Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: sqwzboxstudent on December 19, 2011, 09:42:08 PM

Title: bellows
Post by: sqwzboxstudent on December 19, 2011, 09:42:08 PM
has anyone on here ever made their own bellows ???? whats the process from start to finish ?
Title: Re: bellows
Post by: tirpous on December 20, 2011, 04:16:47 AM
Yes.  These 2 links about melodeon construction, with a bit on bellows, should give you a feel for what's involved.

http://www.bergflodt.net/workshop.html (http://www.bergflodt.net/workshop.html)
http://www.youtube.com/watch?v=ZQglJZFjUsc (http://www.youtube.com/watch?v=ZQglJZFjUsc)
Title: Re: bellows
Post by: Telemorris on December 20, 2011, 10:59:36 PM
I'm about to start making some bellows for my mini-melodeon project. First step is to make or buy the folded card stock. Charlie at CGM carries the card stock if you want to buy it. He also sells the leather diamonds that are glued into all the corners. Make sure to use PVA glue as it's flexible, a necessary capability.

Process:
Put together card stock of the appropriate fold width.
Cut the card stock to the size you need - four pieces.
Some builders glue bellows tape to the inside folds for reinforcement. (Bergflot)
Assemble a frame for holding the four pieces of card stock, attach them to the frame and stretch the frame to an appropriate spacing.
Glue small corner connectors to the corners.
Glue on the leather diamonds with PVA glue. Use a block of wood shaped to the inside fold angle to press the leather into the folds. Support the card and leather from the inside while pressing.
Check the joint for every leather diamond to make sure there are no gaps or loose glue joints - fix any gaps.
Trim and shape the corners to fit them for the metal corner pieces.
Slide the metal corner pieces onto all corners.
Press the whole stack in a press to squeeze the metal corners closed, but not too tight.
Glue the decorative paper into the folds. Either individually folded and cut pieces, one for each valley or the whole side at once. Different makers approach this in different ways.
Cut and glue on the tapes to the top folds.
Press with wax paper or other separating agent between each fold to prevent gluing the folds together and ending up with a brick.
Glue the Bellows frames to the ends of the bellows checking for proper alignment.

That's as much as I can tell you off the top of my head. Others may have additional comments about what to look for. There are quite a number of threads that either talk directly about making bellows or mention their manufacture in addition to other discussions.

Good luck and keep us posted on your progress.
Title: Re: bellows
Post by: TomB-R on December 21, 2011, 04:03:54 PM
I made some as described here,
http://forum.melodeon.net/index.php/topic,1958.20.html

Recently added a photo of my corner jig at Telemorris's request.
Tom

Re Telemorris' process above - I put the paper into the folds before putting on the corner protectors.

If you look at the Bergflodt photos it's ingenious the way he uses cloth rather than paper. This means he can put that on before the corner diamonds and trim the whole side as one, then fold the cloth back whilst assembling the bellows and corner diamonds, then glue it into place before adding corner protectors and tape. Hard/impossible to do that fold back with paper.
Title: Re: bellows
Post by: Telemorris on December 21, 2011, 05:49:53 PM
I forgot to mention. You can go to the Bergflot Facebook page and find a photo album documenting his process of building bellows (http://www.facebook.com/media/set/?set=a.1759231020366.2089109.1226742509&type=3). It is very informative. Don't be put off by the 10 ton press being used to press the metal corners. He doesn't use that much pressure for that operation.
Title: Re: bellows
Post by: sqwzboxstudent on January 02, 2012, 07:35:30 PM
cheers for the links, im definetly going to give it a go, what sort of fabric would you use?
Title: Re: bellows
Post by: an bosca ceoil on January 02, 2012, 10:43:37 PM
Have a look at taffeta - you won't get the real McCoy anymore but they do synthetic version.
Just make sure that the stuff you buy does not fray when cut on the diagonal!
Title: Re: bellows
Post by: Kimric Smythe on January 04, 2012, 08:07:15 AM
I have used Japanese printed, mulberry bark paper to pattern the bellows to good effect. beautiful and tough.
http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/ (http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/)
Title: Re: bellows
Post by: Christopher K. on January 04, 2012, 08:26:58 PM
I have used Japanese printed, mulberry bark paper to pattern the bellows to good effect. beautiful and tough.
http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/ (http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/)

That's gorgeous. I've noticed (online) a few shops in the bay area offering some attractive bellows paper patterns. Seems like there is a really healthy accordion culture out there.
Title: Re: bellows
Post by: savantuk on January 06, 2012, 11:58:22 AM
I have used Japanese printed, mulberry bark paper to pattern the bellows to good effect. beautiful and tough.
http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/ (http://www.flickr.com/photos/26639011@N06/3355469290/in/photostream/)

Those bellows are staggeringly good.  Did you have a learning curve, or were you just extremely careful and painstaking??

Whatever, they are beautiful!
Title: Re: bellows
Post by: Kimric Smythe on January 06, 2012, 06:27:39 PM
The customer provided the paper (there are several stores in my area) and I shipped the paper to Germany.
 They build the paper into the bellows at the factory. I did it myself once and it took forever. I got the idea when I was at the factory several years ago. The bellows for a 86W are a perfect fit for a Hohner pokerwork.

Kimric
SimplePortal 2.3.5 © 2008-2012, SimplePortal