Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Rob2Hook on January 26, 2012, 05:57:03 PM
-
I was round at a mate's house last night and his box was audibly leaking (kept his left hand cool). The air button on his Saltarelle Boube wouldn't close. We pulled it apart and I was surprised to find that the pallet is on the inside of the board and worked OK with the end plate removed. It seems that the bit of ali plate used as a hinge for the button had taken on a set and, being rivetted in place can't be straightened without undue work. We bent the operating rod down a bit which has, for the moment, fixed the problem.
As a comparison we stripped my Trilly and the pallet is on the outside of the board and the button is hinged with a flap of leather. In addition there is a groove in the rear of the button to locate the lever.
I seem to recall that early models of the Dino Baffetti BP had persistent problems with the air valve pallet on the inside face - is that true? Long-term plan is to modify the button to be more like my Castagnari , or was that just the beer talking?
Discuss (takes you back to your schooldays...)
Rob.
-
Having the pallet on the inside Is a rather neat arrangement I think and usually requires less space in the action box because the lever/spring/pivot is on the reed lock side. I'm sure your problem is with the crude springy flap used to articulate the button. Sort that, and work a groove into the base of the button and you should be sorted. Also check that the part of the wire lever that the button bears on is nice and smooth, lubricating it with graphite may help too.
-
Having the pallet on the inside Is a rather neat arrangement I think and usually requires less space in the action box because the lever/spring/pivot is on the reed lock side. I'm sure your problem is with the crude springy flap used to articulate the button. Sort that, and work a groove into the base of the button and you should be sorted. Also check that the part of the wire lever that the button bears on is nice and smooth, lubricating it with graphite may help too.
(maybe slightly off topic warning): I changed Tim Edey's C#/D/D# box over to D/G before christmas. He has ALWAYS had a problem with the air button opening as some sort of vacuum when the bellows are pulled hard. I believe this is bacause the pad for the air button is on the inside and that is causing a horrible growling on the pull. I've seen and played plenty of other boxes with the same mechanism and have never come across this.
I believe the spring may be to weak for the size of the pad but cannot find a big enough spring anywhere to fit. I have spoken to the well known retailer who sells Saltarelles and gave this one to tim and had no luck.
THEO- can you help with this?
The box is currently on tour in Oz........... and it won't be back until february. If I can't get anywhere by then I'll upload some photos.
-
If the spring is too weak then I suggest making a new one out of the next size thicker of spring wire.