cured or treated (or whatever it's called) in a special way that will leave no residual corrosive salts in the leather. I use plastic or synthetic, so my knowledge of this is very much less than many others here, and I'm sure someone will chime in on that one.
There's also a fellow in Canada who stocks ample supplies of a great variety of bits....Frank Romano, at FRM Enterprises, I think it's called.
Hope this helps.
Bob
-
Pretty sure Frank only sells to dealers or builders.
-
Here is someone on E-bay that sells leather valves and other accordion parts!
http://stores.ebay.com/Rainier-goods/Accordion-parts-/_i.html?_fsub=2981258018&_sid=203444408&_trksid=p4634.c0.m322
-
Here is someone on E-bay that sells leather valves and other accordion parts!
http://stores.ebay.com/Rainier-goods/Accordion-parts-/_i.html?_fsub=2981258018&_sid=203444408&_trksid=p4634.c0.m322
I have used this seller's valves in my recent Supertone rebuild.....they seem to be of very good quality.
-
Charlie Marshall will send stuff to the USA I think. Valves are very light and cost little to send by post.
-
I have purchased from Frank Romano on two occasions -- once some bellows, another time some valves & gasket & such. I was left with the notion, however, that it was something of an inconvenience for him to sell tiny amounts to hobiests.
All of my dealings with Charlie at CGM have been exemplary. He's been most helpful, and I've been somewhat surprised at how quickly and inexpensively my things have arrived from Scotland to the U.S.
Bob
-
Thanks for the information.
In a phone call to The Button Box I learned that they sell the plastic valves in single quantities. They suggested using the Hohner catalog to determine how many of which size plastic valves I need. For leather valves they referred me to Frank Romano but it seems that Charlie Marshall may be a better fit for my leather needs.