Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Ebor_fiddler on September 05, 2008, 08:59:22 PM

Title: The Naming of Parts
Post by: Ebor_fiddler on September 05, 2008, 08:59:22 PM
This stems from a conversation I had with Theo at Whitby, when I spoke of something which my motor-biking days had made me expect to be called "valves" but in the UK are usually called something else. The term "valves" meaning those flappy bits which stop the air going the wrong way through the reeds (ie  -valves!). Could we have some sort of lexicon of terms and their meanings? Or has it been done already and I missed it?

Chris.
Title: Re: The Naming of Parts
Post by: Pete Dunk on September 05, 2008, 11:46:44 PM
I believe our American cousins refer to them as 'flappers' which is a perfect onomatopoeia to describe their function. 'Valves' is, I thought, the correct terminology in UK English or are we at cross-purposes? Valves, or flappers, are, as I understand it, leather or plastic 'foil' strips that prevent air leakage through non-sounding reeds paired on the same button or key.

When you speak of 'valves' is your concept more like that of the accordion pallets or concertina pads that lift to open an orifice through which air can pass? I understand this terminology too but I've not mixed the two up before. Different technology, entirely different concept. Cross contamination of terminology is really too simplistic to be honest, this isn't an internal combustion engine we're talking about here! I do hope my reply doesn't sound harsh, that's really not the intention.

Pete.  :)
Edited to add:

Incidentally this would be better posted in the Instrument Construction and Repair Forum ...
Title: Re: The Naming of Parts
Post by: triskel on September 06, 2008, 02:43:30 AM
Could we have some sort of lexicon of terms and their meanings?

That might require some sort of standardisation of naming that simply doesn't exist. :(

In fact there's no consensus on the definitions of instruments, let alone the constituent parts of them. It all depends on who you're talking to...
Title: Re: The Naming of Parts
Post by: Lester on September 06, 2008, 09:30:15 AM
As my first leap into my co-FAQ-monger role I intend to do a Naming of the Parts FAQ and will endeavour to do photos and as many alternative names as possible. Off on holiday for a week in 1 hour so will start on my return.
Title: Re: The Naming of Parts
Post by: Lester on September 06, 2008, 09:30:32 AM
As my first leap into my co-FAQ-monger role I intend to do a "Naming of the Parts FAQ" and will endeavour to do photos and as many alternative names as possible. Off on holiday for a week in 1 hour so will start on my return.
Title: Re: The Naming of Parts
Post by: Andy in Vermont on September 06, 2008, 01:18:31 PM
I believe our American cousins refer to them as 'flappers' which is a perfect onomatopoeia to describe their function. 'Valves' is, I thought, the correct terminology in UK English or are we at cross-purposes? Valves, or flappers, are, as I understand it, leather or plastic 'foil' strips that prevent air leakage through non-sounding reeds paired on the same button or key.

Pete,
The parts that we call "flappers" are the "pallets" -- the leather or plastic strips are called "valves" here as well.
Andy, in "New" England
Title: Re: The Naming of Parts
Post by: Pete Dunk on September 06, 2008, 06:25:52 PM
Thanks for clearing that up Andy, just goes to show how easy it is to get muddled with different terminologies!  :o
Title: Re: The Naming of Parts
Post by: Ebor_fiddler on September 07, 2008, 01:51:00 PM
I had intended to put this in the "Wish List". Obviously my brain was not engaged! Thank you Lester, that was just what I was asking about. If I am asking stupid questions, it helps if I am at least asking the question I intended to ask by using words "understanded of the people" as Cramner puts it!

Chris.
Title: Re: The Naming of Parts
Post by: Theo on September 07, 2008, 01:56:56 PM
You did put it in the wish list, and I moved it here, as it was developing into a general discussion.

In general its likely that most things which might end up in a wish list would need some discussion first.
Title: Re: The Naming of Parts
Post by: Ebor_fiddler on September 07, 2008, 10:46:14 PM
Thanks for helping my sanity Theo. And that gentleman in my last was of course Cranmer. Thank you everyone for not pointing out that my spelling was slipping along with my mind!  ::)
SimplePortal 2.3.5 © 2008-2012, SimplePortal