Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Telemorris on January 08, 2012, 03:20:21 AM

Title: How hot should the wax get?
Post by: Telemorris on January 08, 2012, 03:20:21 AM
I've looked for information about how hot to get your wax when waxing reeds and haven't found anything. Should it get smoking hot then cool just a bit, or just warm enough that it's able to flow, or somewhere in between?
Title: Re: How hot should the wax get?
Post by: blafleur on January 08, 2012, 04:54:16 AM
You don't want it to just flow, you want it to flow smoothly.  Not sure what temp I'm at, but I use the same double boiler I use for hot hide glue, which is about 145, and set it just barely warmer. There is a point where it will flow, but cools before smoothing itself out.  When the right temp, it flows fast, and dries smooth and even. I've never noticed mine smoking. 

That probably doesn't help much and maybe someone else can give more to go on, but I just experimented with different setting until I found one that worked well and marked it.
Title: Re: How hot should the wax get?
Post by: Steve_freereeder on January 08, 2012, 07:36:10 AM
I've looked for information about how hot to get your wax when waxing reeds and haven't found anything. Should it get smoking hot then cool just a bit, or just warm enough that it's able to flow, or somewhere in between?
I've recently started using a variable temperature soldering iron for waxing reeds. It has a digital temperature display and I have achieved good results using a temperature setting of 180°C. I don't know how accurate the temperature display is, but perhaps it is OK to plus or minus 10°C. Using the soldering iron at this setting seems to allow the wax to flow freely, but it doesn't burn the wax or cause it to turn dark brown.

Because of the small surface area of heating at any one time there is probably a lot of heat loss at the soldering iron bit, and I suspect that if I had a pot of wax at 180°C it would probably be too hot. Whatever method you use, if your wax starts smoking and turning dark, it is too hot.
Title: Re: How hot should the wax get?
Post by: Graham Spencer on January 08, 2012, 07:46:48 AM
In Charlie Marshall's Youtube video on waxing he says to turn off the heat as soon as the first hint of smoke appears. I do this, and it seems to work - as soon as the wax feels as if it's becoming too stiff I warm it up slightly and on we go. You certainly don't want it so hot that it darkens.
SimplePortal 2.3.5 © 2008-2012, SimplePortal