Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: mike delta on September 06, 2008, 06:11:29 PM

Title: Hohner one row two stop.
Post by: mike delta on September 06, 2008, 06:11:29 PM
Hi,
Can you help me with this please.
Hohner one row 2 stop. Does this imply that it has two reeds (one for each stop). What is the usual set up. Is each reed different for example is one a bass reed and the other a mid range one. Sorry about the lack of technical terms here but the fact is my knowledge is limited when it comes to a Melodeon.
Now if I may impose further. What is the set up on a four stop 1 row.
Thanks,
Mike.
Title: Re: Hohner one row two stop.
Post by: BruceHenderson on September 06, 2008, 06:41:58 PM
Hi,  Can you help me with this please.
Hohner one row 2 stop. Does this imply that it has two reeds (one for each stop). What is the usual set up. Is each reed different for example is one a bass reed and the other a mid range one. Sorry about the lack of technical terms here but the fact is my knowledge is limited when it comes to a Melodeon.
Now if I may impose further. What is the set up on a four stop 1 row.
Thanks,  Mike. 

   Hi, Mike, without seeing and hearing the box I can only guess but my guess is that it is a two-reed box (that is, two reeds sound when you play one note).  If that's the case, the two reeds would be "offset" from each other by a fraction of a tone; they would both be "midrange".  Typically a 4 stop has two middle range reeds, plus a bass reed (often called a bassoon reed) set an octave below the middle ones and also a high reed (often called a piccolo reed) set an octave above the middle ones.  So, with a 4 stop, you're actually getting sounds from three octaves each time you play a note.
Title: Re: Hohner one row two stop.
Post by: mike delta on September 07, 2008, 03:19:16 PM
Hi Bruce,
Thanx for clearing that up for me. I get the picture now.
Mike.
SimplePortal 2.3.5 © 2008-2012, SimplePortal