Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: greybox1 on November 25, 2011, 12:20:41 PM

Title: HOHNER HA114
Post by: greybox1 on November 25, 2011, 12:20:41 PM
My hohner pallets seem to  lift too high causing them to hit the grill.

Is this normal for these melodeons? I was thinking I might put some felt behind buttons, is this an idea and what sort of material would be best?

Thanks
Title: Re: HOHNER HA114
Post by: baz parkes on November 25, 2011, 12:23:49 PM
My hohner pallets seem to  lift too high causing them to hit the grill

Thanks

Standard practice often seems to involve removing the grill.... >:E

Baz
Title: Re: HOHNER HA114
Post by: Rob2Hook on November 25, 2011, 12:35:28 PM
I have one that does that!  i tend to play with fingers flat on the fingerboard so that the buttons don't go down into the holes - cheapest cure.  if not, have a search for Theo's excellent treatise and photos on how to limit the action of a Hohner.

Rob.
Title: Re: HOHNER HA114
Post by: Theo on November 25, 2011, 01:25:18 PM
I have one that does that!  i tend to play with fingers flat on the fingerboard so that the buttons don't go down into the holes - cheapest cure.  if not, have a search for Theo's excellent treatise and photos on how to limit the action of a Hohner.

Rob.

Unfortunately it doesn't work on a 114.

Just chuck the grill away.
SimplePortal 2.3.5 © 2008-2012, SimplePortal